Precision large and small tissue grinder systems Ready-to-use Packaged in a sterile peel pouch Completely disposable Grinder tube doubles as a specimen container for transport and storage. Protective sleeve helps to contain aerosolization created during grinding. Tissue is…

The grinding vessel, a round bottom tube with 2 mm wall, has grinding chamber made of precision bore tubing and top reservoir with pouring spout, to accommodate displaced fluid. Unground walls are completely transparent. Pestle is rounded to conform to bottom of grinding chamber and is either…

Re-suspend protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles can be hand operated or motor driven Autoclavable types available Ideal for cell and tissue culture preparation Choose the best pellet pestle for your applications RNase-, DNase- and Pyrogen-free …

For grinding chemicals, drugs and gums, as well as heavier minerals in the dry state Distance between grinding plates is adjustable to vary fineness of the product Includes one set of removable grinding plates (3371J35) and toothed feed for dry material Capacity 1-10 lbs. per hour at…

The redesigned batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. The development of the mill placed particular emphasis on safety. The mill…

Perfect Grind for the Perfect Pre-Roll! Designed to optimize grinding and extraction, the Revolution 2.0 commercial cannabis grinder delivers a consistent, homogenous grind, optimal for evenly packed rolls, extractions and higher potency of the product.  The Revolution 2.0 employs a low heat,…

Grinds materials, by both impact and abrasion, that other grinders cannot Easy-to-use Very rapid grinding action Consistent particle size Air swept for easier cleaning and less thermal degradation USDA approved for NIR sample preparation Mill is designed for the rapid grinding of soft to…

The Dounce type, glass tissue grinder is supplied with two glass pestles; one with a tight inner tolernace and one with a loose inner tolernace. The loose pestle can be used for initial reduction of the tissue sample and the tight pestle can be used to fine grind the tissue and complete the homogenation.

These PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not…

The Micro-Mill® II Grinder is ideal for rapid, high speed milling of small samples from 20 to 50ml. The 1/5 horsepower (150 Watt) motor drives a stainless steel blade that quickly pulverizes bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue,…

The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes even with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. It s ubstitutes cumbersome hand mortars by a high performance drive with electronic…

Simple operation Large capacity Threaded piston minces 10 to 50 grams of non-fibrous tissue. As the piston crank is turned, tissue is extruded through a sieve screen at the bottom. Clean up is simple with non-abrasive detergent and water. Includes three sieve screens with pore diameters…

These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…

Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels…

These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action…

Sand is specially graded natural silica sand graded to retain 98% on a No. 100 (150µ) sieve, 75% on a No. 50 (300µ) 30% on a No. 40 (425µ) and 2% on a No. 30 (600µ). Specific gravity is 2.65 Packed in 50 lbs. (22.7kg) bags

Double-ended pestle is perfect for use with the Scienceware® 12-Well Tissue Disaggregator. The flat ends effectively press soft tissues through the diaggregator’s screens thereby disrupting the organ structure and producing cell isolates. Double-ended design for a wide variety of…

Process materials up to 9 Mohs Closed grinding chamber with Plexiglas window Timed or continuous operation Wet or dry grinding Mortar grinders reduce inorganic and organic substances to analytical fineness. They can mix and homogenize powders, suspensions and pastes. Grinders…

These PYREX® tissue grinders (homogenizers) are recommended for soft tissues found in the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene…

Borosilicate glass With precision made interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with…

Borosilicate glass Designed for fine particle size reductions without damage to cell nuclei Each set consists of a mortar with large reservoir and two pestles: a loose and a tight pestle. Loose pestle has a clearance of 0.0035” - 0.0055”. Tight pestle has a clearance of…

Produces a relatively coarse homogenate For cellular work where the nucleus remains intact after homogenization All glass construction * Stated clearances for the tubes and pestles are “total” not “annular”.

Stainless steel pestle with plastic knob at top, requires less effort than glass-tissue grinders Autoclavable Self-standing - mortar has flat bottom Single pestle and mortar supplied as a matched set 7, 15 and 40 mL

The Humboldt, Small, Riffle-Type Sample Splitter supports the following standards: ASTM B215, ASTM C136, ASTM C702, ASTM C778, ASTM D421, ASTM D424, ASTM D457, ASTM D806, AASHTO T27, AASHTO T144, AASHTO T248 Humboldt, Riffle-type sample splitter can be used to divide or halve dry materials such…

These motor-driven PYREX® tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. The clearance between the ground tube and pestle is approximately 0.15mm. The parts are ground to a medium grind to insure adequate abrasive qualities, yet…

Similar to 3432N01 series, but with PTFE pestle and an unground glass tube Ideal for soft tissue such as brain or liver Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit). Available in working…

Wheaton Safe-Grind plastic coated tissue grinders afford an added measure of safety over uncoated glass tissue grinders. The heavy plastisol coating protects the mortar from becoming scratched or checked, and assures you of a sure grip. More importantly, the plastic coating creates a greater safety…

Made of autoclavable CTFE/Stainless Steel Optional cordless drive unit available, see Thomas number 3411E25.

High Shear Mill pulverizes chemicals, pigments, wood, bones, paper and more Easy access for sample recovery and cleaning Microswitch prevents operation while lid is open Powerful dual speed motor, 14,000/18,000 rpm 60 minute timer, speed selector switch and amperage…

All-glass construction with ground tube Ideal for connective tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 1, 5, 8, 17 and 45 mL . * Stated clearances…

The BioVortexer is a lightweight, battery powered unit designed to be used with microcentrifuge tubes. Centrifugal pellets, precipitates, and other solids are completely dispersed in seconds by a combination of mechanical and vortex action. A new polypropylene stir rod is used with each sample. …

High quality laboratory knife mill for grinding and homogenizing Homogenous samples for accurate analysis Industrial quality for demanding applications Programmable operating parameters for reproducible results The mill is designed for the fast and efficient processing of…