Tissue Grinders
Among the various tools available, Pellet Pestles and micro pestles offer precision in grinding small tissue samples, allowing scientists to process even the most delicate specimens accurately. The glass dounce homogenizer and Potter Elvehjem grinders are revered for their ability to provide gentle but effective homogenization, preserving the integrity of the sample's cellular components.
For labs seeking convenience and sterility, disposable pestles are a go-to solution. These items eliminate the risk of cross-contamination between samples and save valuable time in cleanup, thereby supporting a more efficient workflow in the research process. Together, these tissue grinders and accessories represent a comprehensive suite of solutions for sample preparation, catering to a broad array of scientific needs.
-
1 ml Tissue Grinder, Tapered, Gnd
DWK Life Sciences (Wheaton)These tapered tissue grinders have an improved design, which incorporates a longer tapered surface on both the mortar and pestle. The conical surface allows initial size reduction followed by passage through the cylindrical section for the final homogenization step. Grinding efficiency is improved,…
-
A 10 basic Analytical Mills
IKA WorksThe redesigned batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. The development of the mill placed particular emphasis on safety. The mill…
-
Test Sand, ASTM 20-30
HumboldtSand is specially graded natural silica sand to pass a No. 20 (850µ) sieve. Specific gravity is 2.65 Packed in 50 lb. (22.7kg) bags
-
Reusable Stainless Pellet Pestles
DWK Life Sciences (Kimble)Made of autoclavable CTFE/Stainless Steel Optional cordless drive unit available, see Thomas number 3411E25.
-
Extended Handle Pestle
SP Bel-ArtPolypropylene tissue grinder efficiently homogenizes tissue and cells in microcentrifuge, centrifuge and grinding tubes. Cone tip tapers from 8.2mm (0.33") down to 2.9mm (0.12") in a length of 19.8mm (0.78") and has a rounded end Overall length: 21cm (8-1/4") Shaft…
-
These motor-driven PYREX® tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. The clearance between the ground tube and pestle is approximately 0.15mm. The parts are ground to a medium grind to insure adequate abrasive qualities, yet…
-
Mortar Grinders
RetschProcess materials up to 9 Mohs Closed grinding chamber with Plexiglas window Timed or continuous operation Wet or dry grinding Mortar grinders reduce inorganic and organic substances to analytical fineness. They can mix and homogenize powders, suspensions and pastes. Grinders…
-
Grindomix
RetschHigh quality laboratory knife mill for grinding and homogenizing Homogenous samples for accurate analysis Industrial quality for demanding applications Programmable operating parameters for reproducible results The mill is designed for the fast and efficient processing of…
-
Concrete Cylinder Molds
Gilson Co. Inc.Biodegradable Plastic Cylinder Molds for single-use applications are non-absorptive and molded as single piece units for dimensional uniformity. Rugged molds have unlimited shelf life and are weather-resistant, but contain a unique additive that allows microbes present in landfills and composting…
-
Dura-Grind Dounce-Type, Stainless Steel Tissue Grinders
DWK Life Sciences (Wheaton)Stainless steel pestle with plastic knob at top, requires less effort than glass-tissue grinders Autoclavable Self-standing - mortar has flat bottom Single pestle and mortar supplied as a matched set 7, 15 and 40 mL
-
Double Ended Pestle
SP Bel-ArtDouble-ended pestle is perfect for use with the Scienceware® 12-Well Tissue Disaggregator. The flat ends effectively press soft tissues through the diaggregator’s screens thereby disrupting the organ structure and producing cell isolates. Double-ended design for a wide variety of…
-
Micro-Mill® II Grinder
SP Bel-ArtThe Micro-Mill® II Grinder is ideal for rapid, high speed milling of small samples from 20 to 50ml. The 1/5 horsepower (150 Watt) motor drives a stainless steel blade that quickly pulverizes bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue,…
-
Potter-Elvehjem Tissue Grinder With Glass Pestle
DWK Life Sciences (Kimble)All-glass construction with ground tube Ideal for connective tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 1, 5, 8, 17 and 45 mL . * Stated clearances…
-
Potter-Elvehjem Tissue Grinder With PTFE Pestle
DWK Life Sciences (Kimble)Similar to 3432N40 series, but with PTFE pestle and an unground glass tube Ideal for soft tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 0.5, 1, 3, 5, 8,…
-
The Retsch RM 200 agate accessory is an ideal tool to have in any chemical laboratories. This accessory makes the grinding process, both wet and dry grinding, easier that in turn helps in the preparation of chemical samples.
-
Cordless Drive Unit For Pellet Pestles
DWK Life Sciences (Kimble)For all Kontes pellet pestle mixers Compact, hand-held unit Motor driven Comes complete with two “AA” batteries. Dimensions: 3” Dia. x 6” L.
-
These hand-driven PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Dounce homogenizers are particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the…
-
A11.1 Stainless Steel Cutting Blade
IKA WorksAccessory for A11 basic Analytical mill (3386E23). For pulverizing soft, fibrous grinding materials
-
Tissue Press
BiospecSimple operation Large capacity Threaded piston minces 10 to 50 grams of non-fibrous tissue. As the piston crank is turned, tissue is extruded through a sieve screen at the bottom. Clean up is simple with non-abrasive detergent and water. Includes three sieve screens with pore diameters…
-
10 ml Tissue Grinder, Potter-Elv, Coated
DWK Life Sciences (Wheaton)Wheaton Safe-Grind plastic coated tissue grinders afford an added measure of safety over uncoated glass tissue grinders. The heavy plastisol coating protects the mortar from becoming scratched or checked, and assures you of a sure grip. More importantly, the plastic coating creates a greater safety…
-
Mortar Grinder RM 200
RetschThe Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes even with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. It s ubstitutes cumbersome hand mortars by a high performance drive with electronic…
-
1mL Tissue Grinder, Dounce Type
Ace GlassThe Dounce type, glass tissue grinder is supplied with two glass pestles; one with a tight inner tolernace and one with a loose inner tolernace. The loose pestle can be used for initial reduction of the tissue sample and the tight pestle can be used to fine grind the tissue and complete the homogenation.
-
These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…
-
-
Stand Assembly for Ultra EZgrind™ Tissue Homogenizer
Ultra EZgrind™Stand Assembly for Ultra EZgrind™ Tissue Homogenizer
-
Potter-Elvehjem-Type Tissue Grinders with PTFE Pestles
DWK Life Sciences (Wheaton)Wheaton 33 low extractable borosilicate glass Precisely constructed with completely interchangeable parts Especially for use in preparation of tissue homogenates, etc. PTFE pestle for soft tissue Grinding chamber clearance is 0.1 - 0.15 mm Unit can be autoclaved …
-
AgileGrinder™ Portable Tissue Grinder
ACTGene, Inc.Feature Highlights: Three choices: ACT-AG12000 (Fixed Speed 12,000rpm), ACT-AG1500 (Fixed Speed 1,500rpm), and ACT-AG3080 (Adjustable Speed 3,000-8,000rpm) Motor driven Rechargeable battery keeps working for 10 hours Ideal for re-suspending pellets or disrupting soft tissue in…
-
The Humboldt, Enclosed Model, Riffle-type Sample Splitter supports the following standards: ASTM C702, ASTM D410, ASTM D3013, ASTM D3176, ASTM D3180, AASHTO T248 Humboldt, enclosed model with drawer pans, Riffle-type sample splitter can be used to divide or halve dry materials such as cement,…
-
Micro Grinder
Glas-ColNo sharp edges Stainless steel construction Easy-to-use Sample is placed in mill cavity, the two mill halves are pressed together and rotated in opposite directions. Mill is durable and corrosion resistant. Clearance between cutting heads is adjustable; factory preset at…
-
These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action…
-
Tissue Grinder 2ml PE Serrated Pestle
DWK Life Sciences (Wheaton)This grinder has a serrated Teflon® pestle that disperses homogenate into the mortar cylinder more efficiently. These units are precisely constructed with completely interchangeable parts, allowing for easier replacement of parts so you don't need to keep pieces matched during cleaning.…
-
For grinding chemicals, drugs and gums, as well as heavier minerals in the dry state Distance between grinding plates is adjustable to vary fineness of the product Includes one set of removable grinding plates (3371J35) and toothed feed for dry material Capacity 1-10 lbs. per hour at…