General Chromatography Equipment

Compare Tool

Select up to 3 products

HomeAll Products

General Chromatography Equipment

1 - 32 of 366
Sort
View
Show
  • Agilent Technologies

    Agilent GC fittings and GC nuts for instrument plumbing are available in brass, stainless steel, and UltiMetal Plus, and in sizes ranging from 1/16 to 1/4 inch. Application: For Gas Clean Connecting Unit This product is only available to U.S. Domestic Customers. For research use only, not…

  • Agilent Technologies

    Agilent’s engineering and testing efforts focus on these parameters when designing liners for Agilent inlet systems. Intensive liner development and testing have resulted in a set of liners that are recommended whenever new methods are being developed, when methods are being optimized, or…

  • Agilent Technologies

    The Agilent Technologies 675 uL inlet liner measuring 4 mm x 6.45 mm x 78.5 mm features a gooseneck design and facilitates direct injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It can be used…

  • Agilent Technologies

    Agilent Installation Kits for GC are designed to provide you with the essential items necessary for a successful installation while providing a substantial cost savings over individual purchases. GC Basic Installation Kit: Includes copper tubing, column nuts, two moisture traps, and five…

  • Agilent Technologies

    The Agilent Technologies gas clean installation kit is suitable for use with 2-position TCD/ECD 1/8 Inch connecting unit. Application: For TCD/ECD, 2-Position 1/8 in Connecting Unit This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

  • Topaz GC inlet liners feature revolutionary technology and inertness to deliver you the next level of True Blue Performance: Deactivation —unbelievably low breakdown for accurate and precise low-level GC analyses Reproducibility —unbeatable manufacturing controls and QC…

  • Agilent Technologies

    Small argon filter, charcoal, internally mounted, for detector gas line purge. This filters the purge gas going to the polychromator. Application: For Detector Gas Line Purge. This Filters the Purge Gas Going to the Polychromator This product is only available to U.S. Domestic Customers. …

  • ORBO(TM) 555 LpDNPH 300/150 mg sorbent tubes (W,W,W separators, O.D. x L. 6 mm x 105 mm) contain two beds of the same selective adsorbent separated by glass wool or foam, for gas and vapor sampling. The dual-layer or two-bed construction of the tube allows for any sample breakthrough to be captured…

  • Agilent Technologies

    The Agilent Technologies 35 uL inlet liner measuring 4 mm x 6.47 mm x 78.5 mm has a straight design and facilitates split-less injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It can be used with…

  • Topaz GC inlet liners feature revolutionary technology and inertness to deliver you the next level of True Blue Performance: Deactivation —unbelievably low breakdown for accurate and precise low-level GC analyses Reproducibility —unbeatable manufacturing controls and QC…

  • Agilent Technologies

    The Agilent Technologies grade 2 sintered metal filter is designed to use with Agilent instrument, to meet research and laboratory needs. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

  • Agilent Technologies

    Programmable Temperature Vaporizing Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Deactivated (silanized) glass inlet liner for capillary injection ports. Fits Agilent (5890, 6890, and 7890) Fits Finnigan (9001GCQ) Fits Varian (CP-1177 Injector) The liner is the second most important part of the inlet. It is the centrepiece of the inlet system, basically a…

  • Agilent Technologies

    Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

  • Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • The 1/4 in. NPTM square head plug fits all Sure/Pac sample cylinder sizes.

  • Manufactured for specific instruments Provide better seal Sized for appropriate liners Seals are manufactured to fit specific inlet liners for specific instruments to provide the best possible seals for reproducible conditions. Graphite seals are recommended for use at…

  • Agilent Technologies

    Our GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps…

  • The Agilent Technologies ADM flow meter replacement cartridge with assessment, is suitable for use with chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

  • Agilent Technologies

    Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

  • Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • Agilent Technologies

    The Agilent Technologies FID adapter is designed to use with flow meters. Application: For Flow Meter This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Agilent Technologies

    The Agilent Technologies 900 uL inlet liner measuring 4 mm x 6.47 mm x 78.5 mm features a single taper design and facilitates split-less injection. This liner with a glass wool ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better…

  • Agilent Technologies

    Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

  • Agilent Technologies

    Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

  • Topaz GC inlet liners feature revolutionary technology and inertness to deliver you the next level of True Blue Performance: Deactivation —unbelievably low breakdown for accurate and precise low-level GC analyses Reproducibility —unbeatable manufacturing controls and QC…

  • Agilent Technologies

    The Agilent Technologies 675 uL inlet liner measuring 4 mm x 6.25 mm x 78.5 mm features a top hole gooseneck design and facilitates direct injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It can…

  • Agilent Technologies

    The Agilent Technologies large argon filter is designed to use with polychrmator gas line. Application: For Polychrmator Gas Line This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Compare Tool

Select up to 3 products