General Chromatography, Agilent Technologies, AA General, Supplies
-
O-Ring Kit
Agilent TechnologiesBarrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…
-
Tubing & Connector Kit
Agilent TechnologiesVapor generation provides the best performance for analysis of hydride forming elements such as As, Se, and Hg for ICP-OES. VGA 77 supplies such as tubing, gas-liquid seperators, absorption cells, reagents, and maintenance supplies provide the key consumables need to receive optimal performance…
-
Tubing Assembly
Agilent TechnologiesAgilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: Sample Tubing, For PerkinElmer, FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only…
-
End Cap Assembly
Agilent TechnologiesAgilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Metal Body Nebulizers, PinAAcle Series AA System This product is only available…
-
O-Ring for Seal Plug in End Cap Assembly
Agilent TechnologiesThe Agilent Technologies O-ring has inner diameter of 1/8 Inch and is ideal for seal plug in end cap assembly. It is suitable for PinAAcle and AAnalyst 100/200/300/400/700/800, PerkinElmer AAS nebulizers & burner systems. Application: For Seal Plug in End Cap Assembly, For Metal Body Nebulizers,…
-
Inert Probe
Agilent TechnologiesProbe, inert, 1.3 mm id, PTFE-sleeved, for SPS 3 autosampler. Application: For SPS 3 Autosampler This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Air Regulator
Agilent TechnologiesThe Agilent Technologies air regulator is suitable for use with 81h-590 systems. Application: For 8-1-h-590 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
VGA-77
Agilent TechnologiesThe Agilent fully automated modular VGA 77 vapor generation accessory is used with Agilent flame AA systems to. enables rapid trace level determinations of mercury and other hydride-forming elements at parts-per-billion (µg/L) concentrations using the vapor or hydride generation technique. The VGA…
-
Single-Slot Burner Head
Agilent TechnologiesAgilent burner heads for PerkinElmer PinAAcle/AAnalyst flame AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Air-Acetylene Operation, For Air-Acetylene Elements, for Pinaacle & AAnalyst…
-
Burner Cleaning & Alignment Card
Agilent TechnologiesThe Agilent Technologies burner cleaning and alignment card is suitable for use with Agilent AA systems. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Graphite Shroud
Agilent TechnologiesGraphite shrouds for graphite furnace Atomic Absorption. Regular replacement of the shroud is recommended. A shroud in good condition will help ensure optimum performance and maximize tube life. Application: For Agilent GTA120 Zeeman Graphite Furnace, Pyrolytically Coated This product is only…
-
Pre-optic window for 4100/4200 MP-AES
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tube Holder
Agilent TechnologiesA range of rinse reservoirs and other autosampler supplies are available to upgrade probe rinsing capacity, giving you flexibility to improve the capabilities of the autosamplers used in your lab. Application: For SPS 3 Autosampler, Secures Transfer Tubing From Probe to Instrument on Arm of Probe…
-
Graphite Tube L'vov Platforms
Agilent TechnologiesAgilent graphite platforms and tubes for PerkinElmer THGA and HGA graphite furnace AA systems are batch tested to ensure they our demanding performance requirements for contamination, sensitivity, precision, electrical resistance, and lifetime. Application: For HGA Tubes with internal grooves, for…
-
Nebulizer Assembly
Agilent TechnologiesThe Agilent Technologies nebulizer assembly is made from solid stainless steel material and is used for the analysis of aqueous solutions. Application: For Aqueous Solutions, for AAnalyst 100/200/300/400/700/800, PerkinElmer AAS Instruments This product is only available to U.S. Domestic…
-
Nebulizer Spring
Agilent TechnologiesNebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For…
-
Capillary Tubing Assembly
Agilent TechnologiesAgilent capillary tubing is equivalent to PerkinElmer AA tubing, so you can be confident that it will integrate seamlessly with your PerkinElmer AS-90/90A/90plus/91/93plus/S10 autosampler. Application: Sample Tubing, For as Stainless Steel Probe, For FIAS, For AS-90/90A/90Plus/91/93Plus/S10…
-
Sample Capillary, MP Concentric neb 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Electrode Extractor Tool
Agilent TechnologiesThese graphite furnace tools are required to enable removal and replacement of the graphite electrodes or the graphite shroud. These tools are suitable for use with the Agilent GTA-96/97/100/110/120 graphite furnace AA systems. Application: For GTA 96/97/100/110/120, Graphite Furnace AAS, GFAA…
-
Concentric nebulizer for MP-AES
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Screw Locking M8, bead adjuster, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tube plastic, 3/32 x 7/32 in., 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Rinse Bottle
Agilent TechnologiesThe Agilent Technologies 1000 mL rinse bottle is suitable for use with 97/100/120 PSD (programmable sample dispenser) models. Application: For PSD-97/100/120 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Screw Bead Adjuster, Grey PEEK, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Graphite Electrodes
Agilent TechnologiesAgilent graphite furnace AAS electrodes provide good electrical contact, ensuring you achieve optimum performance with maximum tube life. Application: For GTA 96/100/110 Zeeman This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
N Adapter
Agilent TechnologiesThe Agilent Technologies 6.4 mm N adapter consists of an external thread that provides good connection and ensures a leak-tight seal. Application: For FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer This product is only available to U.S. Domestic Customers. For research use only,…
-
IIIB T-Piece
Agilent TechnologiesThe Agilent Technologies IIIB T-piece comes with a nipple for a leak-proof connection and provides a secure connection to 3.5 to 4.5 mm tubes. Application: For 3.5 to 4.5 mm ID Tubes, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only available to U.S. Domestic Customers. …
-
O-Ring/Gasket Kit
Agilent TechnologiesThe Agilent Technologies O-ring/gasket kit is suitable for use with Mark VI universal spray chamber models. Application: For Mark VI Universal Spray Chamber Used With Organic Solvents This product is only available to U.S. Domestic Customers. For research use only, not to be used in…
-
Peristaltic Pump Tubing
Agilent TechnologiesAgilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …
-
Nebulizer Cleaning Wire
Agilent TechnologiesThe Agilent Technologies nebulizer cleaning wire is suitable for use in Mark V, VI and 7 spray chambers. Application: For Mark V, VI & 7 Spray Chambers This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Capillary Tubing
Agilent TechnologiesThe Agilent Technologies capillary tubing measuring 0.023 Inch x 10 Feet provides a secure connection for 0.038 Inch Dia tubes. Polyethylene construction provides added strength and durability and is designed to use with cross-flow and high solids nebulizers. Application: For Sample Tubing,…
-
Peristaltic Pump Tubing
Agilent TechnologiesAgilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …