Santoprene peristaltic pump tubing, yellow/yellow, 15/pk. Suitable for ketone-based solvents including MIBK and DIBK. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Barrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

This peristaltic pump tubing is recommended for use with the Agilent fully automated modular VGA 77 vapor generation accessory, which. is used with Agilent flame AA systems to enable rapid trace level determinations of mercury (using the proven cold vapor technique) and other hydride-forming…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…

Agilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For End…

Agilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: For…

Compatible with Agilent 50/55/110/200/240/280 flame AA. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies tube split ring kit is suitable for use with SPS-3 model. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Torch, easy-fit, for Agilent 4200 MP-AES only (not compatible with earlier model 4100-MP-AES), blue base for easy identification. Features a 1.2mm ID injector with a ball joint base for easy connection to the spray chamber (the standard torch). This product is only available to U.S. Domestic…

Barrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…

These graphite furnace tools are required to enable removal and replacement of the graphite electrodes or the graphite shroud. These tools are suitable for use with the Agilent GTA-96/97/100/110/120 graphite furnace AA systems. Application: For GTA 96/97/100/110/120, Graphite Furnace AAS, GFAA…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…

The Agilent Technologies nebulizer cleaning wire is suitable for use in Mark V, VI and 7 spray chambers. Application: For Mark V, VI & 7 Spray Chambers This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies flame AA sampling probe assembly has a sturdy stainless steel construction for more strength and the PTFE lining delivers optimum results. Application: For AS-90/90A/90plus/91/93plus/S10 Autosamplers, PerkinElmer Autosamplers This product is only available to U.S.…

The Agilent Technologies atomic absorption miscellaneous varian AA certification kit is suitable for use with spectrometry systems. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Spray chamber tools enable the user to complete routine maintenance on the Mark 7 spray chamber. Maintenance is easy. Special spray chamber tools are required, to remove the nebulizer components which are integrated into the nebulizer block. This product is only available to U.S. Domestic…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: Tubing & Drain Interlock, Drain Bottle not included, For AAnalyst 700/800 This…

A range of rinse reservoirs and other autosampler supplies are available to upgrade probe rinsing capacity, giving you flexibility to improve the capabilities of the autosamplers used in your lab. Application: For SPS 3 Autosampler, Secures Transfer Tubing From Probe to Instrument on Arm of Probe…

The Agilent Technologies 1 ABS AA certified filter is suitable for use with chromatography or spectrometry system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies 0.7 mm capillary nipple E consists of an internal thread that provides a secure connection to any adapter or connector. Application: For FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer This product is only available to U.S. Domestic Customers. For research…

Agilent mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems are equivalent to genuine mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems. With these supplies you can be confident that it will integrate…

A separate hydride module should be used exclusively for Hg determinations to reduce cross contamination. Application: For VGA 77 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies complete cell and window is compatible to use with cells and Hg lamps in any PerkinElmer instruments. Application: For FIMS-100/400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies front and back contact cylinder O-ring is suitable for PerkinElmer instruments. Application: For PerkinElmer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

A number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…