Hardware

Compare Tool

Select up to 3 products

Sort
View
Show
  • The V-21 Wear Metal Standards from PerkinElmer are ideally suited for the analysis of metal additives, wear metals and contaminants in engine oils by ICP-MS.

  • Nut-Optima 4X00 Injector Adapter

  • V-Solv ™ ICP Solvent 5 gallon is a proprietary solvent that is used for diluting oil and other organic liquids for analysis by ICP and ICP-MS. Use V-Solv ™ as a matrix blank and as a diluent for your calibration standards and samples for outstanding nebulization characteristics. V-Solv ™ ICP…

  • Tubing Cutter

    Agilent Technologies

    Tubing cutter, for plastic or PEEK tubing.

  • Alumina, 0.80 mm i.d.

    PerkinElmer

    Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e. g. , xylene.

  • Quartz, 1.2 mm i.d.

    PerkinElmer

    This injector is for aqueous applications. It is a tapered injector. The ID is 6mm and at the tip of the injector, it tapers to 1. 2.

  • The rotor seal is the polymeric disc that makes a high pressure seal against the stator. The seal wears with use and is one of theonly parts that may need routine replacement. Stators need replacement only if the ports become damaged. Vespel blend rotor seals have an operating pH range from 0 to…

  • Fast acting, 1/4 turn shutoff Simple, compact design Design consists of body, plug assembly and handle. Plug and O-ring seals are TFE coated to provide lubrication between plug assembly and the body bore. Valve features very low torque operation. Intermediate valve positions allow forward…

  • HF-resistant. Use with standard torch.

  • Attain reliable vacuum sealing, even after repeatedly disconnecting and reconnecting Ultra-Torr straights and tees for vacuum sealing.

  • Sealed Water Sample

    PerkinElmer

    For checking instrument sensitivity, a 10 mm sealed cell contains high-purity water, which acts as a constant sample to reproducibly measure signal-to-noise using the Raman band.

  • Platinum injector, bayonet mount, For low-ppt Al determinations. Platinum injectors are used for introducing volatile organic solvents and HF-containing semiconductor-grade chemicals.

  • Connect fractional tubing sections. 2713C02 to C16 are brass 2713C21 to C27 are stainless steel

  • Our go-to multi-element standards are suitable for your daily laboratory needs. Spanning across a wide range of applications and methods, you’ll nd the right solution to help you achieve laboratory success.

  • Multi-element Calibration Standard 3, Matrix per Volume: 5% HNO3 per 125 mL, Concentration of Element: 10µg/mL Silver 10µg/mL Aluminium 10µg/mL Arsenic 10µg/mL Barium 10µg/mL Beryllium 10µg/mL Bismuth 10µg/mL Calcium 10µg/mL Cadmium 10µg/mL Cobalt 10µg/mL Chromium 10µg/mL Cesium …

  • Can be used with AmAmalgamation System.

  • Mixed Calibration Standard 2% HNO3, 500 mL (N0691579) 50 µg/mL: As, K 10 µg/mL: La, Li, Mn, Ni, Sr, Zn 1 µg/mL: Ba, Mg 2% HNO3, 125 mL (N0773120) In ASTM ® Type I Water 5% HNO3, 125 mL (N9300221) 100 µg/mL: As, Tl 50 µg/mL: Cd, Pb, Se Vis Wavecal…

  • A removal tool is required to handle and replace the contact cylinder in atomic absorption instruments that use THGA furnaces.

  • Matrix: Hydrocarbons Size: 500 mL

  • Quartz Injectors are designed for organic solvents and non-HF matrices.

  • HF mixing T-piece

    PerkinElmer

    Replacement mixing chamber/combiner for HF-resistant internal standard kit.

  • We offer a wide selection of Standards for ICP-OES and other applications, including the Antimony (Sb) Metallo-Organic Standard.

  • VHP Fittings

    Agilent Technologies

    Agilent's 1200 bar removable fitting (for 1/16 in od capillaries) consists of a stainless steel screw, an internal stainless steel ferrule and a front ferrule in PEEK. The fitting can be used throughout the flow path, but because it can be re-used without losing tightness, it is especially…

  • PMMA-Cuvette Semi-micro 1000 p

  • Each standard is supplied with a comprehensive Certificate of Analysis that documents its quality and reliability. Each standard: Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities…

  • Body Material: 316 Stainless Steel

  • Each standard is supplied with a comprehensive Certificate of Analysis that documents its quality and reliability. Each standard: Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities…

  • Stainless steel 10-32 thread fittings use a non-swaging Kel-F™ or PEEK™ replaceable ferrule Inert contact surfaces make them biocompatible Ideal for applications where corrosive solvents are being used Hexnut with Kel-F™ or PEEK™ ferrules are recommended for use…

  • Includes four O-Rings for injector support/ torch base.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.