Note: New ferrules are required when trap is changed.

1/16in Swagelok Nut, Pkg 5

Universal Column Connector, Pkg 5

Of the three ferrule types available graphite is the softest, making it less damaging to capillary columns when overtightened. Graphite seals easily and does not stick to glass columns. Recommended for use with capillary columns. Temperature limit is 450 °C. Note: 0.25-0.32mm inner diameter.…

Description - Quantity 1/8"""" Tubing x 50 foot coil Copper Special Cleaning- 1 1/8"""" Compression Brass Tee Two Piece Ferrule Brass- 3 Tee 1/8"""" Com x 1/8"""" Comp x 1/4"""" fnpt Brass- 3 Adjustable Safety Relief Valve Brass 50 - 150 PSI- 3 1/4"""" fnpt x 1/8"""" Comp Fitting Brass- 3 1/8""""…

Note: 0.25-0.32mm inner diameter. columns require 0.5mm inner diameter ferrules. 0.53mm inner diameter columns require 0.8mm inner diameter ferrules.

The PerkinElmer auto-ignite jet assembly comes with a FID detector and the auto-ignite mechanism of the jet makes it easy to use.

Sorbent:Chromasorb 106 The Chromosorb 106 is conditional at 240 °C. PerkinElmerre commends a maximum temperature of 250 °C for this sample tube with a desorption temperature of 220 °C. The tubes approximate analyte volatility range is n-C7 to n-C30 and the typical analytes for the Chromosorb 106…

The PerkinElmer detector receiver with a 1/8 Inch fitting comes with a PID detector and is compatible wit AutoSystems.

The PerkinElmer injector adapter has a stainless steel construction with a gold-plated coating that offers more strength and corrosion resistance.

Complete Capillary Injector Add-On Kit for PerkinElmer Autosystem Series, 120V

The PerkinElmer UHP-ZA zero air generators produce a continuous stream of organic impurity free air from an external dry compressed air source and offer superior limits of detection over and above other modes of supply. Flow rates range from 1 L/min to 30 L/min.

Includes Glass Wool (P/N 54120790), Tenax TA 60-80 Mesh - 15g (P/N 04978064), Packing Gauze - Pkg.100 (P/N L4071034), Retaining Spring - Pkg.50 (P/N L4071123), Stainless Steel Sample Tubes - Pkg.10 (P/N M0413595), Glass Sample Tube - Pkg.10 (P/N M0413598), Five Large PTFE Filter Discs (P/N…

The Merlin MicroSeal injection port septa is the perfect substitute to use in split/split less injection and SPME. It has the capacity to hold more than 2000 syringes depending upon the type of the syringe. Instrument downtime for septa changes and port liner changes is greatly minimized. It offers…

Graphite/vespel ferrules (15% graphite/85% polyimide) are recommended for use with GC/MS systems. Best choice for glass columns and polyimide-coated, fused silica capillary columns. Can usually be removed easily from column. Temperature limit is 350C. Note: 0. 25-0. 32mm inner diameter. columns…

All your consumable needs in one convenient kit, designed specifically for Industrial Hygiene using Thermal Desorption. Required for use on the TurboMatrix instrument during analysis (use with brass long-term storage caps).

Graphite O-Rings for Glass Liners, Pkg 5

Splitless Liner 2mm; 2mm I.D x 5.0mm O.D x 100mm length

The KALREZ® injector liner O-ring is helpful for sealing the inlets with O-rings and graphite seals. This O-ring helps in the efficient sealing of the inlet liner between the inlet weldment and the turn-top.

The PerkinElmer end cap O-ring is compatible to use with the end caps of seal plugs that consists of impact beads. This O-ring is one of the components that comes inside the burner gasket kit.

Ideal for general purpose applications Quartz Wool is used to fully vaporize the sample Color coded ORANGE on the liner with PKI name

The PerkinElmer window liner is designed to use with FPD detector in the gas chromatography technology.

This kit includes: 20 mm Hand Crimper (1), 20 mL Clear Glass Crimp Top Vials (500), PTFE/Butyl (red) Septa with Pre-Assembled Aluminum Crimp Caps (100), PTFE/Silicone (white) Septa with Pre-Assembled Aluminum Crimp Caps (100), Aluminum/Silicone Septa with Pre-Assembled Aluminum Crimp Caps (100), 20…

Sorbent: Tenax TA

We offer standard solutions to meet your environmental analysis requirements.

Sorbent: Soil Vapor Intrusion Our new multi-bed construction extends the hydrocarbon range past naphthalene while retaining the lighter components, enabling larger sample volumes, hence, enhancing detection limits. Unique design that meets the challenges and criteria of the EPA regulations for air…

Low flow trap (P/N L4275107) packed with carbonaceous sorbents suitable for ozone precursor and air toxics monitoring.

The PerkinElmer NPD bead assembly utilizes of gas chromatography technology and is mainly used in laboratory and manufacturing factories.

Application - Universal liner for general purpose analyses, intermediate polarity. Wipes the sample from the tip of the needle for complete transfer Gives accurate and reproducible results Performs well in splitless mode Promotes vaporization of sample Minimizes mass discrimination Prevents…

The PerkinElmer fine tip detector probe is an important component of portable electronic gas leak detector and helps in trace analysis.

NOZZLE ASSY-ASXL FID

Note: These connectors are not recommended for use with the aluminum-clad columns.