Manufactured from type 1 class A borosilicate glass Receiving vessel is placed under bell to maintain sterility during filling

Manufactured from 304 Stainless Steel, United Scientific REUZ™ (“re-use”) Beakers with Handles feature graduations stamped into the inside wall for easy reading of volumes in milliliters or ounces. Include a pouring spout and large, comfortable stainless steel handle. The corrosion-resistant…

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

Pressure equalizing addition funnel, with Graduations, and a glass T-Bore stopcock in the equalizing arm permitting the purging and isolation of the funnel contents for storage. Both top outer and lower inner joints are the same size. Lower stopcock is a glass straight bore stopcock. Both stopcocks…

Sterile, disposable, 250 ml plastic funnels specifically designed for microbiological testing of pharmaceuticals, food, beverages, water and other liquids. Used in combination with a gridded membrane filter and vacuum manifold system such as the Combisart.

A high quality laboratory grade porcelain, made with uniform wall thickness and dense materials which provides stable mechanical strength and little permeability. When properly used, the glazed pieces can withstand temperatures of 1050 degrees centigrade and the unglazed pieces can withstand…

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

These economical disposable funnels are available in either transparent polystyrene or translucent polypropylene. They are lightweight, have reinforced rims and inside fluting. They are tapered at a 60° angle. Available in 55mm and 65mm widths Available in Polystyrene (PS) and…

Large plastic funnels made of polyethylene. Big plastic funnels are designed for transferring liquids. Maximum temperature for HDPE is 110°C.

For aseptic filling of vessels Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

Design of funnel permits addition of solvents to flash chromatography columns without disturbing the silica-gel / packing layer. Lower end of the funnel is closed and the stem has a series of small holes through which the solvent drains. Top of the funnel is 75mm (3in) in diameter with the stem…

Make additions to burettes and narrow neck containers easily with this flared top thistle tube. Polypropylene plastic; chemical resistant, unbreakable, safe Steam autoclavable at 121°C (250°F) Dimensions: 27mm (1-1/16") I.D. top with a 41mm (1-5/8") O.D. flare …

Large funnels are ideal for filling drums, barrels, tanks and carboys providing ample volume and fast flow. The two smaller sizes have a handle at the rim for added stability. Molded of natural polypropylene plastic Steam autoclavable at 121°C (250°F)

Foxx Life Sciences EZwaste® 4" Safety Funnel features a latching lid with gasket to create an air-tight seal and to keep VOCs from evaporating into the air. The EZwaste® Safety Funnel is the ultimate lab safety product for liquid waste collection. Our safety funnels can be used as both a sealed…

Our Utility Funnels are made from tough, chemically-resistant polypropylene. They have a 60º cone angle and ribs to prevent air-lock. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.

The Simport CytoSep™ Funnel Chambers for the Hettich Cyto-System optimize lab throughput with multiple funnel options in 2, 3, or 4 funnels per slide. These funnels are perfect for every application such as CSF, Viral infections, Bronchial secretions and come in four sizes from 1 ml to 8 ml.…

With two chambers, cell deposit areas are close together and easy to find, helping to speed sample analysis. Two deposit areas on one slide enhance all of the advantages of the popular single chambers. Reduced time spent loading and unloading slides. Two cell deposit areas on the same slide…

Funnel, 100 ml Funnel, 300ml

Manufactured from type 1 class A borosilicate glass Receiving vessel is placed under bell to maintain sterility during filling

For use in the Disinfectant Testing Procedure as described in the AOAC manual Cylinder ends are lightly glazed

The polypropylene Buchner funnels are two-piece, light-weight, and easy-to-clean. They are fully autoclavable. The top portion snaps to the bottom forming a vacuum tight seal. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for…

Molded construction with bottom ground flat; for use in the sugar industries

Manufactured from type 1 class A borosilicate glass Receiving vessel is placed under bell to maintain sterility during filling

Durable polypropylene funnels are translucent and allow safe and easy transfers of solids or liquids from one vessel to another.

Reduces difficulties in handling narrow dialysis bags. Dialysis tubing is cut to length and knotted at the end. The other end is slipped onto the tube and held with Silicone Rubber Loops, or a rubber band. Three tube steps fit various sizes of dialysis tubing Triple notched universal…

KIMAX funnel constructed with heavy uniform walls and strong, fire polished rims and stems to give a long service life. Funnels have a high resistance to chemical attack, mechanical, and thermal shock. Designed from ASTM Specification E1095, Type I, Class B requirements.

Made of either polystyrene or polypropylene Both are tapered at a 60° angle with inside fluting.

Manufactured from type 1 class A borosilicate glass Receiving vessel is placed under bell to maintain sterility during filling

Available in three sizes, these funnels have eight internal ribs to facilitate filtration. They are made of polypropylene. Funnel Assortment These funnels have eight internal ribs to facilitate filtration. They are made of polypropylene and includes one each of the 35mm, 52mm, and 65mm funnels.

Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…

Externally ribbed, polypropylene funnels. Steam autoclavable at 121°C (250°F) Useful for a variety of lab applications

ValueWare® borosilicate glass 58° long stem addition funnel with heavy uniform walls and strong, molded rims Long stems are fire polished for long service life High resistance to chemical attack, mechanical, and thermal shock Designed from ASTM specification E1095, Type I, Class B requirements