Chemglass Lab Flasks
-
FLASKS, FERNBACH, 2800ML, WITH 6 BAFFLES, 2800mL flask with 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to help oxygen transfer to the culture medium. FLASKS, SHAKE, NO BAFFLES, DELONG NECK, WITH STAINLESS STEEL CLOSURES, Non-baffled flasks…
-
Round bottom single neck flask having a standard taper outer joint with a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from flask while a purge of inert gas is maintained thru the sidearm. Valve size is as listed.
-
Flasks, Heavy Wall, Pear-Shaped, 2-Necks
ChemglassPear shape, HEAVY WALL 2-neck flask with standard taper outer joints. Flasks with a 10/18 outer joint on the side neck are used with either jointed thermometers or CG-1079 inlet adapters.
-
Unbreakable Dewar flask is made entirely of Stainless Steel. Dewar flask has many flexible laboratory applications including cooling of small samples and as an insulating flask. Furthermore, it can be used for storage & transport of liquid nitrogen LN2, dry ice CO2, and…
-
Heavy Wall blanks are 30% heavier than our standard CG-618 series. Blanks are used in the fabrication of single or multi-neck round bottom flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. Flask has two hooks 180°; apart for use with CG-110 stainless steel springs.
-
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle. The 3L version does not have a dimple. The complete system includes a flask with two angled sidearms…
-
Spinner Flask
ChemglassWater jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass. Flasks are typically used with a circulating water bath. Jacket volumes are approximate and flasks are not graduated. Note: Paddle and Cap assembly are…
-
Flasks, Dewar, Low Form, Foam
ChemglassFeatures: Increased SAFETY- Unbreakable Lightweight Design Each Dewar is Supplied with a Lid Patented Closed Cell Foam Construction (USPTO # 7,971,744) Lower Boil Off and Consumption of Liquid Nitrogen Patented foam dewars provide a safe and durable vessel for handling…
-
Flasks, Quartz, Flat Bottom, Single Neck
ChemglassSingle neck, flat bottom, quartz flask with standard taper outer joint.
-
Round bottom, HEAVY WALL single long neck flask with a standard taper outer joint.
-
Round bottom, HEAVY WALL flask with a standard taper outer joint and a side well to accept a thermometer. Top of thermowell is tooled to accept a #0 rubber stopper.
-
Replacement Parts For Internal Impeller Assembly Bioprocess Spinner Flasks
-
Flasks are manufactured to conform to Federal Specifications NNN-F-289 for Type 1, Class" A" unserialized flasks and ASTM E-288. Supplied complete with one closed bottom polyethylene stopper. For additional stoppers, see CG-8740. NOTE: THE CG-1602-20 CONFORMS TO ISO 1042, DIN 12664…
-
Flasks, Tapered, European Style, 3-Necks
ChemglassEuropean style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. With standard taper outer joints on center and side necks.
-
Glassblowers Flask Blanks, Erlenmeyer
ChemglassBlanks for fabrication of Erlenmeyer shaped flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center and side necks. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid.
-
Lower half of flask has a jacket permitting heating or cooling of the contents with fluid from a constant temperature bath. The unique design of the Chem-Drain valve incorporates a PTFE plunger that allows the contents of the flask to drain directly through the bore of the plunger. When closed,…
-
Flasks, Erlenmeyer, GL Threads
ChemglassFlask has a GL screw thread top and is supplied complete with a polypropylene liner less closure and pouring ring. Graduated to approximate volumes.
-
Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker.
-
Unbreakable Dewar flask is made entirely of Stainless Steel. Dewar flask has many flexible laboratory applications including cooling of small samples and as an insulating flask. Furthermore, it can be used for storage and transport of liquid nitrogen LN2, dry ice CO2, and…
-
Round bottom, HEAVY WALL flask with standard taper outer joint. Side tubulation accepts a CG-1040 rubber fitment for insertion of thermometers or bleed tubes. Supplied complete with one CG-1040 rubber fitting.
-
Heavy Wall Blank Filter Flasks
ChemglassExtra heavy, unmarked blanks for fabrication of filter apparatus. Top has a tooled finish to accept a rubber stopper or neoprene filter adapter.
-
Heavy wall, wide mouth flask with a GL80 glass thread and a 24/40 connecting adapter. Flasks have a heavy wall for vacuum applications and are balanced to prevent run-out during rotation. Unique design makes it easier to handle highly viscous liquids, powders, and solids. The large opening permits…
-
Internal Large Impeller Spinner Flasks
ChemglassMicroCarrier spinner flasks with larger paddle design promotes increased optimal growth of suspension and microcarrier cultures. Indented bottom (100mL thru 1000mL) promotes mixing action under the impeller paddle. The 3L version does not have a dimple. The complete system includes a flask with two…
-
Round bottom, HEAVY WALL two neck flask with standard taper outer joints on both the center neck and angled side neck. Flasks with 10/30 side neck are for use with CG-3506 thermometers. The 29/26 center neck flasks have a groove tooled just below the grind to aid in clamping of the flask.
-
2800mL flask with 3 baffles on the lower outside edge of the flask to help oxygen transfer to the culture medium.
-
Flasks, Heavy Wall, Pear-Shaped, 3-Necks
ChemglassPear shape, HEAVY WALL 3-neck flask with standard taper outer joints on the center and 20º angled side necks.
-
2800mL flask with 3 baffles on the bottom surface of the flask to help oxygen transfer to the culture medium.
-
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass, and a microcarrier style impeller with glass shaft that extends through the cap and PTFE paddle. Flasks are typically used with a circulating water bath.…
-
Manufactured from borosilicate glass these wine testing volumetric flasks have wide bases and a flat bottoms for stability. Flask neck is graduated in 1mL subdivisions from 680 to 780mL. The long neck is calibrated To Contain at 20°C and markings indicate the volume of liquid when filled to…
-
Fernbach 2800mL 3 Side Baffles Flasks
ChemglassFlasks are designed for culturing organisms that require a large surface area to volume ratio. Flask has 3 baffles on lower outside edge to help oxygen transfer to the culture medium. Available with a plain 59mm ID neck, 38mm OD Delong style neck or GL-45 screw neck supplied with a vented cap.