Bellco Glass Lab Flasks
-
250mL Erlenmeyer Flasks, Vent
Bellco GlassDesigned for mammalian suspension culture applications as well as bacterial & yeast culture. Vent caps feature 0.22µm hydrophobic membrane which allows for gas exchange without contamination; over-sized vent area in cap improves gas exchange. Specifications: Packaged sterile in…
-
45mm Erlenmeyer Flask, 500mL Graduated w/ Screw Cap
Bellco GlassManufactured from Type 1, Class A, Borosilicate and ideal for all culture and media preparation/storage purposes Supplied with GL45 blue polypropylene linerless screw caps and pouring rings and graduated to approximate volumes
-
Individually calibrated to deliver at 20C. Durable ring marks resilient wear. Certified Class B with individual ring marking per DIN 122664. Supplied with screw cap. Specifications: Volume: 250ml Accuracy +/- Ml: 0.24 Height: 235mm Thread: 25 Case Quantity: 5
-
Trypsinizing Flasks,125mL
Bellco GlassDesigned with deep side baffles for optimal agitation. Promotes enzyme digestion of tissue fragments and homogenates into cell suspension. Includes rubber lined black phenolic screw caps. Integral dam contains non-trypsinized tissue during decanting. Specifications: Type 1 Class A…
-
IOB w/ Water Jacketed Flask 100mL
Bellco GlassInternal impeller is useful because it decreases risk of contamination. Has an adjustable shaft to align the paddle. Large paddle promotes increased oxygenation. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. The sealed internal assembly requires less incubator…
-
DeLong Flask Comp,125mL
Bellco GlassDeLong culture flask Ideal for growing, storing and mixing of aerobic and anerobic cultures Borosilicate glass Type 1, Class A Graduated to approximate volumes
-
Bio-Probe Spinner Flask Only 500mL
Bellco GlassIdeal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 500ml Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 110 x 175mm
-
Adjustable spinner height. Ptfe impeller assembly rides on glass bearings for friction free operation. 25ml & 50ml have black phenolic rubber lined caps. 100ml-300ml have polypropylene caps, silicone gasket and pouring rings.
-
Erlenmeyer flask, graduated Ideal for general laboratory media mixing, storage and dispensing Narrow mouth with break-resistant lip that resists chipping Graduated to approximate volumes Borosilicate glass
-
IOB w/ Micro-Carrier Flask 6L
Bellco GlassInternal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 6l Dimensions: 205 x 410mm Sidearm cap: 45mm
-
Volumetric Flasks,250mL To Contain
Bellco GlassManufactured from Type 1 Class A Borosilicate Glass. Ideal for use to prepare solutions, and to contain. Flat bottom bulb with a elongated neck with permanent graduation line and marking area. Volumetric flasks are calibrated for a particular temperature usually 20 degree Celsius. Specifications:…
-
Graduated Erlenmeyer Flask, 2000mL With 38mm Cap
Bellco GlassManufactured from Type 1, Class A, Borosilicate glass and ideal for media storage and mixing Long-skirted screw cap protects flask contents from contamination
-
Water Jacketed Flask Complete 3L
Bellco GlassFor use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 1300ml Cap size: 100mm Sidearm cap size (mm): 45mm
-
Individually calibrated to deliver at 20C. Durable ring marks resilient wear. Supplied with standard ground polypropylene stopper. Certified Class B tolerance per DIN ISO 1042 Specifications: Volume: 100ml Accuracy +/- Ml: 0.16 Height: 180mm Stopper Size: 14/23 Case Quantity: 6
-
Adjustable spinner height. Ptfe impeller assembly rides on glass bearings for friction free operation. 25ml & 50ml have black phenolic rubber lined caps. 100ml-300ml have polypropylene caps, silicone gasket and pouring rings. Flask has flat bottom (no dimple) Center (mm):100 Sidearm (mm):45 Od x…
-
Bell-Flo Flask Complete L32 250mL
Bellco GlassManufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 32mm Center cap: 70mm Flask size: 250ml
-
Bell-Flo Flask Complete 100mL
Bellco GlassManufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Bottom indents & three vertical baffles for optimal mixing 32mm or 45mm sidearms for port assemblies Rugged stainless steel/ptfe internal bearing assemblies Center cap:70mm Sidearm cap:32mm…
-
125mL Erlenmeyer Flasks, Vent
Bellco GlassDesigned for mammalian suspension culture applications as well as bacterial & yeast culture. Vent caps feature 0.22µm hydrophobic membrane which allows for gas exchange without contamination; over-sized vent area in cap improves gas exchange. Specifications: Packaged sterile in…
-
DeLong Neck Erlenmeyer Flask Only,2L
Bellco GlassDeLong culture flask without closure Stainless steel or kap-uts disposable closures purchased seperately Borosilicate glass Type 1, Class A Graduated to approximate volumes
-
Flasks Cap, Plug Seal
Bellco GlassReplacement caps available for Tissue Culture Flasks. Vent caps feature 0.22µm hydrophobic membrane. Specifications: Cap Style: Plug Seal Flask Size: Fits 25cm and 50mL Case Quantity: 5
-
Media Storage & Dispensing Flask, Graduated, 250mL
Bellco GlassMedia Storage & Dispensing Flask with bottom hose connection is graduated for approximate volumes & the heavy duty break resistant neck provides an excellent fit for rubber stoppers. All flasks are manufactured from Type 1 Class A Borosilicate
-
Trypsinizing Flasks,125mL
Bellco GlassManufactured from Type 1 Class A Borosilicate Glass. Designed with deep side baffles for optimal agitation. Large bottom surface for easy access with Bellco large orifice pipette. Specifications: Type 1 Class A Borosilicate Glass Size: 125ml Break Resistant Lip Dimensions: 66 X…
-
PP Erln Grad Flasks,50mL
Bellco GlassFlask have wide-mouth design for easy pouring and printed scale of approximate volumes. Specifications: Material: Polypropylene Includes: Polypropylene Screw Cap Size: 50ml - 1l Case Quantity: 6
-
Bio-Probe Spinner Flask Only 1L
Bellco GlassIdeal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 1l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 135 x 240mm
-
Adjustable spinner height. Ptfe impeller assembly rides on glass bearings for friction free operation. 25ml & 50ml have black phenolic rubber lined caps. 100ml-300ml have polypropylene caps, silicone gasket and pouring rings. Size: 25ml Dimensions: 38mm ox 120mm tall Center neck: 38mm Sidearms: 18mm
-
DeLong Neck Erlenmeyer Flask Only,125mL
Bellco GlassDeLong culture flask Borosilicate glass Type 1, Class A Graduated to approximate volumes