Flasks, Ace Glass, Supplies
-
Flask Reaction, Hi-Vac Valve NO-AIR
Ace GlassRound bottom borosilicate glass flask with standard taper center neck and a 0-4 Hi-Vac valve for precise control. Flask is ideal for simple NO-AIR and vacuum applications. Outlet arm is 8MM and can be fitted with a rubber septa for insertion of samples or additives via syringe.
-
Media storage flask with 1/2" bottom hose connection. Ideal for use with aseptic filling bells (Ace code 3868) for transferring medias to various other flasks and vessels. Beaded rim neck takes standard cotton plugs or stoppers.
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and two angled standard taper reinforced outer side necks.…
-
Gasket, Reaction Flask
Ace GlassFlat gaskets for sealing two flat ground glass surfaces. Plain flat or grooved PTFE gaskets reduce breakage and make an effective seal. Our flat, exclusive FETFE gasket provides a leak-free seal with slight clamp pressure. These are designed especially for use with our conical or flat ground flange…
-
Distillation Apparatus, Cyanide
Ace GlassApparatus for converting simple and most complex cyanides into HCN and for from most interferences before measuring by titration or colorimetric analysis examination of industrial wastes and other water. Method is described in Standard the Examination of Water and Wastewater. Fourteenth Edition,…
-
Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.
-
Flask, Two Necks, Angled
Ace GlassRound bottom with outer joints and side neck angled. Available fabricated with heavy walls, approximately 30% heavier than regular wall flasks.,/p>
-
Flask, Erlenmeyer, Stopper Top
Ace GlassErlenmeyer flask with included stopper top. No graduations.
-
Kuderna-Danish Evaporative Concentrator
Ace GlassFor concentration of materials in volatile solvents. Combines rapidity, simplicity and quantitative efficiency including minimization of entrainment escape and transfer losses. Available in 250ml, 500ml, 1L flasks, with a 19/22 inner joint on bottom of flask, 24/40 on top. Choice of Snyder or…
-
Congealing Termperature Apparatus
Ace GlassSimilar to Congealing Temperature apparatus described in U.S.Pharmacopeia, 1995, pages 1780, except this apparatus is supplied with Ace-Threds in place of rubber stoppers, where practical. #50 thread at center holds a test tube with a #25 bushing, open top test tube utilizes a rubber stopper to…
-
Adapter Connecting, Side Outlet, NO-AIR
Ace GlassUsed for converting a single neck round bottom flask to air-free or vacuum applications. Outlet can be either 2mm glass stopcock or a 0-3 inlet valve. Upper and lower joint sizes are the same size. Great for adapting flasks and other components for Schlenk lines.
-
Instatherm Reaction Flask
Ace GlassThis integral heating element eliminates the local super heating com- monly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. The response is raoid and accurate the attention can be directed to contents instead of the pot. supplied with cord. Flask…
-
Rugged cylindrical reaction flask Duran, flat, ground flange and O-ring groove, with an Easy Action Plug bottom outlet with Chemraz O-Rings for draining contents. For use with 6517 quick release clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone…
-
With 24/40 standard taper joint at top and side hose connection.
-
47mm Membrane Filtration Apparatus
Ace GlassBorosilicate glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy…
-
Nephelo Flask, Baffled, Long, Plain Neck
Ace GlassTriple baffled, Nephelometer, culture flask with three outside bottom baffles. Side cuvette arm fits standard Nephelometers and specrophotometers. The side baffles promote better mixing and oxygen transfer. The 25mm long style neck accomodates either plastic or stainless steel closures, see Ace…
-
Flask, Flat Bottom, Three Neck
Ace GlassFlat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.
-
Heavy wall cylindrical reaction flask with Duran grooved flange opening. Flask has Zero Dead Space, (ZDS), bottom valve. The valve features no material hang-up in the fully open position. When closed, the valve seats flush with the bottom of the flask. Includes one CAPFE o-ring. See Ace 6517 for…
-
Shake style culture flask with long style straight neck, accomodates either plastic or stainless steel closures. Without baffles.
-
Flask, Round Bottom, Ace-Thred Side Port
Ace GlassRound bottom, single neck flask with Ace-Thred side port supplied with our 5029-10 nylon bushing and 7855-704 FETFE o-ring. Bushing is ideal for use with thermometers or bleed tubes of up to 7mm OD. Available in standard and heavy wall versions.
-
Flask, Rotary Evaporator/Freeze Drying
Ace GlassDual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head
-
Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and angled standard taper reinforced outer side neck.…
-
With three necks and PTFE plug (5mm bore on 5000mL, 4mm bore on all other sizes) stopcock outlet. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. For stopcock plugs, see 8224. For heating mantle, see 12039
-
Borosilicate glass, round bottom reaction vessel. Supplied with 24/40 center neck and two 24/40 side necks. Fourth neck is #25 Ace-Thred on 500 mL for use with 7506-10 Bushing and O-Ring; #36 Ace-Thred on 1000 mL and 2000 mL sizes for use with 7506-12 Bushing and O-Ring to make a leak-tight…
-
Flask, Round Bottom, Beaded Tube Port
Ace GlassRound bottom, single neck flask with a beaded tube end port.
-
Head, Duran Flange
Ace GlassProduct family consisting of large spherical flasks and the heads that complement them. Flasks that feature a bottom outlet have descriptions that state the outlet's type, otherwise the flask has no outlet.
-
Instatherm, Erlenmeyer Flask
Ace GlassInstatherm coated, erlenmeyer flask delivers rapid heating up to 250°C. Always use with a temperature controller and never run dry.
-
Flask, Two Neck, Angled Side Neck
Ace GlassTwo neck, one center and one angled side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
Jacketed, spherical reaction flask with Duran flat flange and o-ring groove, for use with our 6517 Quick Release clamp. Bottom outlet features an Easy-Action plug controlling the 28/15 o-ring ball joint outlet. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints…
-
Round bottom flask with five necks arranged 3 in-line, two 90 degrees front and back of in-line necks. All necks are vertical. Available in heavy wall.