Flasks, Ace Glass, Supplies
-
Media storage flask with 1/2" bottom hose connection. Ideal for use with aseptic filling bells (Ace code 3868) for transferring medias to various other flasks and vessels. Beaded rim neck takes standard cotton plugs or stoppers.
-
Bench scale, 1000 - 6000mL, Clean-In-Place sprayer for use with either pressurized or vacuum assisted flask washing. All PTFE construction. Four, 3 inch sections with available extenders allow flexibility. Ace recommends that the sprayer ball be positi
-
Flask, Round bottom, Three Neck
Ace GlassRound bottom, three neck flask. Side necks are angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance. Microscale flasks, codes -34 & -36, feature 14/10, 20-400 externally threaded cap-seal joints supplied with 14.7-15mm holed caps, PTFE faced…
-
Fernbach style culture flask with 38mm long style straight neck to accomodate plastic or stainless steel closures, see Ace 3917 & 3918 product families. Flat bottom, no baffles. Caution! Do not place on direct heat source.
-
Round bottom, single neck flask with stopcock septum port side arm for use with air-sensitive material. Features a PTFE, 2mm bore stopcock. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.
-
Flask, Rotary Evaporator, Large
Ace GlassRotary evaporation flasks available plain, poly-coated or ambered. Poly-coating has a maximum temperature of 100 degrees C and can withstand acid and solvent splashes but not soakings. Small flange is 90mmod,67mmid and 18mm thick. Medium flange is 100mmod,72mmid and 19mm thick. Large flange is…
-
Borosilicate Glass Filtration Apparatus
Ace GlassBorosilicate glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…
-
Reaction Flask, Spherical
Ace GlassRugged spherical flask with neck opening of 4" (10.2cm). Standard size flasks use regular Glas-Col heating mantles of equivalent capacity. Length of straight section including flange, approximately 9.5cm (33/4 "). Uses 6496 Clamp for securing flask hea
-
Shake style culture flask with long style straight neck, accomodates either plastic or stainless steel closures. Without baffles.
-
-
Cylindrical, heavy-wall reaction flask with an integral fritted disc. Flask has flat flange top with an o-ring groove. For heads see 6528, 6529 and 6530 series. Can be used with 6517 quick clamp or two piece clamp. Bottom outlet tube.
-
Ace Glass Freeze Drying Flask
Ace GlassComplete fast-freeze flask with snap-on rubber cap and 1/2-inch or 3/4-inch O.D. plain or valve adapter, compatible with all major brand freeze drying manifold valves. Borosilicate flasks are designed for ease of handling, faster loading. Uniform wall weight maximizes heat transfer while…
-
Rugged cylindrical reaction flask Duran, flat, ground flange and O-ring groove, with an Easy Action Plug bottom outlet with Chemraz O-Rings for draining contents. For use with 6517 quick release clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone…
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Flask, Erlenmeyer, Standard Taper Joint
Ace GlassErlenmeyer flask with standard taper joint. Microscale versions, codes -42 & -44 have a 14/10, externally 20-400 threaded joint and supplied with a holed cap, PTFE faced silicone septum and FETFE o-ring.
-
Flask Single Neck, Side Arm, No-Air
Ace GlassRound bottom flask with single neck with standard taper joint and a 8mm side outlet with either a 2mm glass stopcock or a 0-3 inlet valve. Ideal for Schlenk lines and either NO-AIR or vacuum applications. Includes one 9096-32 septa for side arm.
-
-
Used for limit test for arsenic as described in European Pharmacopeia, 1997, page 51. Complete consists of 125mL conical flask with 24/40 joint, a capillary chimney with a pulled tip below 24/40 joint at bottom, #5 O-Ring joint at top with hooks for 3/4" springs, and an adapter tube with #5 O-Ring…
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 150mm (6") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Rugged cylindrical jacketed reaction flask with Duran, flat, ground flange and o-ring groove. Various bottom outlet options are available (see details below). For use with 6517 quick release clamp. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints or with…
-
Flask, Single Neck, Spherical, Receiving
Ace GlassWith short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.
-
Flask, Single Neck, Pear Shaped
Ace GlassPear-shaped, single neck, heavy duty flask. Available with ground, polished and cap-seal joints. The cap-seal flasks are used in the Ace microscale chemistry product line and feature a 14/10 ground joint with external threads. Supplied with a holed cap
-
Determines CO2 evolution to assess biodegradability by soil and sewerage micro-organisms. Shake flask fits standard laboratory shakers. #7 Ace-Thred side port with Nylon bushing and FETFE O-ring holds a glass septum adapter. Inner well has a capacity of 10 mL plus head space. Well is held securely…
-
Round bottom pressure flask, with either #15 or #25 PTFE plug seal top opening. This style also has a side thermowell port to facilitate a thermometer or a temperature probe to measure flask temperature without losing the pressure integrity of the vess
-
Flask, Three Necks, Jacketed, Heavy Duty
Ace GlassRound bottom flask with three in-line necks. Fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Jacket inlet/outlets are available with either tangentially sealed 28/15 o-ring ball joints or with #11 Ace-Thred connections
-
Distillation Apparatus, Ammonia
Ace GlassGenerally used for the determination of ammonia in water. Joints are standard taper 24/40.
-
Heavy wall cylindrical reaction flask with Duran grooved flange opening. Flask has Zero Dead Space, (ZDS), bottom valve. The valve features no material hang-up in the fully open position. When closed, the valve seats flush with the bottom of the flask. Includes one CAPFE o-ring. See Ace 6517 for…
-
Instatherm Reaction Flask and Head
Ace GlassRugged cylindrical reaction flask and head with Duran, flat, ground 4" flange with O-Ring groove and integral heating element that eliminates the local superheating commonly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. Response is rapid and…
-
Flask, Round bottom, Two Neck
Ace GlassRound bottom, two neck flask. Side neck is angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance.
-
Flask, Receiving, Rotary Evaporator
Ace GlassGraduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.
-
Round bottom flask with a 0-4mm Hi-Vac valve top with a 9mm side port designed to accept 3/8in Cajon fittings. The valved top gives the researcher precise flow control.
-
Equilibration Flask
Ace GlassDesigned by Dr. H.R. Krouse, University of Calgary, for use in H2O18/H2O16 determination. Unique design eliminates the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is…