Flasks, Supplies, Boiling Flasks
-
Flask, Round bottom, Two Neck
Ace GlassRound bottom, two neck flask. Side neck is angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance.
-
Florence Boiling Flasks
EiscoMade of high quality, heavy duty Borosilicate glass Narrow neck, flat bottom, beaded rim. Perfect for any science or home laboratory Florence boiling flask made out of high quality, heavy duty borosilicate glass. Narrow neck, beaded rim and flat bottom. No stopper included. …
-
SYNTHWARE Pear Shaped Flasks
Kemtech AmericaSYNTHWARE pear shaped, heavy wall, single neck flasks with a standard taper outer joint. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Round bottom flask with five necks arranged 3 in-line, two 90 degrees front and back of in-line necks. All necks are vertical. Available in heavy wall.
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
-
Flask, Two Necks, Vertical
Ace GlassTwo neck, one center and on vertical side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
SYNTHWARE Microscale Round Bottom Flasks
Kemtech AmericaRounRound Bottom Flask, One Neck, Threaded, Synthware, Capacity: 5, 10, and 25mL, Joint: 14/10, Supplied with one open top compressioncap and one size 014 Viton O-ring and one PTFE-faced septad Bottom Flask, One Neck, Threaded, Synthware, Capacity: 5,
-
PYREX® Long Neck Boiling Flask
CorningThese 100mL PYREX(r) round bottom boiling flasks have long necks with tooled mouths and take a rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Single Standard Taper Neck Heavy Wall Round Bottom Flasks
DWK Life Sciences (Kimble)Single neck flask with a Standard Taper outer joint Heavy wall Ref: ASTM Method D95 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
These PYREX(r) pear-shaped boiling flasks have full length outer 24/40 Standard Taper joints and are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance.…
-
Round Bottom Two Vertical Neck Flasks
SP Wilmad-LabGlassWith two vertical necks and a round bottom, these borosilicate glass flasks feature a side neck Standard Taper 24/40 outer joint. The center Standard Taper joint varies with flask capacity.
-
These PYREX(r) pear-shaped boiling flasks have full length outer 14/20 Standard Taper joints and are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance.…
-
SYNTHWARE Round Bottom Vertical Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Flat Bottom Flasks
Kemtech AmericaSYNTHWARE flat bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
Class A Mixing Bulb Style Wide Mouth Flasks with Standard Taper Stoppers
DWK Life Sciences (Kimble)Wide mouths allow easy access into these mixing bulb volumetric flasks for applications such as dissolving tablets and other solids. Mixing bulb in neck accommodates approximately one tenth of the flask’s total volume and is designed to aid in dissolving or mixing the contents of the…
-
SYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Flasks, Quartz, Flat Bottom, Single Neck
ChemglassSingle neck, flat bottom, quartz flask with standard taper outer joint.
-
Flask, Single Neck
Ace GlassRound bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Borosilicate Glass Flat Bottom Boiling Flasks
United Scientific SuppliesBorosilicate Glass Flat Bottom Boiling Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack.
-
Round Bottom Four-Neck Flasks
SP Wilmad-LabGlassAvailable in various sizes, these borosilicate glass round bottom flasks have four vertical necks - one center neck and three side necks which are 90° apart. All necks have Standard Taper outer joints.
-
Flask, Round Bottom, 3 Neck, Angular
United Scientific SuppliesUnited Scientific™ three-necked boiling flasks with ground glass 24/40 joints are made from low-expansion borosilicate glass. Feature uniform wall thickness for superior mechanical strength and shock resistance. 24/40 ground glass joints Available in four capacities Made from…
-
Borosil® Flat Bottom (Florence) Boiling Flasks have uniform wall thickness for even heat distribution. Constructed from stress-free borosilicate, Borosil® Boiling Flasks are heat-resistant. Built to withstand the demands of the modern lab, each flask has a flame-polished, beaded rim for…
-
SYNTHWARE Pear Shaped Flasks
Kemtech AmericaSYNTHWARE pear shaped, heavy wall, two neck flasks with an angled side neck. All joints are standard taper outer joints. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Pear Shaped Boiling Flasks
DWK Life Sciences (Kimble)Single-neck flask with a Standard Taper outer joint at top Heavy wall Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Round Bottom Five Neck Flask, Ace-Thred
Ace GlassRound bottom flask with five necks arranged 3 in-line, one standard taper front and one #7 Ace-Thred front (ideal for suspending a thermometer or probe). All necks are vertical. Available in heavy wall. Supplied complete with a 5029-10 nylon bushing an
-
Round bottom Short ring neck These PYREX® round bottom boiling flasks have short ring necks. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering…
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.
-
-
ValueWare® Round Bottom Flasks, Short Neck, Full-Length
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Round bottom, HEAVY WALL single short neck flask for use on rotary evaporators for receiving distillate. Joint at the top of the flask is a 35/25 socket. Plastic Coated to prevent injury from broken glass while preventing spillage of hazardous materials.