Flasks, Ready to Ship
-
Multiple Well Plates
Celltreat ScientificAvailable in 6, 12, 24, 48 and 96 well flat bottom configurations NEW — 96 well plates now available with a round bottom Plates are labeled with alpha-numeric markings for easy identification of individual wells Each well has a raised rim which nests into the rings on the single…
-
Tissue Culture Flasks
Celltreat ScientificCELLTREAT Tissue Culture flasks are manufactured under the most stringent conditions and include a 100% integrity test to assure the reliability with your tissue and cell culture work. Class 100,000 clean room, USP class VI virgin polystyrene, and ISO 9001:2000 quality management systems all…
-
Borosil® Amber Light Blocking Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL…
-
KIMAX Kjeldahl Flasks
DWK Life Sciences (Kimble)Reinforced bead at top 300 mL and larger sizes have tooled necks 10 and 30 mL sizes are designed from ASTM Specification E 147; 100 mL through 800 mL sizes are designed from ASTM Specification E 1377, Type 1 requirements.
-
Erlenmeyer Flasks with Screw Caps, with Capacity Scales
DWK Life Sciences (Kimble)KIMAX flask with a screw-thread finish. Used to mix and store culture media, and in other culturing techniques. Included are long caps with cemented-in white rubber liners, not attached. Designed from ASTM Specification E1404, Type III.
-
Sterile Flask of optically clear polystyrene, tissue culture treated Plug seal screw cap of polyethylene Incorporate a 0.2 micron microporous membrane filter into a standard Corning® Falcon® plug seal cap to prevent contamination while providing improved consistency in gas…
-
Helps adapt cells to reduced serum or serum-free conditions 25, 75 or 150 cm 2 sizes 10, 60 or 210 mL maximum working volumes Rectangular canted neck cell culture flasks have been treated with a patented Corning® CellBIND surface treatment for optimal cell attachment.…
-
Flask, Volumetric, Class A, Cap, 50 ml
DWK Life Sciences (Kimble)Permanently marked with an individual serial number, providing an easy way to track items used during analytical testing Carefully selected to meet the Class A requirements as specified in ASTM E 288 - Standard Specification for Volumetric Flasks Supplied with a Certificate of Graduation…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Filtering Flask
United Scientific SuppliesHeavy wall filtering flask includes a bolt neck with tubulation. Borosilicate glass flasks are designed to give the best combination of thermal shock resistance and physical strength. Feature heavy-duty rims and printing in durable white enamel.
-
Volumetric Flask, Class A, with Glass Stopper, Batch Certified
United Scientific SuppliesDurable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A ground glass stopper is included. Meets Class A specifications per ASTM E-288. Batch certified.
-
Sterile PC Erlenmeyer Flasks
DynalonSterile, polycarbonate flasks with baffles. Virtually unbreakable Lexan (registered trademark of GE Plastics) polycarbonate is used in the manufacture of this product. Flask comes sterile via gamma irradiation, packaged in its own protective bag with a polypropylene, 38 mm, dual purpose cap.…
-
Treated Cell Culture Flask
labForce® (powered by Thomas Scientific)Made of high clarity, 100% virgin polystyrene. Sterilized by E-beam, SAL=10-6. Non-Pyrogenic, DNase/Rnase free cell culture bottles. Frosted writing and clear graduations. Notched bottom for slip free stacking. Clear lot number for batch traceability. Cell culture bottles packaged…
-
SYNTHWARE Round Bottom Flasks
Kemtech AmericaSYNTHWARE round bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
PETG Erlenmeyer Flasks
NEST Scientific USAIdeal for shaker culture applications. PETG Bottle & HDPE Cap Sterilized by E-Beam Nonpyrogenic Packaged in sterile bags Non-toxic and environmentally friendly.
-
Borosilicate Glass Flat Bottom Boiling Flasks with Ground Glass Joints
United Scientific SuppliesBoiling, flat bottom flasks with ground glass joints. Our boiling flasks are made from low-expansion borosilicate glass Feature uniform wall thickness for superior mechanical strength and shock resistance Ideal for boiling, heating and mixing in the laboratory
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
Glass Erlenmeyer Flasks, Set of 5
United Scientific SuppliesA convenient set of 5 glass erlenmeyer flasks in sizes 50ml, 125ml, 250ml, 500ml, and 1000ml
-
SYNTHWARE Erlenmeyer Flasks
Kemtech AmericaSYNTHWARE Erlenmeyer flask with standard taper outer joint. All sizes are hand blown from tubing to ensure heavy and uniform wall.
-
KIMAX Brand Volumetric Flasks With Stopper
DWK Life Sciences (Kimble)Calibrated "to contain", they are designed from ASTM Specification E288, Class B requirements Sizes 10 through 50 mL include Standard Taper 9 glass stopper; size 100 mL, Standard Taper 13; sizes 200 and 250 mL, Standard Taper 16, size 500 mL, Standard Taper 19; 1,000 mL, Standard Taper…
-
Class A Volumetric Flasks with Snap Cap, Batch Certified, QR-Coded
United Scientific SuppliesDurable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A plastic snap cap is included. Meets Class A specifications per ASTM E-288. Batch Certified. Our volumetric flasks feature QR code integration to facilitate quick and easy…
-
Erlenmeyer and Fernbach Flasks
Celltreat ScientificDesigned for mammalian suspension culture applications as well as bacterial & yeast culture Available with either solid or vent cap to eliminate the chance of unintended venting, unlike combination caps Vent caps feature 0.22µm hydrophobic membrane which allows for gas exchange…
-
Erlenmeyer Flasks
United Scientific SuppliesBorosilicate Glass Erlenmeyer Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack, Wide Mouth.
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
BioFactory™ Systems
NEST Scientific USANest BioFactory™ Systems are compact, multi-layer, single-use cell culture systems designed for easy scale-up cell culture applications, such as production of vaccines, monoclonal antibodies or pharmaceuticals. Versatile, easy-to-use systems for small scale research or commercial production…
-
Cylindrical Form Dewar Flasks With Extended Base
Pope ScientificSimilar to 5028M40 series, but aluminum base extends up to mouth of flask Without plastic mesh
-
These PYREX VISTA volumetric flasks are designed for use by customers that do not require the precision accuracy of our Class A capacity flasks. The shape, body and wall are the same as regular flasks but display the large blue marking spot and designation "PYREX VISTA" unique to the…
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
Iodine Flasks
CorningFor the determination of the iodine number of oils, fats and waxes by the Wijs and Hanus methods Flaring, funnel-shaped lip and Standard Taper 22 stopper
-
TriForest Erlenmeyer Shaker Flasks are manufactured with virgin, optically clear, non leaching LEXAN® Polycarbonate resin that retains clarity after gamma radiation. The flasks are certified pyrogen free, DNase/RNase free, ideal for cell cultures, microbial cultures, plants, media preparation,…
-
Class A Volumetric Flasks
SP Wilmad-LabGlassThese borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They are supplied with a standard taper penny head glass stopper. Calibrated "to contain" at 20°C. Reference: ASTM E288 and Federal Specifications NNN-F-289.…