Filter Flask

Compare Tool

Select up to 3 products

Filter Flask
1 - 32 of 181
Sort
View
Show
  • Filtering Flask

    United Scientific Supplies

    Borosilicate Glass Filtering Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack, Narrow Mouth, Heavy Wall; Bolt neck with tubulation.

  • PYREX Vacuum Filter Flask

    Corning

    For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

  • Filtering Kit

    United Scientific Supplies

    An excellent, faster working, alternative to traditional gravity based liquid filtration. Contents: 500ml Filtering Flask 90mm porcelain Buchner Funnel Hand Vacuum Pump with Gauge Pack of 90mm Filter Papers (pack/100) Rubber Stopper Vacuum Hose Instruction Manual

  • Sigma-Aldrich® vacuum filtration assembly

    MilliporeSigma

    for 47 mm filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent…

  • SYNTHWARE Filter Flasks

    Kemtech America

    SYNTHWARE filter flask with standard taper outer joint and 10mm O.D. hose connection. All sizes are blown from tubing to ensure heavy and uniform wall.

  • KIMAX Heavy Wall Filter Flasks

    DWK Life Sciences (Kimble)

    …for tubing Sizes 25 mL through 4000 mL Designed from Federal Specifications NNN-F-240 Scale indicates approximate volumes Flasks are fabricated from molded heavy wall for strength and have a beaded bottom surface that prevents scratching and slippage for additional safety.

  • 47mm Filtration Assembly with Standard Taper 40/35 Joint Connection and Fritted…

    DWK Life Sciences (Wheaton)

    …hose connection is located above the filtration drip tip to prevent contamination in the vacuum line Filter area approximately 9.6 cm 2 capacity of funnel 300 mL; capacity of flask 1 L; vacuum connection 6.35 mm o.d.; dimensions 140 mm diameter flask, 76 mm diameter funnel and 430 mm high.

  • PYREX Heavy Wall Filter Flasks

    Corning

    Without tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL

  • Graduated Filtering Flasks with Quick-Release Hose Barb Connectors

    DWK Life Sciences (Kimble)

    KIMAX® heavy wall filter flasks have a quick-release connector designed as a safety feature Hose barb accommodates 1/4 inch ID tubing Tubing can remain permanently attached since the opposite end is designed to be easily assembled via a positive threaded seal Proper positioning of…

  • PYREX Heavy Wall Filtering Flasks

    Corning

    …walls Graduated Replaceable tube These PYREX heavy wall flasks have a seated bent, removable plastic tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords…

  • 1000 ml Flask, Filter, Ctd, 40/35

    DWK Life Sciences (Wheaton)

  • Polypropylene Filtering Flasks

    Thermo Scientific Nalgene

    Polypropylene flasks are molded in one piece to withstand full vacuum to 30" Hg Oval marking area Autoclavable Tubulation at 45° angle prevents tipping. Barbed adapter accepts 1/4" to 3/8" I. D. tubing

  • PYREXPLUS® Filter Flask

    Corning

    Protective PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is…

  • PYREX® VISTA™ Filtering Flasks

    Corning

    …the flask through a ground joint or rubber stopper. The applied vacuum facilitates the filtration process. These flasks have permanent blue enamel marking spots. The filtering flask is designed to ASTM E-1406 Type 2. Heavy Wall Filtering Flasks These PYREX® VISTA™ filtering flasks

  • Aldrich® filter flask capacity 1000 mL, stopcock for 3-way

    MilliporeSigma

    Synonym: filter flask, filter flasks, filtering flasks, flask filter General description 1,000 mL, with 3-way glass stopcock. Allows waste solvent to be drained from flask via stopcock without disassembly, thus minimizing breakage. Use with NMR tube cleaners, Gooch crucibles, and Buchner…

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    …for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and ground joint flask. Membrane filters are not included. Filter diameter…

  • Filter Flask with Stopper Joint

    Wilmad LabGlass

    This borosilicate glass heavy wall filtering flask can be used with FILTERWARE® Filtration Apparatus (LG-1755). Supplied with a silicone stopper with 9/16" hole and a #2 hose connection, the 4000mL flask has 1/2" connections.

  • Scienceware® Filtering Flask with Side Arm

    Bel-Art Products

    These flasks, also called vacuum flasks, have a side-arm with a 45° downward angle to prevent tipping.   Reduce broken glassware with this flask constructed of FDA grade polypropylene Side Arm accepts flexible tubing from 3/8" to 1/2" I.D. 1000 ml capacity

  • Filter Funnel, Threaded

    Thermo Scientific Nalgene

    Polysulfone Durable and non-toxic Screw-type closure holds membrane in place Autoclavable Can be used with any filtering flask or manifold that accepts a suitable rubber stopper with hole. Includes one easy-to-use, no-twist Nalgene® vacuum gasket, which can replace a No. 7 or 8 rubber stopper…

  • PYREX Micro Tubulation Flask

    Corning

    Small filtering flasks are recommended for microchemical use All flasks have permanent white-enamel marking spots Takes rubber stopper No. 3; 50 mL size, No. 4; 125 mL size, No. 5

  • KIMAX Narrow Mouth Erlenmeyer Filter Flasks

    DWK Life Sciences (Kimble)

    … ASTM Specification E 1406, Type I With capacity scale 250 mL flasks take rubber stopper No. 6; 500 mL flasks take No. 7; 1,000 mL flasks take No. 8; 2,000 mL flasks take No. 9; 4,000 mL flasks take No. 12. Flasks are fabricated from molded heavy wall for strength and have a beaded bottom…

  • Whatman SF 100 Suction Flask

    GE Healthcare

    SF 100 Suction Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories SF 100 Suction Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories

  • Whatman WT 100 Witt's Flask

    GE Healthcare

    WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. The bottle is made…

  • KimCote® Filtering Flasks

    DWK Life Sciences (Kimble)

    … All flasks have a side arm for connection to 3/8” (6 mm) ID flexible tubing Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements A second flask should be connected between the filtering flask and the…

  • Erlenmeyer Flask, 250mL, with Filter

    Corning

  • KIMAX Graduated Filtering Flasks with Detachable Plastic Sidearms

    DWK Life Sciences (Kimble)

    …for easy insertion into a neoprene grommet by turning the plastic piece Opening in the sidearm is larger at the flask end to hold a cotton plug securely All flasks have durable white ceramic enamel scales to indicate approximate volumes at various levels Designed from ASTM Specification…

  • Filter Assy 90mm w/2L Flask

    DWK Life Sciences (Kimble)

    … Each apparatus is supplied with 1000 mL funnel, 90 mm glass support base, 40-60 micron porosity fritted glass disc, anodized aluminum clamp and filtration flask Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

  • Flask, Filtering, Heavy Wall, with Stopcock

    Ace Glass

    With 24/40 standard taper outer joint and stopcock on hose connection outlet.

  • Glassware Assortments

    United Scientific Supplies

    …x .10ml graduations, one pack of six 25ml transfer pipettes, and one each 50ml Double Scale Cylinders, 100ml Double Scale Cylinders, 50ml PTFE stopcock Straight Bore Burrette, 500ml Filtering Flask, 50ml Snap Cap Volumetric Flask, 100ml Snap Cap Volumetric Flask, and one 500ml Separatory Funnel.

  • 125 ml Flask, Filter, Grad, No 5 Stopper Jt

    DWK Life Sciences (Wheaton)

  • Fast-Freeze Flasks Filter Paper

    Labconco

    38 mm diameter Fits all sizes of Thomas series 5119B02 Flasks

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.