Overview Durapore ®  membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits Available in…

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. 33 mm Millex filter units provide greater throughput than the 25 mm units Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than…

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig (10…

Biologically inert mixtures of cellulose acetate and cellulose nitrate have made MF-Millipore™ membrane filters one of the most widely used membranes in analytical and research applications. Features & Benefits Versatile filter for biological and environmental monitoring…

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables -…

Overview Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility,…

Steritop bottle top filter units provide a large filter area for rapid sterile filtration of aqueous fluids into narrow-mouth (33 mm) or wide-mouth (45 mm) bottles. A small tab inside the funnel secures an optional prefilter in-place during filtration. For added protection against contamination,…

This 25 mm syringe filter with a Mixed Cellulose Esters membrane, for non-sterile filtration, has a 0.22 µm pore size used in Fine particle removal from aqueous solutions. Designed for fine particle removal from aqueous solutions Polyvinyl Chloride (PVC) housing Hydrophilic…

With their vertical membrane design, Amicon Ultra 0.5 mL filters deliver great performance and lower spin times This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein…

This 25 mm syringe filter with a Graduated Glass Fiber & Nylon membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of aqueous & mild organic solutions with high particulate levels. Low-extractable polyethylene housing Female Luer-Lok™…

Provides fast sample processing, high sample recovery This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 50 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The…

For accurate testing and sample processing, and to assure traceability, membrane catalogue number, lot number, pore size and sequential number (from 1 to 150) are printed on the clear, protective cover of every membrane cell. Unused membranes remain safely packed in pleated band. No special…

This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The vertical design and available membrane surface area provide fast…

This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. Amicon Ultra-0.5 Centrifugal Filter Unit with Ultracel-10 membrane …

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables …

Reusable filter unit used to ultraclean or sterilize small volumes dispensed by syringe. 25mm microsyringe filter holder Stainless-steel housing Polytetrafluoroethylene (PTFE) seals Filtration area: 3.9cm2 Luer-Lok™ inlet Male Luer-Slip™ outlet …

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

Biologically inert mixtures of cellulose acetate and cellulose nitrate have made MF-Millipore™ membrane filters one of the most widely used membranes in analytical and research applications. Features & Benefits Versatile filter for biological and environmental monitoring…

This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. 25 mm syringe filter is recommended for filtering 10–100 milliliter (mL) volumes to remove particles prior to…

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

STERICAP™ BOTTLE-TOP FILTERS Millipore Express ® PLUS PES membrane for fastest flow rates and low protein binding Fits any vacuum-rated bottle from 20 to 67 mm in diameter for maximum versatility High volume…

This Ultrafree-CL is a non-sterile centrifugal filter unit with a pore size of 0.45 µm, well suited for the removal of particles & precipitates from aqueous & some solvent-based samples. Ideal for use with protein and nucleic acid solutions Color coded to indicate membrane…

With their vertical membrane design, Amicon Ultra 0.5 mL filters deliver great performance and lower spin times This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 50 kDa. Amicon Ultra centrifugal filters are ideal for protein…

Provides fast sample processing, high sample recovery This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The…

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

Provides fast sample processing, high sample recovery This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The…

An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in…

Synonyms: filter bottles Legal Information: TPP is a registered trademark of TPP Techno Plastic Products AG

The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron…

The Swinny Stainless Steel 13 mm Filter Holder is designed to ultraclean or sterilize small volumes of liquids by pressure filtration. The filter holder is useful for sterilizing tissue culture media or ultracleaning HPLC samples, solvents, etc. Sample is introduced into the filter holder…

Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions. Type AP15 Lowest dirt-holding capacity …