All plastic construction. Dual scale range is 6" or 150mm. Readability is 1/128" or 0.05mm.

Weights are made of brass, with nickel plated surfaces. All weights are carefully tested and calibrated. Analytical Weight Box contains a total of 9 weights from 1 to 100 grams, in polished wooden box, with fractional weights, rider and forceps.

Introductory level metric micrometer graduated to read up to 25mm in 0.01mm division. Comes in a plastic storage case.

21st century New York Balance is ideal for demonstrating basic physics principles including levers and center of gravity. Set includes a demonstration balance support, three knife edge lever clamps, a half meter stick, one 50g hooked weight, and one 100g hooked weight. Includes activity guide.

Featured displays of this electronic alarm stopwatch include time (hours-minutes-seconds, with 12 or 24 hour mode option), calendar, 24-hour stopwatch, alarm, hourly chime, 1/100 second chronograph, split time, and total time. It is lightweight, easy to operate, ad comes complete with battery and…

Set of 9 weights consisting of 1 each 10g, 50g, 100g, 500g, 1000g, and 2 each 20g, and 200gram weights. Weights are made of cast iron with a black enamel finish. Replacement weights are available separately.

Individually calibrated weights made of high quality stainless steel. Both sets come with a sturdy plastic storage block. Set of 9 includes 1 each of 5g, 10g, 50g, 100g, and 500g, plus 2 each of 20g and 200g weights. Set of 10 includes all of the previously mentions, plus 1 each 1000g weight.

These weights feature flat countersunk bottoms, with a double-ended hooked rod through the middle. They can be used on balance pans, as well as hooked in tandem for lever arm studies. Set of 9 weights consisting of 1 each 10g, 50g, 500g, 1000g, and 2 each 20g, 200gram weights. Weights are made of…

Weights are made of brass, with nickel plated surfaces. All weights are carefully tested and calibrated. Analytical Weight Box contains a total of 9 weights from 1 to 100 grams, in polished wooden box, with fractional weights, rider and forceps.

Includes a 50g aluminum hanger and 12 aluminum weights, 9 x 20g, 1 x 10g, and 2 x 5g.

Use this simple apparatus to measure relative humidity. Includes two plastic-backed Celsius thermometers, one for dry bulb measurements and the other for wet bulb measurements. The thermometers mount on a wooden handle so they can be spun to obtain tem

This precision measuring tool is made of hardened steel for precision and durability. It has a range of 150 MM and a large, easy-to-read dial with a resolution of 0.02 MM. A storage case and instructions are included. Shipping weight: 6.5 Oz. dimensions: 9" x 0.75" x 0.25".

Economical stainless steel Vernier calipers with 125mm/5 inch capacity. Features inside and outside jaws, full length depth gauge, friction ruler and sliding lock for gauging. Graduated in millimeters and 1/16".

These Spring Scales come in a clear plastic case, metal pointer, spring, suspension ring, and load hook. Scales are calibrated in Grams, Newtons, or both, with zero adjustment. Other prices are available; call for prices.

Deluxe slotted weight set with rack, 8 weights, brass. Includes 1x500g, 2x200g, 1x100g, 1x50g, 2x20g, 1x10g, rack. Deluxe slotted weight set with rack, 10 weights. Deluxe slotted weight set with rack, 12 weights, brass/aluminum. Includes 1x500g, 2x200g, 1x100g, 1x50g, 20g, 1x10g, 1x5g, 2x2g,…

This high quality set of 12 drilled balls is great for conducting all of your pendulum experiments.  Each set contains 2 each of brass, aluminum, steel, wood, cork, and copper balls. A 3mm hole is drilled through the center of each ball. Every set comes in a convenient plastic storage case, with a…

This new model has a much larger capacity (100 ML) than the traditional aluminum model (22 ML) for higher accuracy and easier operation. Also, both the cylinder and the cup have marked divisions which allow the students to repeat the experiment with different volumes. The cylinder is made of white…

This measuring set contains four high quality instruments-a 0-25 x 0.01 MM micrometer caliper, a 90 degree knife edge square, a 150 x 0.05 MM vernier caliper, and a 150 MM steel ruler. All of these are housed in a sturdy plastic storage case.

Good quality weight set contains 9 weights (1 each of 1g, 5g, 10g, 50g, and 100 g sizes, and 2 each 2 g and 20g sizes) plus a set of 1 to 500 mg fractional weights and a 5 mg rider and forceps, in a wooden storage box. Weights are made of polished stainless steel and each weight is inscribed with…

For use with slotted weights. Available in aluminum or brass. Each weighs 50g. Stem length is 16 CM for aluminum hanger, 11.5 CM for brass hanger.

Set of 6 hooked aluminum masses with a plastic storage base.

Use this convenient set to perform various pulley demonstrations. The durable 20cm x 15cm base is fitted with a capstan and a 61cm tall aluminum support rod. Also includes a 20cm crossbar with clamp.  Includes activity guide. Contents Wooden base with capstan, hook and rod…

This versatile tape measure is perfect for a wide variety of applications. The bright yellow steel tape retracts with a simple push of a button. It also features a high impact plastic case with a belt clip and loop handle. The tape is marked in both English and metric.

Two identical sized screw cap metal cans (one smooth metal and other painted dull black) to demonstrate the difference in cooling rates of hot water inside the cans due to different surfaces.  The difference in the cooling rates is attributed to the thermal radiation emitted by the two cans. …

Balls sold individually and in a variety of sets. Choose from aluminum, brass, copper, cork, glass, lead, steel, wood, and zinc. Sizes include 19mm and 25mm. Pick from one of the following styles: drilled center hole, solid, and with hooks. Ball sets include: 42003-19: 19mm diameter with…

This 25 foot / 7.5 meter metal blade tape measure is 1" wide and is scaled in 1/16" increments on one side and 1mm increments on the other side. Features an easy to read lockable, retractable yellow blade and high-impact ABS case.

Durable, lightweight plastic instruments, designed for whiteboards/chalkboards. Triangles, protractor, and ruler are made of white polystyrene and feature handles for ease of use. Compass is made of clear acrylic, and accomodates most dry erase and magic markers. Triangle, 45 degree, 23" base, 16" sides.

A fine instrument for determining the radius of curvature of spherical surfaces such as mirrors and lenses. Its micrometer screw is graduated to measure displacement as small as 0.01mm. The instrument has two brass plates and three steel legs. A flat glass plate is provided for support while…

These drilled balls are excellent for use as pendulum bobs or in impact and collision experiments. All drilled balls feature 3mm countersunk holes so pendulum cord knots can be recessed.

Hardwood half meter stick for use with our Demonstration Balance Support or other laboratory measurement activities.

This micrometer is made of hardened steel for precision and durability. Its range is 0-25 MM and it has a precision rotary scale with a resolution of 0.01 MM, a ratchet thimble, and a locking lever. Instructions are included. Shipping weight: 9.5 Oz., dimensions: 6" x 4" x 1.5".

This clear plastic 12" ruler is scaled in 1/16" increments on one side and MM on the other.