The BYK-Gardner Weight Per Gallon Cup is a simplified form of pycnometer specially designed to measure the density of a fluid at a standard temperature of 77°F (25°C). The net weight of the air-free sample is determined to the nearest 0.1 gram, and converted by simple factors to either…

Sterile, disposable polypropylene containers provide secure sample containment      Available in 4 1/2 oz. (110 mL) and 8 oz. (220 mL) sizes both with and without matching lids      Feature molded-in graduations for easy measurements      Graduated…

4.5 oz Specimen cups with lids Sterile or non-sterile 1228Z64 are individually wrapped

These polystyrene (PS) micro sample cups are designed for use on automated instrumentation including the Hitachi®, Elecsys®, Cobas Integra® and Core® analyzers.

Made of polystyrene These sample cups will hold perfectly on top of blood collection tubes. Just pour the blood sample into a SeraNest™ and its low shoulder will hold securely on tube. No need to relabel. Two sizes available.

Graduated: 10 ml and .5 oz increments up to 120 ml Containers are available with lids, ensuring leak-resistance Printed lids can be purchased separately or with the containers.

Tight sealing lid ensures that your sample will arrive in the lab safe and dry! The patented lid is designed to securely lock in the sample. When you use the SureTight, you can be confident that your sample is safely contained in the cup and will remain that way throughout transport to the…

Durable Full turn thread for improved sealing Meets NCCLS guidelines (M29-T2, Vol.11, No. 14) These 4 oz., 120 mL containers have molded metric and U.S. graduations on two sides. The walls are thicker and more resilient, making them shatter resistant. The cap is flat and frosted to accommodate…

Used in the analysis of a wide variety of samples.

Globe Scientific's sample cup is designed for use with the Abbott® Architect® Series Analyzers. The sample cups are packaged 1000/bag. Note: All instruments and names of manufacturers mentioned herein are the trademarks of their respective companies and are used for reference…

Translucent cups suitable for dispensing both liquid and dry medications Calibrated from 1-8 drams, 1/8-1 fluid ounce, 1-2 tablespoon and 2.5-30 mL and cc Plastic

Medicine cups are either translucent or clear for accurate measuring and recognition of contents. Polypropylene cups are unbreakable. Graduated: 1/8, 1/4, 1/2, 3/8, and 1 oz. In drams between 1 to 8, in 1 dram increments. At 1/2 and 1 tbsp. At 1 and 2 dssp. and cc/mL At 21/2, 5, 71/2, 10, 15,…

Globe Scientific's polyethylene (PE) sample cup is flexible and designed for use on hematology cell counters including Cell-Dyn® and other brands. Also referred to as the "TOA cup".

Container Specimen Kit, Assorted ( 1212W67) Assorted disposable specimen container kit containing 100 total pieces of white opaque containers as follows: (25) 4 oz, (20) 8 oz, (20) 16 oz, (20) 32 oz, (10) 68 oz and (5) 163 oz. White opaque lightweight containers with tight- fitting lids.…

Globe Scientific provides a complete line of sample cups and tubes for use on the Beckman® analyzers.

Used in the analysis of a wide variety of samples. Compatible with various automated chemistry analyzers.

This polyethylene sample cup is designed for use on automated instrumentation including the Cobas Mira®, Bio®, Fara®and Horiba ABX® analyzers. The sample cups feature an attached snap cap and are available in 5 colors.

Available in polypropylene, polystyrene and polyethylene to better fit your laboratory needs Friction-fit type lid Resistant to certain solvents and freezing. Virtually free of trace metals or lubricants.

The nesting sample cup is used when smaller sampling is necessary. It is used in conjunction with other test tubes or original blood collection tubes. To use, simply transfer the sample from the original collection tube into the nesting cup. Then, place the nesting cup inside the original…

Bio-Tite caps create leak-resistant seal for superior safety and handling Dual-threaded caps create improved sealing Sterilized by gamma irradiation, which eliminates potential contamination Top and bottom positive grip knurls are easy to grip and open using latex gloves …

Globe Scientific's polypropylene (PP) sample cup is designed for use on automated instrumentation including Alpha Wassermann® ACE and Gilford® analyzers.

Polystyrene (PS) For use on laboratory analyzers

Used in the analysis of a wide variety of samples.

Non-sterile Containers made of virgin polypropylene—resist cracking, splitting Highly resistant to most chemicals including formaldehyde Molded graduations for fill line verification Translucent containers allow for viewing container contents Secure fitting…

Globe Scientific's polystyrene (PS) sample cup is designed for use on automated instrumentation including the Abbott AxSym® and Architect® analyzers.

Sample Cups. Polystyrene. 2 ML size for use in autoanalyzers. Product Dimensions (l x w x h) : 0x0.587x0.984in Sample Cups. Polystyrene. 1.5 ML size for use in autoanalyzers. Product Dimensions (l x w x h) : 0x0.594x0.894in Sample Cups. Polystyrene. 4 ML size for use in…

Globe Scientific supplies a complete line of cuvettes, sample cups and printer paper for use on the Elan® Atac® 6000 & 8000 analyzers.

Made of polystyrene Capacity: 2 ml Diameter: 12.5 mm

Globe Scientific's polystyrene (PS) Cuvette is supplied with metal mixing bars and is designed for use on the CU® 500, Fibrintimer® II (BFT2), Coadata®, Accustasis® and other brands of coagulation instruments.

White, 1,000/Case Lids for 16 oz cups