Condensers, Ace Glass, Nucleic Acid Sample Preparation
-
Condenser, Spiral
Ace GlassWith spiral condensing tube having both inlet and outlet connections at top, on same side. With joints. Length between joints is approximately 80-90 mm longer than the stated coil length. Available with PTFE clad bottom joint.
-
Condenser, Finger, with Joint
Ace GlassCold finger condenser for use with our 7756 series Schlenk reaction vessels.
-
Micro Soxhlet, Improved Design
Ace GlassDesigned for small chemical applications. Improved design permits greater condensing capacity. Condenser approximately 139mm jacket length. Joint between condenser and extractor is 24/25. Flask joint is 14/20. Designed to accommodate paper thimble, size 10 x 50 mm. Flask is 30mL capacity. Hose…
-
Double-jacketed, with standard taper 24/40 inner and outer joint at bottom and top. Extra cooling capacity for volatile materials. Compact design retards diffusion. With #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for
-
Condenser, Long Path
Ace GlassTurbulent flow created makes this condenser very desirable for use under reduced pressure. Internal and external cooling surfaces result in high efficiency per unit length. Joints are standard taper 24/40.
-
Condenser, Dewar
Ace GlassFor use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size
-
Condenser, Cold Finger
Ace GlassJacket length is measured from the lower shoulder of the bulb to the bottom of the finger. Diameter of tube is 14mm. Used in 6472 Pilot Plant Reactor.
-
Micro cold finger condenser with drip tip on bottom for directing drops into the well of 14/10 jointed 9576 or 9599 Hickman Stills. Cold water is introduced into cold finger periodically by means of a Pasteur pipet. Complete item consists of cold finger condenser and multi- purpose vacuum adapter…
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Condenser, Dewar
Ace GlassFor use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size
-
Condensers/Coolers, Rotary Evaporator
Ace GlassReplacement, borosilicate glass components for R220 rotary evaporators Product offering includes triple coil condensers, Bullfrog condensers and the lower condensate coolers for rotary evaporators. Available in either plain or safety coated versions. Units include black SVL caps & red GL thread…
-
Condenser, Reflux, Spiral
Ace GlassSpiral coil, reflux condenser with angled top outer joint and two equal side arms with size C hose connections.
-
Sublimation Adapter, Adjustable
Ace GlassMicroscale sublimation adapter with vertically adjustable condenser tube that allows use with 3 mL, 5 mL, and 10 mL microscale vessels. Two-piece adapter features a #7 Ace-Thred at top of vacuum adapter that, with Nylon bushing and O-Ring, forms a compression seal with condenser tube, bottom 14/10…
-
The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.
-
Condenser, Graham
Ace GlassWith standard taper 24/40 outer joint at top. Hose connections are size D, for 3/8in ID tubing.
-
Condenser, Liebig, No Hold Up
Ace GlassWith standard taper 24/40 outer joint at top. Jacket length 300 mm. Hose connections are size D.
-
Used with Pressure Reactors, listed in Reaction Section. Heavy wall condenser has a #15 Ace-Thred at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thred on 6433 Reactor Head, One-Piece Pressure Reactor or any vessel with a #15…
-
Condenser, Pilot Plant
Ace GlassHighly efficient. May be used either for through condensation or refluxing. Internal baffling acts as impinging surface for entrained particles and discourages diffusion loss. Available with hose barbs or Ace-Safe connectors.
-
Bulb type for use with regular extraction apparatus. Improved design permits greater condensing capacity. Jacket lengths approximately 255mm with one bulb per 50mm.
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and standard taper 24/40 inner joint at bottom. Top tubulation tooled to take No. 3 stopper. Jacket length 250mm. Hose connections are size D.
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50 mm, with 24/40 standard taper inner joint at bottom.
-
Condenser, Cold Finger
Ace GlassCold Finger accessory for standard distilling heads and systems. This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 6606, 6609, and 6613 distillation h
-
Condenser, Allihn-Kronbitter, No Hold-Up
Ace GlassWith surface of bulbs on one side and the other side flat to permit its use on an angle. With standard taper 24/40 inner and outer joints at top and bottom.
-
Condenser, Coil Reflux, Microscale
Ace GlassHigh efficiency coil condenser especially suited for vacuum applications. Coil length is 70mm. With 14/10 inner and outer joints; outer joint is externally threaded to allow an O-RING-CAP-SEAL connection with mating inner joint. Supplied with cap and O-Ring.
-
Condenser, Friedrichs
Ace GlassReflux controlled by regulating jacket temperature. Provides compact spiral path for condensation. Jacket length 200mm. Bottom standard taper 24/40 joint.
-
Condenser, Allihn, Angled
Ace GlassBorosilicate glass Allihn style condenser except with a 45 degree angle from bottom joint. New Style saves height space vs. standard vertical condensers. Has matching top and bottom standard taper joints Hose barbs are size D glass, off side of body to
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and standard taper 24/40 joint at bottom. Jacket length 250mm. Hose connections are size D.
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and joint at bottom and top. Jacket length 250mm. Available in various joint sizes with hose barbs or Ace-Safe connectors.
-
Condenser, Graham
Ace GlassWith standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D, for 3/8in ID tubing. con-nections are size D.
-
Condenser, Reflux, Bulb
Ace GlassBulb style condenser with drip-tip bottom joint. Provides high efficiencies in a compact size.
-
No Hold Up condenser with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred inlet/outlet for connecting Ace-Safe hose connections with barb for 1/4" I.D. tubing. For replacement hose connections, see 5853. Complete item include
-
Condenser, Air Reflux
Ace GlassMicroscale air condenser normally used in reflux experiments. When packed with desiccant material, condenser becomes a drying tube. With inner joint at bottom, outer joint at top. Codes -10, -14 and -17 supplied with drip tip for use with 9595 Spinning Band Column. Effective length, approximately…