Combination phase for SPE analysis of PCBs Features SiOH-H2SO4: H2SO4-impregnated silica phase for oxidation of accompanying compounds to ionic and/or polar compounds SA: strongly acidic cation exchanger based on silica with benzene­sulfonic acid modification for removal of ionic…

Weak Anion Exchange Exhibits both anion exchange and reversed phase behavior Wide pH range: can be ionized or neutral depending on pH of buffer solution WAX resin retains acidic/anionic; neutral and strong acids Agilent SampliQ WAX is designed to retain and release strong…

Sep-Pak Alumina B Plus Long cartridges contain a highly active grade of alumina with a basic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Solid phase extraction apparatus uses glass vials or tubes for sample collection and concentration. Some sorbents require large desorption volume than small SPE cartridges in such case SPE tubes were used. Application: Supelclean(TM) ENVI-Carb(TM) SPE Tube was used in separating glycan moiety…

Supelclean(TM) LC-Si SPE tube is used to extract polar analytes from nonpolar samples. Application: Supelclean(TM) LC-Si SPE Tube may be used for the solid-phase extraction of: •Phospholipids in dairy products prior to their determination by high performance liquid chromatography-evaporative…

Special phase for drying organic samples Features Anhydrous high-purity sodium sulfate which forms Glauber’s salt with traces of water – For removal of larger quantities of water several cartridges can be combined in series. Recommended application: removal of traces of…

Propylsulfonic acid modified silica cation exchanger for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 propylsulfonic acid modified silica very strong cation exchanger (capacity ~ 0.7 meq/g) …

Ideal for Flash separations from 10 mg up to 300 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…

Supelclean(TM) LC-Si SPE Tube is used to adsorb moderately polar to polar compounds from nonaqueous samples. Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC

Cyanopropyl modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 cyanopropyl phase, carbon content 5.5 %, polar to mid-polar In addition to weak hydrophobic interactions…

Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC

Retention Mechanism: Reversed-phaseSample Matrix Compatibility: Aqueous solutions (drinking, ground, waste water) •Polymerically bonded, octadecyl (17% C), endcapped •Excellent for cleaning, extracting and concentrating pollutants from aqueous environmental samples •Higher 17% C loading for…

Mixed-mode strong cation exchange columns for basic analyte extraction High surface area and capacity ensure highly reliable retention characteristics No secondary interactions from silanol groups for accurate results Higher sample loading due to high surface area Recover clean…

HybridSPE-Phospholipid technology is a simple and generic sample prep platform designed for the gross level removal of endogenous protein and phospholipid interferences from biological plasma and serum prior to LC-MS or LC-MS/MS analysis. Biological plasma or serum is first subjected to protein…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Use to close Luer port. Polypropylene. Synonyms: Luer Plugs & Caps

Solid phase extraction apparatus uses glass vials or tubes for sample collection and concentration. Some sorbents require large desorption volume than small SPE cartridges in such case SPE tubes were used. Application: Empty polypropylene SPE tube with PE frits was used in preparing…

Choose from three different sizes of Surety® Columns for a wide range of capacities. Specifically designed for the use of removing fibrin and macro particles from serum to prevent line clogging. Columns have integral caps that fit directly onto sample cups. Columns may be used…

Connecting kits for CHROMABOND® Flash columns CHROMABOND® Flash Starter Kit consists of: 1/8" PTFE tubing, ID 1.5 mm, length 3 m; 5 x 1/4"-28 PP nuts; 5 x 1/8" ETFE ferrules; 5 x 1/4"-28 nylon unions; 2 x 1/4"-28 PP luer locks female; 1 x 1/4"-28 PP luer…

Dispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…

Supelclean(TM) LC-Si SPE Tube is used to adsorb moderately polar to polar compounds from nonaqueous samples. Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC

Retention Mechanism: Normal phaseSample Matrix Compatibility: Organic solvents, oils, and lipids •Unbonded acid washed silica sorbent ideal for normal phase SPE and other modified flash techniques •Often used to separate or remove structurally similar molecules through successive elutions with…

HybridSPE-Phospholipid technology is a simple and generic sample prep platform designed for the gross level removal of endogenous protein and phospholipid interferences from biological plasma and serum prior to LC-MS or LC-MS/MS analysis. Biological plasma or serum is first subjected to protein…

Ensures fast, reliable extraction of anionic compounds Inert to a wide variety of solvents Stable for pH ranges 0 - 14 Water-wettable The Agilent SampliQ Strong Anion Exchange (SAX) polymeric resin is a mixed-mode, tertiary amine-modified divinyl benzene polymer that…

Sep-Pak Accell Plus QMA Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of…

Supelclean(TM) LC-Si SPE Tube is used to adsorb moderately polar to polar compounds from nonaqueous samples. Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC

Includes: 100 Units

Dispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…