SPE Columns
-
CHROMABOND® C18 Hydra
MACHEREY-NAGELOctadecyl modified silica phase for SPE of polar analytes Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Special octadecyl phase for polar analytes, not endcapped, carbon content 15 % Recommended…
-
Empore(TM) SPE Disks matrix active group C18
MilliporeSigmaEmpore membrane SPE technology comprises of SPE particles tightly enmeshed within a network of inert PTFE fibrils (90% SPE particles : 10% PTFE, by weight). The SPE-membrane fabrication process results in a highly dense and uniform extraction medium that offers distinct advantages over traditional…
-
CHROMABOND® SiOH-H2SO4/SA
MACHEREY-NAGELCombination phase for SPE analysis of PCBs Features SiOH-H2SO4: H2SO4-impregnated silica phase for oxidation of accompanying compounds to ionic and/or polar compounds SA: strongly acidic cation exchanger based on silica with benzenesulfonic acid modification for removal of ionic…
-
CHROMABOND® C18
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
Affinimip SPE is a selective solid phase extraction based upon molecularly printed polymers (MIP). It combines the advantages of Immune-affinity columns in terms of selectivity and a classic solid phase extraction (SPE) in terms of robustness and costs. This selectivity and robustness combines to…
-
CHROMABOND® C8
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
Supelclean(TM) LC-18 SPE Tube
MilliporeSigmaLegal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC
-
Supelclean(TM) ENVI(TM)-18 SPE Tube
MilliporeSigmaRetention Mechanism: Reversed-phaseSample Matrix Compatibility: Aqueous solutions (drinking, ground, waste water) •Polymerically bonded, octadecyl (17% C), endcapped •Excellent for cleaning, extracting and concentrating pollutants from aqueous environmental samples •Higher 17% C loading for…
-
SampliQ Silica C18 ODS SPE Cartridges
Agilent TechnologiesReversed Phase (Non-Polar) 24% carbon loading Silica-based particles reduce pressure drop and increase flow reproducibility Average particle size of 45 µm and pore diameter of 60 Angstrom to reduce pressure drop and increase flow reproducibility Agilent’s…
-
TELOS® neo™ PRP SPE Columns
KinesisNonpolar SPE columns for acidic, neutral, and basic analyte extraction High surface area and capacity ensure highly reliable retention characteristics No secondary interactions from silanol groups for accurate results Higher sample loading due to high surface area Recover clean…
-
SampliQ Polymer SCX SPE Cartridges
Agilent TechnologiesIdeal solid phase extraction for melamine analysis Ensures fast, reliable extraction of basic and cationic compounds Resistant to a wide variety of solvents Stable for pH ranges 0 - 14 Water-wettable Agilent's mixed-mode SampliQ SCX polymeric resin is a…
-
Populate base plate with only the wells needed 50 µL elution volume for minimal sample dilution and reduced evaporation time Optimized well geometry for 5 and 10 mg sorbent masses Use with vacuum or positive pressure The internal diameter, frit design, and sorbent material of…
-
Supelclean(TM) ENVI-Carb(TM) SPE Tube
MilliporeSigmaSolid phase extraction apparatus uses glass vials or tubes for sample collection and concentration. Some sorbents require large desorption volume than small SPE cartridges in such case SPE tubes were used. Application: Supelclean(TM) ENVI-Carb(TM) SPE Tube was used in separating glycan moiety…
-
BAKERBOND® Speedisk Extraction Columns
Avantor - J.T.Baker®With Speedisk columns, you can choose the column that works best with your sample size and performance requirements. Patented laminar configuration: reduces run time, increases capacity, eliminates filtration and evaporation steps Columns fit into all popular processors and racks …
-
HybridSPE®-Phospholipid 96-Well Essentials Kit
MilliporeSigmaHybridSPE-Phospholipid technology is a simple and generic sample prep platform designed for the gross level removal of endogenous protein and phospholipid interferences from biological plasma and serum prior to LC-MS or LC-MS/MS analysis. Biological plasma or serum is first subjected to protein…
-
SampliQ Polymer OPT SPE Cartridges
Agilent TechnologiesMost versatile SPE option Reversed phase retention mechanism simplifies method development and compatibility for both GC and LC separations Unlike silica-based phases, OPT cartridges yield the same exacting results if they inadvertently dry out during the conditioning stage …
-
Supelclean(TM) LC-Si SPE Tube
MilliporeSigmaSupelclean(TM) LC-Si SPE Tube is used to adsorb moderately polar to polar compounds from nonaqueous samples. Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC
-
Supelclean(TM) ENVI-Carb(TM) SPE Tube
MilliporeSigmaGraphitized Non-Porous Carbon Retention Mechanism: Reversed-phase Sample Matrix Compatibility: Aqueous solutions (drinking, ground, waste water) •Surface area: 100m2/g; Particle Sz.:120/400 mesh •Extreme affinity for organic polar and non-polar compounds from both non-polar and polar matrices…
-
SampliQ Silica SPE Cartridges
Agilent TechnologiesNormal Phase (Polar) Average particle size of 45 µm and pore diameter of 60Å to reduce pressure drop and increase flow reproducibility Agilent’s trifunctional bonding process provides more stability over monomeric bonding Manufactured to Agilent’s rigorous…
-
CHROMABOND® HR-XAW
MACHEREY-NAGELWeakly basic secondary and tertiary ammonium polymeric anion exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 55–65 Å, particle sizes 45 µm or 85 µm (standard) very large specific surface 850 m2/g, pore volume 1.2–1.4 cm3/g, pH…
-
CHROMABOND® HR-XA
MACHEREY-NAGELStrong quat. ammonium modified polymeric anion exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 55–65 Å, particle sizes 45 µm or 85 µm (standard) very large specific surface 850 m2/g, pore volume 1.4 cm3/g, pH stability 1–14 …
-
CHROMABOND® Flash RS SiOH Cartridges
MACHEREY-NAGELIdeal for Flash separations from 10 mg up to 300 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…
-
Supel(TM) QuE Verde Tube
MilliporeSigmaDispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…
-
Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids…
-
BAKERBOND spe™ Disposable Extraction Columns
Avantor - J.T.Baker®Baker Disposable, Pre-Packed Extraction Columns Polypropylene extraction columns prepacked with sorbent Packing is held between two 20 mm polyethylene frits Sorbent weight ranges from 100 to 1000 mg and column reservoir capacity is 1, 3 or 6 mL, as indicated in listings below …
-
CHROMABOND® HR-XCW
MACHEREY-NAGELWeak carboxylic acid modified polymeric cation exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 50–60 Å, particle sizes 45 µm or 85 µm (standard), very large specific surface 850 m2/g, pore volume 1.2–1.4 cm3/g, pH stability…
-
Empty polypropylene SPE Tube with PE frits
MilliporeSigmaSolid phase extraction apparatus uses glass vials or tubes for sample collection and concentration. Some sorbents require large desorption volume than small SPE cartridges in such case SPE tubes were used. Application: Empty polypropylene SPE tube with PE frits was used in preparing…
-
CHROMABOND® PA
MACHEREY-NAGELCHROMABOND® SPE products Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special…
-
CHROMABOND® C6H5
MACHEREY-NAGELPhenyl-modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Phenyl phase, carbon content 8 %, polarity similar to C8 In addition to hydrophobic interactions more selective…
-
SPE columns, CHROMABOND WAX
MACHEREY-NAGELPS/DVB copolymer with secondary and tertiary ammonium modification for mixed-mode SPE with weak anion exchange and reversed-phase properties (WAX). Exchange capacity ≥ 0.8 meq/g, pKa 6 + 9. High-purity material with ideal flow properties and highest reproducibility. Allows highest…
-
Affinimip SPE is a selective solid phase extraction based upon molecularly printed polymers (MIP). It combines the advantages of Immune-affinity columns in terms of selectivity and a classic solid phase extraction (SPE) in terms of robustness and costs. This selectivity and robustness combines to…
-
Oasis® HLB Vac Cartridges
WatersThe 3 cc Oasis HLB cartridges contain the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent that was developed for the extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. Since the Oasis HLB sorbent is…