Centrifuges, Equipment, Centrifuge Accessories
-
Multiple swing-out and angle rotor options make the Z400 series centrifuges useful for a wide range of applications from molecular and cellular biology to microplate technology and blood separations.The microprocessor based controls are designed for quick and easy programming. Parameters are set…
-
Labnet Tank Assembly
LabnetThe Labnet tank assembly is made of durable materials and meet all your laboratory requirements.
-
-
Data Collection Options for Sorvall BIOS Centrfuges
Thermo Scientific SorvallCentri-Log Plus data collection software is a protocol-tracking solution that enables life cycle management of processed samples, equipment optimization, and compliance with standard operating procedures. Connect and track multiple centrifuges on the same network. Improve traceability with…
-
-
Lid For 30 x 2 mL A-T Rotor (5804/10)
EppendorfFits rotor FA-45-30-11 High-quality, extremely robust aluminum lid for both rotors Aerosol-tight Autoclavable (121 degrees C, 20 minutes) Centrifugation possible with rotor FA-45-30-11
-
Rotor Key
EppendorfA rotor key that is used with Eppendorf Centrifuges. This items fits Eppendorf models 5417 C/R, 5418/R, 5424/R, 5430/R, and 5702/R/RH. Accessory item for Eppendorf Centrifuges Size: 5mm Can be used with Eppendorf Captain Eppi rotor key holder
-
-
Rotor for 12 x 15ml Test Tubes (PrepSpin Centrifuge) Maximum volume of applied test tubes: 15 ml. Maximum sizes of the applied test tubes: (D x L) 16.8 x 140mm. Top speed: 3500 rpm.
-
Super High-Capacity Swing Bucket Rotor
EppendorfFor Eppendorf multi-purpose centrifuge models 5810 and 5810R Maximum capacity 4 x 400 mL Maximum speed 4,000 rpm Variety of adapters and capacities available Super high-capacity swing bucket rotor with wide speed range and choice of rotors provides maximum application versatility…
-
Labnet Motor Board Assembly
LabnetThe Labnet motor board assembly is highly efficient and easy to use.
-
Holder Centrifuge Tube 15ml
Glas-ColThe centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate. Each holder accommodates up to eight 15 mL glass tubes of up to 16 mm diameter, 126-160 mm long (stoppered) Up to 2 holders can be shaken at once Load Capacity:…
-
These Eppendorf A-4-62 rectangular replacement buckets for swing-bucket rotors are used with centrifuge models 5810 or 5810 R. Packaged in sets of four Autoclavable at 121 degrees C for up to 20 minutes Bucket Capacity: 250 mL This set of replacement buckets is an accessory…
-
-
Swing Out Rotor Accessories
Thermo ScientificThe Thermo Scientific accessory is mainly used with swing-out rotors or centrifuge models.
-
Accepts two 8-tube PCR strips or 16 0.2 mL tubes Snaps onto the standard 18-place rotor Max. speed: 14,000 rpm/9,400 x g Adapter is easily removed and replaced with one hand and is ideal for quick spins.
-
Accessories for Heraeus Megafuge 8 Centrifuge
Thermo ScientificTX-150 rotor accommodates a wide range of clinical and research applications, up to 24 x 5/7mL blood collection tubes or 8 x 50mL conical tubes at 4,500rpm/ 3,260 x g, and further flexbility for swing-out processing needs with available adapters. TX-100S clinical rotor includes sealed carriers…
-
-
-
Sprout® Portable Centrifugation Kit
Heathrow ScientificSpin Samples On-the-Go The Portable Centrifuge Kit by Heathrow Scientific offers a convenient way to spin down and prepare samples outside of a conventional laboratory environment. The centrifuge kit enables the processing of samples before deterioration can take place and can be used in…
-
-
Rotor FA-6x250
EppendorfFixed-angle rotor for up to 6 x 250 mL bottles 1 Ideal for the pelleting of microorganisms and mammalian cells 12 different adapters for broad range of additional applications Max. speed 15,054xg (10,100 rpm) Eppendorf QuickLock rotor lid for fast lid locking Aerosol-tight 2 for…
-
M-20 Microplate Rotor Package
Thermo ScientificCentrifuge up to 6 microplates. Includes: Two buckets, two adapters Capacity: 2 x 3 Standard, 2 x 1 Deepwell plates Max. speed/RCF: 4000rpm/2272xG
-
-
For use with FA-45-24-11 fixed-angle rotor. Accessory for Eppendorf personal microcentrifuges MiniSpin and MiniSpin Plus Adapter for 0.5mL microcentrifuge tubes and 0.6mL microtainers
-
Fixed-Angle Rotors
Thermo Scientific1227M77: Thermo Scientific 8 x 50mL Fixed-Angle Rotor is ideal for high-risk applications.
-
For 5804, 5804 R, 5810 and 5810 R Eppendorf Multipurpose centrifuges PCR strip rotor serves all models New rotors expand the versatility of the 5800 series For a variety of applications and capacities PCR TUBE STRIP ROTOR (For models 5804, 5804 R, 5810, 5810 R) spins 6 x 8 PCR…
-
-
Nalgene Polycarbonate Centrifuge Bottles
Thermo Scientific NalgenePolycarbonate bottles RCF to 27,500 x g Withstand temperatures of -135° to +135°C Round bottoms Autoclavable (autoclaving shortens bottle life). Include 38 mm polypropylene caps. Dimensions (o.d. x H, mm): 61.7 x 136.
-
Adapter 1 X 25ml A-4-38 Pk2
EppendorfAccessory for use with Eppendorf® centrifuge, model 5702. Round bucket centrifuge tube adapter for 25 mL tubes, round bottom for use with rotor model A-4-38. Pack of 2
-
Rotor for high-speed centrifugation of tubes up to 50 ml Aerosol-tight rotor lid for all applications involving hazardous samples Maximum speed: 16,639 x g (11,000 rpm) or 20,130 x g (12,100 rpm) when used in Model 5810 R Rotor features a unique “quick-lock” closure for fast and…
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)