TX-150 rotor accommodates a wide range of clinical and research applications, up to 24 x 5/7mL blood collection tubes or 8 x 50mL conical tubes at 4,500rpm/ 3,260 x g, and further flexbility for swing-out processing needs with available adapters. TX-100S clinical rotor includes sealed carriers…

High-density Polyethylene bottles RCF to 8,000 x g Withstand temperatures to -100°C Flat bottoms HDPE bottles are for use with refrigerated centrifuges. Bottles include 43 mm polypropylene screw caps. Dimensions (o.d. x H, mm): 61 x 128.

Swinging-bucket centrifuge rotors feature a full pathlength, slow run time, and excellent resolution. The swinging bucket rotor allows the tube to change angle during the run. The buckets are vertical when stopped and horizontal when running. The parallel geometry of the swinging buckets allow…

Spin Samples On-the-Go The Portable Centrifuge Kit by Heathrow Scientific offers a convenient way to spin down and prepare samples outside of a conventional laboratory environment. The centrifuge kit enables the processing of samples before deterioration can take place and can be used in…

The Slide Spinner is perfectly designed for drying microarray slides prior to scanning. Superior Scanning Results Prior to scanning a microarray slide, it is necessary to remove all wash buffer. This drying step is critical to obtain the best possible scanning results. Labnet's new…

Polycarbonate bottles RCF to 27,500 x g Withstand temperatures of -135° to +135°C Round bottoms Autoclavable (autoclaving shortens bottle life). Include 38 mm polypropylene caps. Dimensions (o.d. x H, mm): 61.7 x 136.

Floating microtube racks are ideal for thawing, cooling, or incubating samples in water or ice baths at a wide range of temperatures from -70C to 100C.  Tubes are supported below the lip while conical ends are immersed in water.  Racks feature a handle for easy removal from water bath as…

Maximum speed: 3,486 x g (4,500 rpm) For use in Models 5810 and 5810 R only Rotor can handle up to – 2 x 5 MTP – 2 x 4 Cell culture plates – 2 x 2 DWP – 2 x 1 Filtration plate kits Maximum loading height of 60 mm Aerosol-tight lids2 for all applications involving…

Multiple swing-out and angle rotor options make the Z400 series centrifuges useful for a wide range of applications from molecular and cellular biology to microplate technology and blood separations.The microprocessor based controls are designed for quick and easy programming. Parameters are set…

Accepts two 8-tube PCR strips or 16 0.2 mL tubes Snaps onto the standard 18-place rotor Max. speed: 14,000 rpm/9,400 x g Adapter is easily removed and replaced with one hand and is ideal for quick spins.

This Eppendorf 0.2 mL adapter is for all fixed-angle rotors for PCR and reaction tubes PCR tube size: 0.2 mL; diameter of adapter bore: 6mm Bottom of Form 7.4cm Rotor radius Adapter is autoclavable (121 degrees C, 20 minutes) 0.2 mL tube size

Conical bottom bottles RCF 27,500 x g Withstand temperatures of -40° to +121°C Autoclavable bottles include 58 mm polypropylene sealing caps and retained silicone gaskets. Dimensions (o.d. x H, mm): 61.5 x 140.

For use with FA-45-24-11 fixed-angle rotor. Accessory for Eppendorf personal microcentrifuges MiniSpin and MiniSpin Plus Adapter for 0.5mL microcentrifuge tubes and 0.6mL microtainers

Safely spin frequently-used tubes up to 7164 x g under sealed conditions using Thermo Scientific™ BIOShield™ 1000A Swinging-Bucket Rotor. Includes: Rotor body, windshield, buckets, sealing lid and rotor manual Compatible with: Thermo Scientific™ Sorvall™…

Adapter for 4x 30-50mL tubes (31mm diameter), for use in 4x500mL swing-bucket rotor (A-4-81) with round buckets; for Eppendorf Centrifuges 5810/5810R.

Fixed-angle rotor for use with Thermo Scientific Sorvall Legend X1, X3, Sorvall ST 40, Heraeus Multifuge X1, X3, Heraeus Megafuge 40, SL40 centrifuges. Maximal rotor capacity: 48 x 2 mL Reduces run-times with higher G-forces achieved with lightweight carbon fiber rotors Ensures…

Increase lab productivity with the Thermo Scientific™ TX-750 4 x 750mL Swinging Bucket Rotor, delivering maximum flexibility at 4700rpm. Buckets, lids and microplate carriers are sold separately; order TX-750 rotor body (75003180) and components to complete assembly. Tube adapters are…

Rotor for high-speed centrifugation of tubes up to 50 ml Aerosol-tight rotor lid for all applications involving hazardous samples Maximum speed: 16,639 x g (11,000 rpm) or 20,130 x g (12,100 rpm) when used in Model 5810 R Rotor features a unique “quick-lock” closure for fast and…

Thomas Nos. 1209Q14 – 1209Q16 Tube is 8" Marked in mL and can be used with our Oil Test Centrifuge with Long Cone Rotor in conformance with D91, D96, D893, D1796, D4007 Thomas No. 1209Q17 Tube is 8" Marked in mL and can be used with our Oil Test Centrifuge with Long Cone…

Fixed-angle Rotor F-45-24-11 for Centrifuges 5702 or 5702 R or 5702 RH Maximum rcf: 1,770 x g (4,400 rpm) Low-noise centrifugation without rotor lid  Centrifugation of 1.5 mL and 2 mL Eppendorf Tubes® Adapter for: 0.2 mL PCR tubes, 0.4 mL centrifuge tubes, 0.5 mL micro test…

Thomas No. 1203T19 RevSpin rotor replacement for RS-102, RS-150, RS-200. Standard (1.5mL or 2.0mL) 16 tube laminal rotor. Thomas No. 1203T20 RevSpin PCR strip rotor (0.2ml) replacement for RS-102, RS-150, RS-200.