Buffers, 1 kg, Chemicals

Compare Tool

Select up to 3 products

1 - 32 of 51
Sort
View
Show
  • Sodium phosphate monobasic is a reagent with very high buffering capacity widely used in molecular biology, biochemistry and chromatography. Useful in conjunction with Sodium Dibasic Phosphate, in the preparation of biological buffers. Used in many applications including the purification of antibodies.

  • MP Biomedicals

    Sodium dibasic anhydrous is used as a sequestrant, emulsifier and buffer in foods, as mordant in dyeing for weighting silk, in tanning, in manufacturing of enamels, ceramics, detergents, boiler compounds; as fireproofing agent in soldering and brazing instead of borax; as reagent and buffer in…

  • MP Biomedicals

    MOPS is used as a biological buffer. MOPS is a zwitterionic amino acid which acts as one of the "Good" buffers. It is a structural analog to MES; however, MOPS is a more suitable biological buffer than MES because the pH range is closer to pH 7.4. A buffer using MOPS sodium salt can be…

  • Triethanolamine is a zwitterionic buffer. Triethanolamine(TEA) is used primarily as an emulsifier and surfactant. It neutralizes fatty acids, adjusts and buffers the pH, and solubilises oils and other ingredients that are not completely soluble in water. Triethanolamine is also used as organic…

  • Spectrum Chemical

    CAS No.: 29915-38-6

  • MP Biomedicals

    HEPPS is used as a separator in ultrathin isoelectric focusing gels; enhances the resolution of phosphoglucomutase. HEPES is widely used in cell culture, largely because it is better at maintaining physiological pH despite changes in carbon dioxide concentration (produced by cellular respiration).

  • MP Biomedicals

    Tris have been useful as buffers in a wide variety of biological systems. It has been used as a starting material for polymers, oxazolones (with carboxylic acids) and oxazolidines (with aldehydes). It does not precipitate calcium salts and is of value in maintaining solubility of manganese salts.…

  • MP Biomedicals

    Borax is a salt of boric acid which is used as a buffer. It has a co-complexing ability with other agents in water to form complex ions with various substances. It is also commonly utilized in chromatography and electrophoresis studies. Borax is typically used as a buffer component,…

  • MP Biomedicals

    Sodium acetate is the sodium salt of acetic acid. Sodium acetate is used as a buffer in the buffering range of pH 3.6-5.6. It is also used in the purification and precipitation of nucleic acids, protein crystallization, Staining of gels in protein gel electrophoresis, HPLC, mordant dyeing, DNA…

  • Tris-HCl is excellent biochemical and biological buffer for all applications where ultra high purity is required. The pH values of all buffers are temperature and concentration dependent. For Tris buffers, pH increases about 0.03 unit per °C decrease in temperature, and decreases 0.03-0.05 unit per…

  • G-Biosciences

    Features   Synonym: 2-Amino-2-(hydroxymethyl)-1,3-propanediol, THAM, Tris base, Tris(hydroxymethyl)aminomethane, Trometamol Linear Formula: NH2C(CH2OH)3 Molecular Weight: 121.14 CAS Number: 77-86-1

  • MP Biomedicals

    HEPES is a zwitterionic organic chemical buffering agent; one of the twelve Good's buffers. HEPES has been utilized extensively for research and commercial applications in the cell culture and tissue culture industries. HEPES is widely used in cell culture, largely because it is better at…

  • Tris-HCl is an excellent biochemical and biological buffer for all applications where ultra high purity is required. The pH values of all buffers are temperature and concentration dependent. For Tris buffers, pH increases about 0.03 unit per °C decrease in temperature, and decreases 0.03-0.05…

  • Spectrum Chemical

    CAS No.: 7365-82-4

  • MP Biomedicals

    Bis-Tris is a zwitterionic buffer; an amine buffer similar to Tris Hydrochloric acid that exhibits only a very small shift in dissociation constant with respect to temperature. It is structurally analogous to the the Good buffers that were developed to provide buffers in the pH range of 6.15 - 8.35…

  • G-Biosciences

    Features Synonym: Acetic acid sodium salt CAS#: 127-09-3 Molecular Formula: C2H3O2Na Molecular Weight: 82.03

  • Spectrum Chemical

    CAS No.: 7365-45-9

  • BeanTown Chemical

    CAS: 150-25-4 EC No: 205-755-1 MDL No: MFCD00004295 RTECS: MB9700000 Powder Molecular Formula: C6H13NO4 MW: 163.17

  • Spectrum Chemical

    CAS No.: 5625-37-6

  • Spectrum Chemical

    CAS No.: 16052-06-5

  • Spectrum Chemical

    CAS No.: 1132-61-2

  • MP Biomedicals

    Tris have been useful as buffers in a wide variety of biological systems. It has been used as a starting material for polymers, oxazolones (with carboxylic acids) and oxazolidines (with aldehydes). It does not precipitate calcium salts and is of value in maintaining solubility of manganese salts.…

  • Spectrum Chemical

    CAS No.: 150-25-4

  • MP Biomedicals

    Tricine, a zwitterionic buffer, was first prepared by Good for use as a buffer for chloroplast reactions. It is structurally similar to Tris, but is much less inhibitory at high concentrations. The name tricine comes from tris and glycine from which it was derived. Tricine can be used in…

  • Agar is a polysaccharide complex extracted by bleaching and hot water treatment of agarocytes from the red alga Rhodophyceae, and usually consisting of the genera Gelidium, Acanthopeltis, Ceramium,Pterocladia and Gracilaria. The algae are typically found in the Pacific and Indian Oceans and in the…

  • Features   Synonym: Monopotassium phosphate CAS#: 7778-77-0 Molecular Formula: KH2PO4 Molecular Weight: 136.09

  • CAS: 1185-53-1 EC No: 214-684-5 MDL No: MFCD00012590 Solid Molecular Formula: C4H11NO3·HCl MW: 157.90 Melting Point: 150-152° Density (g/mL): 1.05

  • Features   Synonym: Disodium hydrogen phosphate CAS#: 7558-79-4 Molecular Formula: Na2HPO4 Molecular Weight: 231-448-7

  • G-Biosciences

      Features       Synonym: Tris(hydroxymethyl)aminomethanehydrochloride CAS#: 1185-53-1 Molecular Formula: C4H11NO3 · HCl Molecular Weight: 157.6    

  • CAS: 77-86-1 EC No: 201-064-4 MDL No: MFCD00004679 RTECS: TY2900000 Crystalline Molecular Formula: C4H11NO3 MW: 121.14 Melting Point: 169° Boiling Point: 288° (decomposes below boiling point) Density (g/mL): 1.353

  • G-Biosciences

    Features Synonym: Natron CAS#: 144-55-8 Molecular Formula: NaHCO3 Molecular Weight: 84.01

  • Potassium phosphate is a reagent with high buffering capacity. It occurs in several forms: monobasic, dibasic, and tribasic (K3PO4). Most pH neutral potassium phosphate buffer solutions consist of mixtures of the monobasic and dibasic forms to varying degrees, depending on the desired pH. …

Compare Tool

Select up to 3 products