500 mL, Supplies, Corning
-
PYREX Graduated Cylinder
CorningLifetime Red™ Graduated Cylinders Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard…
-
Featuring PYREXplus® protective PVC safety coating May be autoclaved or microwaved to 121°C (250°F) Resistant to thermal shock Similar to 1744F31 series. Borosilicate glass safety bottles provide good optical clarity and are mechanically durable. Can be marked with either…
-
Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains the mechanical strength, chemical stability and thermal resistance of PYREX brand hardware.
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
PYREX® VISTA™ Filtering Flasks
CorningMicro Filtering Flasks These PYREX® VISTA™ micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the…
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
These PYREX® wide mouth Erlenmeyer flasks are especially recommended for use as titration flasks and are designed with heavy duty rims to reduce chipping. For convenience, these flasks are graduated in durable white enamel to show the approximate capacity and have an extra large marking…
-
Solvent Still Head 500 ml
CorningThis 500mL capacity PYREX® solvent still head is used for maintaining oxygen free solvents. Head has sufficient storage space to allow solvent removal by syringe or drainage through 2mm T-bore PTFE stopcock It has a 24/40 Standard Taper outer joint at top, 24/40 Standard Taper inner…
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
Tall Form PYREX® Washing Bottles With fused-on fritted cylinder 12 mm diameter on inlet tube and with Standard Taper 29/42 joint. With glass hooks on both bottle and cap, but without springs. Offered in 250 and 500 mL capacities, in coarse (C) and extra coarse (EC) porosities. 250EC and…
-
These PYREX® Erlenmeyer flasks have heavy tooled rims for maximum durability. The same baffle design as found on PYREX® Delong flasks promotes optimal and consistent solution agitation when used with flask shakers. Their uniform wall thickness provides the proper balance between mechanical…
-
Iodine Flasks
CorningFor the determination of the iodine number of oils, fats and waxes by the Wijs and Hanus methods Flaring, funnel-shaped lip and Standard Taper 22 stopper
-
Heavy-duty rim for longer service Narrow mouth Graduated scale indicates approximate volume The Erlenmeyer design is extremely popular and has been modified for numerous lab applications.
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
PYREXPLUS® Filter Flask
CorningProtective PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
-
Flask 500 ml
CorningThese 500mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint.
-
These PYREX VISTA Class A graduated cylinders are calibrated either “to contain” (TC) or “to deliver” (TD), and have blue enamel graduations. The cylinder capacity is in accordance with ASTM E-1272. The 10mL size has a funnel top.
-
These PYREX® Class A graduated cylinders are calibrated "to Deliver" (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement…
-
Screened white enamel graduations Sterilized by gamma radiation Large white marking spot Break resistant polycarbonate material 45 mm size cap provide greater access for liquid transfer Bottles can be autoclaved once at 121°C and 15 psi Easy opening packaging Available in…
-
Baffles enhance aeration and agitation of contents of the flask. Unique impeller design ensures optimal stirring. Sidearm designs permit easy access of 25 mL and 50 mL pipets. Reusable Glass Spinner Flask is designed to improve cell growth by keeping the culture media moving and…
-
These Class A PYREX volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is…
-
These 10-250mL PYREX® graduated cylinders are calibrated “to contain” (TC) and are useful as a mixing cylinder. Graduations are in durable white enamel. Each features a PYREX® No. 13 Standard Taper stopper. Approximate height does not include stopper. For replacement PYREX®…
-
Round bottom Short ring neck These PYREX® round bottom boiling flasks have short ring necks. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering…
-
These beakers are transluscent with a raised graduation scale. They feature high temperature and chemical resistance.
-
Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…
-
These PYREX® heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy…
-
Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock…
-
Corning PYREX® Kettles Designed for long life and maximum safety Wide mouth, which permits easy access to interior for cleaning Cover of heavy-pressed construction Lower sections are mold-blown for maximum resistance to mechanical breakage Offers a broad range of sizes …
-
Suitable for shaker culture applications Optically clear polycarbonate Sterilized by gamma irradiation Certified nonpyrogenic Certified RNase- and DNase-free Corning Baffled Erlenlenmeyer Flasks are for use in shaker culture applications. Models are available with vent caps…