Ideal for measuring inside diameter, outside diameter and depth Stainless steel or carbon fiber models Zero at any point Switch between inches and millimeters NIST traceable Thomas Traceable digital calipers take length/diameter measurements three ways: outside, inside and…

Triple display Adjustable volume Adjustable alarm duration Memory recall NIST traceable certificate User-friendly timer displays three different times simultaneously, counts down and alarms. Three different tests may be run at the same time using three line display. Channels can be started…

View giant size digits on your bench timer from across the lab. Visible from shelves, in hoods, or perched on instruments. Eliminates “squinting” to observe alarm time remaining. Giant-Digits with 1-1/3 inch digit height Viewable from 50 feet Countdown and alarms on single…

Pitot Tube measures Air Velocity/Airflow in difficult-to-reach or tight locations where a vane anemometer won't fit Simultaneous display of Pressure, Air Velocity or Air Flow plus Temperature ±0.7252psi range 5 selectable units of pressure measurement Max/Min/Avg recording and Relative time…

3 channels, plus memory Resolution is 1 second Accuracy is 0.01% Timing capacity: 99 hours, 59 minutes, 59 seconds to 1 second Clock is provided with an individually serial numbered Traceable® certificate from an ISO 17025 calibration laboratory accredited by A2LA. It indicates…

Set program in less than 5 seconds Two models Model 1 has an “on” interval setting of 0.01 to 99.99 seconds, 1 minute to 9999 minutes or 1 hour to 9999 hours. Model 2 has separate “on” and “off” interval settings of 1 second to 99 seconds, 1…

Used for blood cell and corpuscle counts or wherever double counting is required Two registers each registers to 9999 Large, rectangular pushbuttons and zero reset knob on both sides Pushbuttons for the two independent registers are color-coded, and both sides are reset simultaneously…

Automatically switch equipment on or off up to 14 times a day Get accurate, reliable measurements with included NIST-traceable calibration Provides daily and weekly on/off control. Plug into any three-prong outlet. Minimum switching interval is one minute; maximum is 168 minutes.…

Traceable Automatic memory reset Integrated magnet and clip Thomas timer counts down from 9999 minutes in one-minute increments. It has a countdown resolution of 1 second for times below 99 minutes.  Users can select an audible alarm or a bright flashing LED visual alarm with the…

2 channels, plus memory Timing capacity: 23 hours, 59 minutes, 59 seconds Resolution is 1 second Accuracy is 0.01% Clock is provided with an individually serial numbered Traceable® certificate from an ISO 17025 calibration laboratory accredited by A2LA. It indicates…

DC/AC Current True RMS Type K thermometer DC Zero Clamp-on multimeter with built-in non-contact InfraRed Thermometer Infared thermometer and rugged double molded housing Non-contact InfraRed Temperature measurements with laser pointer Peak hold captures inrush currents and Transients

Lightweight and disposable Sound confirmation every time a button is pressed NIST Traceable® Certificate supplied Accurate to 0.1% Ideal for easy-duty, occasional-use needs where high precision is not a requirement. Can be worn around the neck with the (included) 38” lanyard. Times to 24 hours…

A and C decibel frequency scales Fast or slow response Calibration Certification available Easy calibration using internal oscillation system AC or DC output and peak function Display has a resolution of 0.1 dB and indicates low battery and over/under load. Has a foldout tripod stand and…

Numbered keys for easy countdown timer setting Vivid LCD digits readable from 8 feet NIST Traceable® Certificate supplied Accurate to 0.01% The alarm timer stopwatch counts down with an alarm and counts up with a time-out feature. It can be programmed to count down from 99 minutes, 99 seconds…

Traceable® Digital Stopwatch ( 8788T52) Precise, Traceable® timing for enzyme tests, viscosity measurements, animal studies, and other timed lab tests. Made for scientists in industrial, educational, hospital, and governmental labs who insist on the finest instrumentation.…

Features three decibel ranges for greater precision Low decibel range: 35.0 to 80.0 dB; medium decibel range: 50.0 to 100.0 db; and high decibel range: 80.0 to 130.0 dB Resolution is 0.1 dB and accuracy is ±2 dB Unit provides weightings for both A and C frequencies to meet IEC 651 Type 2…

For rapid and accurate counting of multiple factors Wide steel base plate for desk or benchtop mounting Color-coded buttons All counters register to 999 Counters without totalizers offer inexpensive multiple counting

Lightweight and compact Wide measurement ranges Easy to operate Enviro Meter is four tools in one small and easy transportable hand-held unit. Anemometer, humidity meter, light meter and two thermometers all feature exceptional accuracy and reliability. Unit features a bright LCD…

6000 count LCD display Waterproof (IP67) rugged design for heavy duty use Rugged design — drop proof to 6 feet 1000V input protection on all functions Dual sensitivity frequency functions Dual sensitivity frequency functions Large backlit LCD with bargraph Duty Cycle function and Diode…

Consistent, reliable stirrer speed Digital display Glass ceramic top Conserves lab space Easy-to-use stirrers with digital displays indicate stir speed settings. Microprocessor-controlled feedback maintains consistent repeatable stir speed. Control automatically adjusts motor strength to…

Water-, dust-, and shock-resistant Separate start/stop and reset buttons Split-mode timing to freeze split-time display Accuracy is 5 sec/day 1.5 V battery LCD 0.375" H display 1 min beep alarm Includes: Neck cord (46" L), 1.5 V button…

3-in-1 combination meter Combines the functions of a Humidity Meter, Type K Thermometer, and InfraRed Thermometer for non-contact surface Temperature measurement Built-in InfraRed Thermometer for non-contact temperature measurement to 932°F (500°C) with 30:1 distance to target ratio Type K…

Display 7/8" x 3/8" to 00.00 Press “min” and “set” together to reset Press “start/stop” to start and again to stop Press any key to stop alarm “Recall” feature returns automatically to preset time Displays up to 99 minutes…

Fast, stable and accurate response Light Meter Lux 840006 Monitor light levels anywhere with fast, stable and accurate response. Results are easily read on t he extra large digits ( 7/8" high, 2 2mm) t hat also indicates w hen t he battery is low or the reading over range. The color and…

Waterproof pocket size with Air Velocity, Temperature and Windchill The 45118 is a Waterproof pocket sized Thermo-Anemometer for Air Velocity, Temperature and Wind-chill measurements. Simultaneously display Air Velocity and Temperature or Wind-chill on the LCD screen. Selectable averaging…

For blood cell, corpuscle, and blood platelet counts, bacteria colony work, etc. Registers to 9999 and two reset knobs permit quick resetting to zero

Easy to read LCD Counts to 99,999 Fail-safe reset Weighs only one ounce Each time a black mark is made with the felt-tipped pen, it automatically sounds a beep, and LCD displays the counts. Use it to count cell growth on petri dishes, inventory parts, and tally samples received. Touch, sound,…

Large 3/4” display 24-hour capability Adjustable volume alarm Bright red, flashing light; can be used w/o sound to signal end of cycle Unique start/stop button for easy access Unit counts down in second increments. Loud alarm and flashing light command…

Measures up to 1832ºF with 50 to 1 distance to target ratio Laser pointer to identify target area Highest 50 to 1 distance to target ratio measures smaller surface areas at greater distances Widest Temperature range from -58 to 1832ºF (-50 to 1000ºC) Adjustable high/low alarm alerts user…

NIST Traceable® Certificate supplied 6-digit 1/4” high LCD Convenient clip attaches timer to buttonhole, belt loop, notebook or keys Accurate to 0.01% The Traceable® Timer Plus is three timers in one: a countdown alarm timer, a stopwatch and a time-of-day clock. The…

Compact size Convenient portable size with wide temperature range measuring up to 1200°F (650°C) Adjustable High/Low setpoints with audible alarm alerts user when temperature exceeds the programmed setpoints Adjustable emissivity for better accuracy on different surfaces Built-in laser pointer…

Easy-to-learn operation NIST Traceable® Certificate supplied Quartz-crystal accuracy to 0.01% Ideal QC (quality control) countdown and alarm timer combines easy, three-button operation with giant-size digits. Times may be set up to 20 hours in any minute increment. At zero, a 1-minute alarm…