Digital

Compare Tool

Select up to 3 products

1 - 32 of 72
Sort
View
Show
  • quick-ship

    labForce® (powered by Thomas Scientific)

    View giant size digits on your bench timer from across the lab. Visible from shelves, in hoods, or perched on instruments. Eliminates “squinting” to observe alarm time remaining. Giant-Digits with 1-1/3 inch digit height Viewable from 50 feet Countdown and alarms on single…

  • quick-ship

    labForce® (powered by Thomas Scientific)

    Ideal for bench use LCD designed for viewing at any angle NIST Traceable® certificate supplied Easy to operate Extra-large keys Accurate to 0.01% Timer counts down from 24 hours to 1 second in second increments. Special memory allows programming an instant replay repeat time, which appears…

  • labForce® (powered by Thomas Scientific)

    Traceable Automatic memory reset Integrated magnet and clip Thomas timer counts down from 9999 minutes in one-minute increments. It has a countdown resolution of 1 second for times below 99 minutes.  Users can select an audible alarm or a bright flashing LED visual alarm with the…

  • quick-ship

    labForce® (powered by Thomas Scientific)

    Lightweight and disposable Sound confirmation every time a button is pressed NIST Traceable® Certificate supplied Accurate to 0.1% Ideal for easy-duty, occasional-use needs where high precision is not a requirement. Can be worn around the neck with the (included) 38” lanyard. Times to 24 hours…

  • Features three decibel ranges for greater precision Low decibel range: 35.0 to 80.0 dB; medium decibel range: 50.0 to 100.0 db; and high decibel range: 80.0 to 130.0 dB Resolution is 0.1 dB and accuracy is ±2 dB Unit provides weightings for both A and C frequencies to meet IEC 651 Type 2…

  • Large 3/4” display 24-hour capability Adjustable volume alarm Bright red, flashing light; can be used w/o sound to signal end of cycle Unique start/stop button for easy access Unit counts down in second increments. Loud alarm and flashing light command…

  • Set program in less than 5 seconds Two models Model 1 has an “on” interval setting of 0.01 to 99.99 seconds, 1 minute to 9999 minutes or 1 hour to 9999 hours. Model 2 has separate “on” and “off” interval settings of 1 second to 99 seconds, 1…

  • DC/AC Current True RMS Type K thermometer DC Zero Clamp-on multimeter with built-in non-contact InfraRed Thermometer Infared thermometer and rugged double molded housing Non-contact InfraRed Temperature measurements with laser pointer Peak hold captures inrush currents and Transients

  • quick-ship

    labForce® (powered by Thomas Scientific)

    Time three tests simultaneously with ease 3-line display with easy-to-read 1/2 digits NIST Traceable® Certificate supplied Accuracy of 0.01% Channel buttons Adjustable bench stand Sleek and streamlined case Time may be set from 19 hours, 59 minutes, 59 seconds to 1…

  • Traceable® Digital Stopwatch ( 8788T52) Precise, Traceable® timing for enzyme tests, viscosity measurements, animal studies, and other timed lab tests. Made for scientists in industrial, educational, hospital, and governmental labs who insist on the finest instrumentation.…

  • Ideal for measuring inside diameter, outside diameter and depth Stainless steel or carbon fiber models Zero at any point Switch between inches and millimeters NIST traceable Thomas Traceable digital calipers take length/diameter measurements three ways: outside, inside and…

  • For rapid and accurate counting of multiple factors Wide steel base plate for desk or benchtop mounting Color-coded buttons All counters register to 999 Counters without totalizers offer inexpensive multiple counting

  • quick-ship

    labForce® (powered by Thomas Scientific)

    Numbered keys for easy countdown timer setting Vivid LCD digits readable from 8 feet NIST Traceable® Certificate supplied Accurate to 0.01% The alarm timer stopwatch counts down with an alarm and counts up with a time-out feature. It can be programmed to count down from 99 minutes, 99 seconds…

  • quick-ship

    labForce® (powered by Thomas Scientific)

    Easy-to-learn operation NIST Traceable® Certificate supplied Quartz-crystal accuracy to 0.01% Ideal QC (quality control) countdown and alarm timer combines easy, three-button operation with giant-size digits. Times may be set up to 20 hours in any minute increment. At zero, a 1-minute alarm…

  • labForce® (powered by Thomas Scientific)

    NIST Traceable® Certificate supplied 3/8” LCD digits for easy viewing Accurate to 0.01% Times two tests at once Two-Memory Timer delivers on-the-dot timing operations, whether counting up or down from 23 hours, 59 minutes, 59 seconds. Timer can be used as a time-of-day…

  • labForce® (powered by Thomas Scientific)

    Air velocity ranges /resolution (see chart below for details) Accuracy is ±(1% full scale plus 1 digit) Temperature accuracy is ±0.8°C or 1.5°F Probe expands from 9 1/2 inches to 3 feet in length Features include minimum/maximum memory, data hold and Serial…

  • Waterproof (IP67) rugged design for heavy duty use CAT IV-600V safety rating for industrial applications 0.5% basic accuracy Over-sized high contrast 4000 count LCD backlit display 1000V input protection on all ranges Dual sensitivity frequency functions Relative Mode Data Hold and Auto…

  • Automatically stores up to 16,000 readings or manually store/recall up to 99 readings Wide range to 40,000Fc or 400,000 Lux Cosine and color corrected measurements Utilizes precision silicon photo diode and spectral response filter Peak mode (10µS) captures highest reading Relative mode…

  • For blood cell, corpuscle, and blood platelet counts, bacteria colony work, etc. Registers to 9999 and two reset knobs permit quick resetting to zero

  • labForce® (powered by Thomas Scientific)

    Detachable clip Accuracy: 0.001% Resolution: 0.01 second Timing capacity: 9 hours Timing functions include single-action, time in/out, continuous timing, cumulative split, interval split, 300 memories and repetitive programmable. Stopwatch is 3” x 2 1/2” x 7/8” and weighs 2.5…

  • Sper Scientific

    Ideal for multiple and simultaneous processes Two 1/100th second displays Counts up or down to 10 hours Available with NIST Traceable® certificate of compliance In stopwatch mode the current lap time is shown in the upper display, cumulative total in lower one. Memory stores last 8 lap times…

  • labForce® (powered by Thomas Scientific)

    Accuracy: 0.001% Resolution: 1 second Timing capacity: 9 hours Timing functions include single-action, time in/out, continuous timing, cumulative split, interval split, 60 memories and repetitive programmable. Stopwatch is 2 1/8” x 2 5/8” x 3/4” and weighs 2 ounces. Includes…

  • labForce® (powered by Thomas Scientific)

    Color correction filter Unit recalls highest, lowest and average readings Analog output for strip and chart recorders (0.1 millivolts per digit) Accuracy is ±(5% plus 2 digits) Ranges in Lux are 0 to 1999 (1 Lux resolution), 2000 to 19,900 (10 Lux resolution) and 20,000 to…

  • quick-ship

    labForce® (powered by Thomas Scientific)

    Triple display Adjustable volume Adjustable alarm duration Memory recall NIST traceable certificate User-friendly timer displays three different times simultaneously, counts down and alarms. Three different tests may be run at the same time using three line display. Channels can be started…

  • quick-ship

    labForce® (powered by Thomas Scientific)

    2 channels, plus memory Timing capacity: 23 hours, 59 minutes, 59 seconds Resolution is 1 second Accuracy is 0.01% Clock is provided with an individually serial numbered Traceable® certificate from an ISO 17025 calibration laboratory accredited by A2LA. It indicates…

  • quick-ship

    labForce® (powered by Thomas Scientific)

    Specifications Barometric pressure from 8.85 to 32.45 inHg with a resolution of 0.01 inHg 300 to 1100 mbar with a resolution of 1 mbar Accuracy is ±0.2363 inHg (±8 mbar) at tested points Altitude range –2296 to 29520 ft (–700 to 9000 meters ) with a…

  • quick-ship

    labForce® (powered by Thomas Scientific)

    Easy to read LCD Counts to 99,999 Fail-safe reset Weighs only one ounce Each time a black mark is made with the felt-tipped pen, it automatically sounds a beep, and LCD displays the counts. Use it to count cell growth on petri dishes, inventory parts, and tally samples received. Touch, sound,…

  • Pitot Tube measures Air Velocity/Airflow in difficult-to-reach or tight locations where a vane anemometer won't fit Simultaneous display of Pressure, Air Velocity or Air Flow plus Temperature ±0.7252psi range 5 selectable units of pressure measurement Max/Min/Avg recording and Relative time…

  • quick-ship

    labForce® (powered by Thomas Scientific)

    3 channels, plus memory Resolution is 1 second Accuracy is 0.01% Timing capacity: 99 hours, 59 minutes, 59 seconds to 1 second Clock is provided with an individually serial numbered Traceable® certificate from an ISO 17025 calibration laboratory accredited by A2LA. It indicates…

  • labForce® (powered by Thomas Scientific)

    Air velocity ranges resolution (see chart below) Accuracy is ±(2% + 1 digit) Temperature accuracy is ±1°C Data hold feature Wind vane is 2 3/4” in diameter, 2 1/2” long and has a cable length of 4 feet. Unit measures 6 1/4” x 3” x 1…

  • Automatically switch equipment on or off up to 14 times a day Get accurate, reliable measurements with included NIST-traceable calibration Provides daily and weekly on/off control. Plug into any three-prong outlet. Minimum switching interval is one minute; maximum is 168 minutes.…

  • Waterproof pocket size with Air Velocity, Temperature and Windchill The 45118 is a Waterproof pocket sized Thermo-Anemometer for Air Velocity, Temperature and Wind-chill measurements. Simultaneously display Air Velocity and Temperature or Wind-chill on the LCD screen. Selectable averaging…

Compare Tool

Select up to 3 products