Vacuum & Gas Manifolds
Explore our selection, which includes double vacuum manifolds, double vacuum/inert gas manifolds, air sampling manifolds, vacuum manifold accessories, gas manifolds, and drying assemblies. These advanced systems ensure seamless operations, allowing you to easily manage vacuum and gas processes.
In this category, you'll find trusted brands such as SP Wildmad-LabGlass, Kemtech America, Ace Glass, Chemglass, Advantec MFS, and Sartorius, each renowned for their quality and innovation.
Experience the manifold benefits of our vacuum & gas manifolds, including enhanced laboratory efficiency and seamless vacuum and gas handling. Whether you need a Schlenk manifold, a vacuum manifold, or a gas manifold, our collection offers the highest precision and flexibility for your lab's operations.
Elevate your lab's vacuum and gas handling capabilities with our products, which provide a reliable performance for your scientific endeavors.
-
Manifold, Tip-Off
Ace GlassUse to tip-off NMR tubes by inserting in lower Ace-Thred port and tightening via bushing. Vacuum line is connected to side hose connection. Tube is then tipped-off with flame. Aluminum shield helps retard heat transfer. Each port individually controlled by smooth acting, semi-needle, threaded PTFE…
-
SYNTHWARE Manifold with #15 O-Ring Joints
Kemtech AmericaWith 4mm double hollow high vacuum stopcocks. This four–port manifold is fitted with two 14/20 and 24/40 inner joints, and is 100mm center to center joints.#15 O-ring joint stopper (S480015) and #15 O-ring joint to serrated hose adapter have to be ordered separately. Viton® O-rings can be…
-
Microfil Filtration System
MilliporeSigmaMicrofil® system uses presterilized, ready-to-use funnels and mem/lianes on a patented filtration support, cost-effective. Convenient, easy to use system for well-accepted mem/liane filtration method conforms to international standards: CEN, Standard Methods, WHO Disposable,…
-
Vacuum Gauges, Analog, 1000-1 Microns
ChemglassEconomical thermocouple gauge has fast response and high stability. Gauge is supplied either in a bench top case with handle or panel mount style. Gauge utilizes a 8-pin Hastings-Raydist DV-6M thermocouple gauge tube having a 10ft cord. Gauge tube is threaded with 1/8 " male NPT for use with…
-
Vacuum Manifold Accessories
SartoriusAccessories for Combisart and Microsart Combi.jet Vacuum Manifolds.
-
SYNTHWARE Nitrogen/Argon Manifolds
Kemtech AmericaWith 14/20 outer joint at the center to fit a rubber septum for keeping syringes under an inert environment cutting down on the number used.
-
Walters Manifold
Ace GlassHign vacuum manifold systems feature Easy Action PTFE stopcock valves providing for greaseless operation. Double-tube codes -50 & -54 feature Ace-Threds and 8mm OD tube-end ports. Double tube code -52 features hose barbed connections and 45 degree port placement. Walters manifold, code -40,…
-
SYNTHWARE Vacuum Double Manifold with #15 O-Ring Joints
Kemtech AmericaVacuum Double Manifold, High Vacuum Valves, #15 O-Ring Joints: Ports: 4, Valve Size: 0-8mm
-
Sterility Test Manifold and Holders
MilliporeSigma3- and 6-place manifolds for sterility testing Stainless steel body, valves and filter supports
-
SYNTHWARE Vacuum Single Manifold with #15 O-Ring Joints
Kemtech AmericaVacuum Single Manifold, High Vacuum Valves, #15 O-Ring Joints: Ports: 4, Valve Size: 0-8mm
-
Replacement thermocouple gauge tubes for AF-0301-01, AF-0301-02 or AF-0303-01.
-
Patented screw-type valves within each SPE port for precise flow control Glass basin will not dissolve, fog, or discolor when exposed to solvents Legs on cover allow user to easily rest cover on work surface when removed from the manifold Screw-type solvent-resistant vacuum bleed gauge and…
-
Sterility Test Manifold
Advantec MFS1-place or 6-place Support cup accepts a No.8 or 8b stopper Features a flushing manifold Applications requiring a closed system, as in sterility testing, use the sterility test manifold. It features a rear-mounted flushing or rinse manifold pipe which allows liquid to be brought…
-
Gas Manifolds, 4-Place, Glass Stopcocks
ChemglassFour port manifold with 2mm bore glass stopcocks on the ports. A "T"-bore stopcock is located 100mm from the end of the manifold and 40mm from the first port. The distance between the other 3 ports is 50mm with the last port being 75mm from the opposite end of the manifold. The entire…
-
Aluminum Vacuum Manifolds
Dun-Rite MachiningThis aluminum manifold is lightweight and durable for easy handling in small work areas. While being easier to handle and less expensive than stainless steel, and still retaining the strength of alloy. Designed to be used in the vacuum filtration of liquids for analysis of microbiological or…
-
Stainless Steel Vacuum Manifold
Thermo Scientific NalgeneNalgene 345 Solid and stable on the bench top Designed with three vacuum outlets, each with leakproof, two-way valve and vent port Each outlet securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels…
-
Aluminum Funnel Filter Manifolds
Dun-Rite MachiningThis aluminum manifold is lightweight and durable for easy handling in small work areas. While being easier to handle and less expensive than stainless steel, and still retaining the strength of alloy. Designed to be used in the vacuum filtration of liquids for analysis of microbiological or…
-
Microsart 1, 2, 3, & 6-branch manifold for Microsart filtration units and funnels Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with Microsart base support for the use of Microsart Funnels or Microsart@filter, with venting filter and…
-
Visiprep™ SPE Manifold Replacement Solvent Guide Needles
MilliporeSigmaFor use with standard, 12- and 24-port models (optional use with 57030-U & 57250-U), stainless steel.
-
SYNTHWARE Double Manifolds, Hollow Glass Stopcocks
Kemtech America1164V90-V91 Double Manifold, Hollow Glass Stopcocks, Spherical Joints, 4 and 5 port manifold available, Joint Size: 35/20, Connections front-left right and rear-right, Overall Width: 365 and 450mm available. 1164V92 Double Manifold, Hollow Glass Stopcocks, Spherical Joints, Ports: 4, Joint…
-
Line has 5-ports with 4mm solid double oblique high vacuum stopcocks, CG-468-02, having a constant pressure retaining device, and 24/40 inner joints with hooks just above the grind. Ports are spaced 150mm center to center and have rod bracing to vacuum bank. Large ID of vacuum bank (40mm) provides…
-
Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Vac™ Chem-Cap® valves permit easy operation of manifold inside of a fume hood. Main ports are spaced 100mm center to center with an additional 2 ports on the upper bank that can be used for gauging…
-
Manifold, Vacuum
Ace GlassAll-glass-and-PTFE vacuum manifold with three, four or five stopcock ports. Each port is a variable opening, 0-10mm, high vacuum threaded stopcock. Plugs are PTFE with Nylon or PTFE handles and FETFE O-Rings. Ultimate vacuum of 10-7 can be realized with O-Rings as supplied. For bakable systems,…
-
Microsart 1, 3 & 6-branch manifold for Biosart 250 Funnels Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with Combisart base support for the use with Biosart 250 Funnels, with silicone tubing Pack size 1
-
Carb Octopus Air Sampling Manifold
Ace GlassThe vertically mounted Carb Octopus air sampling manifold design features an inner tube which allows condensation to drip to the collection bottle and away from the #7 Ace-Thred instrument ports. Available in standard 4 or 8 port configurations.
-
SYNTHWARE Double Manifold, High Vacuum Valve
Kemtech AmericaThis manifold is designed to incorporate a 0-8mm high vacuum valve as the vacuum shut-off. The front tube is for inert gases (17mm O.D.), with a 10mm hose connection. The rear tube is for vacuum (22mm O.D.), with two 35/20 socket joints. Please order each component separately.
-
Similar to the AF-0450 5-port line, except that the line is constructed using 0-4mm Chem-Vac™; Chem-Cap®; valves (A) instead of the CG-468-02 greased glass stopcocks on all of the 4-ports. The end cap on the vacuum line is a #30 o-ring joint while the inert gas line has a #9 o-ring joint…
-
SYNTHWARE Vacuum Manifolds, PTFE Stopcocks
Kemtech AmericaGeneral purpose manifold with 2mm or 4mm Teflon® stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.). Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 75mm.
-
Stainless Steel Extraction Manifold
Advantec MFS1-place, 3-place, or 6-place Tapered branch accepts 40/35 female joint Choice of 2- or 3- way valves Vacuum manifolds allow filtration of multiple samples either at once or independently by controling the separate branch valves. The durable type 304 stainless steel can be used for…
-
Drying Assembly, with Aluminum Holder
Ace GlassOriginally used for Lyophilizing and storing frozen slices of tissue for quantitative histochemistry (see O.H. Lowry, Journal of Histochem. & Cytochem., I, 420, 1953). More recently, used as a vacuum tube with aluminum holders by Nelson & Wakefield, Journal of Neuropathology & Exper. Neurology,…
-
Gas Manifolds, 4-Place, PTFE Stopcocks
ChemglassSimilar to CG-1814 but supplied with all PTFE stopcocks.