Sample Vials
We also have airtight sample vials. These vials are used to store and transport samples in a sealed and protected environment. Thanks to their design, airtight chemical storage containers prevent the entry of air, moisture, and other contaminants that may compromise the sample's integrity.
Following the correct storage wth airtight laboratory containers and handling of the vials, including labeling and sealing, will prevent contamination and loss of samples.
-
Autosampler Headspace Vials
ChemglassThese vials are manufactured from Type 1 Class A Borosilicate glass. The standard flat bottom vials can be used with Hewlett-Packard, Carlo Erba and Shimadzu. The European 20mm aluminum seal vials with rounded bottoms can be used in Perkin-Elmer, Tekmar, CTC/L.E.A.P.™ Technologies,…
-
Contaminants such as loose dirt, carton lint, aerosols, and fine glass particles are removed by the Vacuum and Ionization process. V & I Cleaning Process: Compressed air passes through a condensate separator and coalescing filter to remove aerosols and fine dust particles. …
-
Flip Top Polypropylene Vet Vials
Thermo Scientific NuncThermo Scientific™ Capitol Vial Flip-Top Vials are ideal for tissue sample transport between physician's office and laboratory. Made of high-clarity resin Store and transport small body fluid samples Handy pocket size vial for vitamins or pills Sterile Recommended for:…
-
These convenience packs come with 100 bonded closures and vials packed seperately. Closures with bonded septa are not attached.
-
Organic Series Vials
DWK Life Sciences (Wheaton)The Organic series consists of clear and amber glass vials with solid or open top closures. The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone septa assembled in the cap. The cap material is black…
-
-
Polypropylene Hinged Vials
QorpakLab grade polypropylene Hinged Vials are leak-proof and airtight. The containers are manufactured in FDA approved Class 10,00 and Class 100,000 clean rooms. The containers are physically closed in the mold as part of the manufacturing process in clean rooms using Hepa-Filtration systems,…
-
Low-Density Polyethylene Sample Vials
Thermo Scientific NalgeneSupplied with snap-on caps. Capacities with o.d. x height given below.
-
-
Flip Top Vial, Polypropylene, 8 oz, Standard Seal, Clear
Thermo Scientific Capitol VialThermo Scientific™ Capitol Vial Polypropylene Flip-Top Vials are ideal for storing and packaging a wide variety of liquids and solids. Ideal for economical storage or packaging of a wide range of liquids and solids 100% FDA compliant food grade polypropylene Aseptic, airtight…
-
Clear Glass 1.5mL High Recovery Vials
ChemglassWith a 40% larger opening, this vial is specifically designed to work in robotic arm auto samplers. They also incorporate the unique Step Vial design that precisely centers a limited volume insert in the neck of the vial.
-
Thomas Screw Cap Septum Vials
Thomas®Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10…
-
Superior quality 2D barcoded tubes to assist sample identification Designed for short or long term storage down to cryo temperatures Innovative manufacturing Our tubes are manufactured by a highly specialised and automated process, known as dual injection. This process creates a…
-
2.5 oz. Flip Top Polypropylene Vials
Thermo Scientific Capitol VialThermo Scientific™ Capitol Vial Polypropylene Flip-Top Vials are ideal for storing and packaging a wide variety of liquids and solids. Ideal for economical storage or packaging of a wide range of liquids and solids 100% FDA compliant food grade polypropylene Aseptic, airtight…
-
Amber Sample Vials, with Caps
ChemglassAmber sample vials packaged in convenient LAB-PACS of 144 pieces. Made from Type I borosolicated glass. Full height partitions minimize breakage. Solid PTFE lined caps. Open top caps with septa are available under part number CG-4910.
-
Flip Top Polypropylene Vials
Thermo Scientific Capitol VialThermo Scientific™ Capitol Vial Flip-Top Vials provide economical storage and packaging of a wide range of liquids and solids. Ideal for economical storage or packaging of a wide range of liquids and solids 100% FDA compliant food grade polypropylene Aseptic, airtight and leak…
-
Amber Screw Thread Vials with Unattached Closures
Chase ScientificVials and Phenolic Caps with White Rubber Liners Manufactured from amber 203 borosilicate glass Closed top black phenolic closures, unattached Closures supplied with PTFE-faced / white rubber liners
-
E-C Vials w / Rubber Lined Caps, Clear, 12 ml
DWK Life Sciences (Wheaton)These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…
-
Amber Sample Vials, without Caps
ChemglassAmber sample vials packaged in convenient LAB-PACS. Made from Type 1 borosilicate glass. Vials are conveniently packed in shrink-wrapped packs of 100. Caps sold separately.
-
2mL Wide Opening (9mm) Vials and Packs
Agilent TechnologiesAgilent provides high quality CrossLab 2mL Wide Opening (9 mm) Screw Top Vials and Packs with optional ceramic write-on spots. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor…
-
Single Dry Swab Only
Starplex ScientificDry swabs can be used for preserving and stabilizing nucleic acids for molecular diagnosis and also for assessing microbial presence on various surfaces and equipment.
-
Amber Screw Thread Vials with Unattached Closures
Chase ScientificVials and Phenolic Caps with PTFE-Faced / White Rubber Liners Manufactured from amber 203 borosilicate glass Closed top black phenolic closures, unattached Closures supplied with PTFE-faced / white rubber liners
-
40 mL Sample Vial In Lab File, Clr, No Cap
DWK Life Sciences (Wheaton)Clear and amber vials made from borosilicate glass Shorty Vials® feature a low profile for greater stability Screw caps available separately
-
Nextgen™ V-Vials, Clear Graduated Glass With Open Top Black Phenolic Caps
DWK Life Sciences (Wheaton)Clear graduated vials with open top black phenolic caps Teflon® faced silicone liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with solid and open top…
-
Screw Thread Sample Vials without Closures, Clear
Chase ScientificManufactured from clear KG-33 borosilicate glass Vials are packaged in corrugated trays with partitions
-
AlteTube™ Cap Carrier
AltemisLabAlteTube™Cap Carrier Screw caps in 96 or 48 SBS format For seamless automated capping of all internal & external thread AlteTubes in 96 or 48 SBS format Temperature range: -196°C to 121°C
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)