Our compact, pocket-sized moisture meter measures moisture content in wood and other building materials such as: sheetrock, drywall, wallboard, concrete, mortar, plaster, etc. This handy, compact moisture meter has a dual backlit LCD digital display for moisture & temperature. Displays temperature…

Wirelessly display, log, and transfer readings. Sper Scientific’s Bluetooth® Sound Meter is small, light, and simple to use with results clearly displayed on the meter’s large 1.5” backlit display. Choose A or C decibel frequency weighting scales and manual or auto ranging. Indicates readings over…

The Extech EX470A True RMS Multimeter and Infrared Thermometer with Capacitance, Frequency, and Duty Cycle Measurements and 2 K-Type Remote Probes is the perfect meter for HVAC or plant maintenance. The IR thermometer measures the surface temperature from -4 to 518 °F (-20 to 270 °C)…

The EX350 is a professional DMM loaded with advanced features and functions. Low Impedance (LoZ) mode eliminates false readings caused by ghost voltages. Low Pass Filter (LPF)attenuates high frequencies to reduce noise for accurate readings. True RMS provides accurate readings when measuring…

The PGT120.CU device is designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120 Series ESD Combo Testers. The PGT120.CU is designed to verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment.…

48VFL11 Temperature PID controller offers Fuzzy Logic enhanced PID and a Soft-Start feature that protects heaters from cold-starts. PID plus Fuzzy Logic tackles even the most demanding applications, eliminating over-shoot, unwanted process fluctuations, and drift. The Soft Start feature is ideally…

Extech’s SD900 allows technicians to easily monitor and record DC mA values from 3 external sensors, transducers, and other sources using one meter. It also stores the time and date of when readings are taken. The logger features a large triple LCD display and records data on an SD card in an…

SRM200 is a very useful instrument for checking surface resistance and resistance to ground. The instrument can be used on different work surfaces, floors, chairs, carts, clothing and packaging materials, etc. The measured value is displayed with LED display that indicates whether the value is…

Quickly Identifies and Pinpoints Gas Leaks 16" (406mm) gooseneck for easy access into hard to reach locations High Sensitivity One hand operation with thumb controlled sensitivity adjustments to eliminate background gas levels Visible and audible alarm at 10% (LEL) Lower…

Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R,P,ESR) Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance) Simultaneous 20,000/2,000 count…

The 7220.45 hand probes are designed to be used with resistance meters to evaluate ESD flooring according to ANSI ESD20.20. The probe is held in the hand and ensures excellent contact with skin while performing Walking Tests and other resistance measurements. The contact surface is made from rugged…

The PQ3450-2 is a 200 Amp Data logging Power Analyzer (up to 30,000 sets of measurements). Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu. Full system analysis with up to 35 parameters. Includes 200 Amp Current Clamps; Optional 1200 Amp Current Clamps or 3000…

The METRISO 3000 test kit measures a wide range of values: low resistance from 1KilaOhm to 1.2 TeraOhm. The kit comes with two 5lb disc probes and has an integrated temperature and humidity gauge. Measuring voltage can be set between 10 – 500V and also be varied if desired.

Simply approach the source at any angle and the triple-axis meter automatically determines EMF (electro magnetic frequencies), eliminating the need for additional calculations. X, Y, and Z axis results can also be viewed independently. Measures electro magnetic fields of extremely low frequency…

Type K high temperature probe with mini connector High temperature range: -40 to 1472°F (-40 to 800°C) 70.8" (1.8m) coiled cable with Type K mini connector 6" (150mm) probe length; 0.126" (3.2mm) diameter

The Extech UV505 pocket-sized UV light meter measures UV-AB light from natural and artificial light sources used in outdoor activities and indoor medical testing, laboratory/research, industrial, education, electronics, and forensics/criminology applications. It offers a backlit display, cosine…

High qualitlity alligator clip for grounding items such as ESD wrist straps. Connect to a standard banana plug

The BFN®G10 ionizing gun combines portability, fast static decay rates, excellent balance and low compressed air consumption to efficiently remove static and contaminates in the Semi-conductor, Electronic Assembly, Medical Device, Optics, Automotive and Pharmaceutical markets. The BFN®G10…

Extension set with T-handle Note: Can be used only with Model 870 probe

The 890 two-sided probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The 890 probes unique two sized design combines a concentric ring probe and a cylindrical disk probe into one easy to use…

The IDP-STAT® ESD Badge Holders are an excellent way to shield employee badges, guest passes, or key cards. Made from permanently dissipative IDP-STAT® PVC film, these badge holders will never fail in the field and become a potential ESD threat. The ESD protection makes them safe for use in…

Quickly and accurately verify the calibration of the Ranger Series dual wire resistance constant monitors. The CM2015PV is a resistance box with fixed 5% precision resistors. Resistance decade boxes can quickly and accurately simulate resistance for testing the accuracy of ESD testers and meters.

The MA445 is an 11 Function, 400A True RMS AC/DC Clamp Meter and NCV. Compact Clamp Meter with Type K temperature measurements. True RMS feature for accurate readings regardless of waveforms. 1.2" (30mm) jaw size fits conductors up to 500MCM. CAT III 600V safety rating. CE and ETL certified.…

This SRM 110 from Wolfgang Warmbier uses parallel electrodes and concentric rings to accurately measure RTT, RTG, or resistivity for periodic verification, factory audits or test lab evaluation of product. This meter is designed to verify incoming materials such as floor mats, table mats, bins and…

Key Features Detects between 100 V AC to 69,000 V AC Can be used in 5 ways - around the neck, clipped to front jacket pocket or belt, in the hand, on an arm and on a hot stick Allows hands free operation for work tasks by using a safety break-away neck lanyard or clipped or strapped…

The ET38 is a Voltage and Continuity Tester. This product has a flat head screw driver tip which tests voltages between 12 and 300V AC. LED light indicates the presence of a live voltage. Includes pocket clip and two button batteries.

The EC210 is a Compact handheld Conductivity Meter with long life carbon rod combination electrode measures Conductivity, TDS and Temperature. Units of measure include μS/cm, mS/ cm, ppm, °F, and °C. The meter features three ranges for Conductivity and TDS plus adjustable Temperature…

The Extech UV510 UV light meter measures UVA light radiation from natural and artificial light sources. It offers a backlit dual display, cosine corrected sensor, two selectable ranges, zero function, min/max recording, display hold, and auto power off. Compact size with handy wrist strap gives you…

Monitor visible light levels anywhere with fast, stable and accurate response. Results are easily read on the extra large LCD (1½" high, 38.1 mm) with bar graph, low battery and over range indications. The color and cosine corrected sensor meets C.I.E. photopic spectrum. Will read LED light. Also…

The METRISO® B530 ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020 and IEC 61340-5-1 and for qualification / verification of ESD control elements. The kit is built around the METRISO® B530 digital high resistance meter. …

Measures surface and volume resistance.