Our 1.4mL 96-well plate is ideal for separations of nucleic acids and clean-up procedures with magnetic beads. The unique square top with round bottom design allows for optimum mixing and enhanced recovery of magnetic beads. Separated round well bottoms allow for the use of ring style magnetic…

Pre-slit wells prevent probe damage and eliminate the risk of coring Printed alpha numeric Soft, supple, and compliant silicone seals tightly Mat can be reused Compatible with a wide range of chemicals and aggressive solvents

This 96-well PCR plate is made using only ultra-clear, virgin, medical grade polypropylene. Uniform thin-wall design allows for optimized heat transfer.   Available with: Use with most 0.1/0.2mL blocks Raised rims assist in heat sealing Moulded in alphanumeric reference…

Sample protection while processing, automation with pipette tips, sample indexing

Our 2.2mL 96-well plate is ideal for magnetic bead-based nucleic acid and protein affinity purification performed on automated separation systems.  The unique square top with round bottom design allows for optimum mixing and enhanced recovery of magnetic beads.  Wells also have a conical…

5plts/pk 10/pks/cs

Works as a plate seal (to eliminate cross contamination) and compression mat all-in-one! Our compression molded round plug, silicone sealing mats for PCR plates minimize sample evaporation in a wide range of temperatures. These mats are chemically resistant and reusable; containing no adhesives…

Optimize your signal with our full-skirt low profile, 96-well 0.1mL PCR plate.  It works equally well for manual or automated protocols.  The short well design optimizes assay conditions by reducing the distance between sample (in the well) and heated lid. By eliminating evaporation on…

Individual tubes with attached flat caps achieve even and precise thermal transfer to maximize your yield.  Our standard profile, 0.2mL tubes with attached flat caps are precision molded for clarity and sample visualization.  Flat caps are frosted for writing or labeling. Molded as a…

Our 5.0mL 24-well plate is ideal for magnetic bead-based nucleic acid and protein affinity purification (of larger sample sizes, 5mL) performed on automated separation systems.  The unique square top with round bottom design allows for optimum mixing and enhanced recovery of magnetic…

Soft and non-permeable, our 2.0 mil aluminum sealing foil offers optimum sealing for all PCR plates. Using a medical-grade acrylic adhesive, these foil seals are more durable than the thin 1.4mil aluminum films, and are better suited to longer term sample storage.  Soft and non-permeable,…

FIltered Universal Pipet Tips from ILP are used to prevent cross-contamination in laboratory liquid handling. Certified DNase-, RNase, DNA/RNA-, Pyrogen-Free Filters Made of Virgin Hydrophobic Polyethylene Tips Made of USP Class VI Virgin Polypropylene Molded-in Graduations for…

23A00U136: Mid-height, 24.4mm 96-square well U-bottom plates maximize 1mL sample and storage. Plates utilize 30-40% less vertical space in freezers, automated loaders, under the hood, and other locations where space is at a premium. Plates have stacking lugs to help prevent toppling. These plates…

Polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates. This seal is ideally suited for short term storage,…

23A00U153: Our sterile, black, flat bottom, 96-well assay plates with lid are ideal for general (non-tissue culture) applications including microbiology, serology, and fluorescence assays. Made of polystyrene, these plates are solid black and opaque in color with no transparency, quenching light…

This shared wall 8mm round well U-bottom plate combines optimized mixing and storage with automation friendly design.  Sturdy and warp resistant, with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening,…

23A00U189: Single well mid-height reservoir with flat bottom. Single well reservoir flat bottom, combines space savings with automation friendly design. Sturdy and warp resistant, ultra-flat and rigid construction, with a stable base, this reservoir is ideal for manual or automated applications. …

Comes in standard 8x12 configuration, molded in alpha-numeric position markings Each well offers a working volume of 200ul Uniform wall thickness Rigid automation friendly design compatible with stackers, grippers, heater/cooler blocks ANSI/SLAS 2004-1 (SBS) compliant footprint Assay…

For use on the ABI 3100.

Our 10.0mL 24-well plate is ideal for growing bacterial protein cultures and for sample purification with magnetic beads utilizing manual and automated systems. The unique square top with round bottom design allows for optimum mixing and enhanced recovery of magnetic beads. Separated round well…

Our 48-well plate is ideal for large volume samples used in combitorial chemistry, environmental, and food testing.  Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films.  Manufactured from virgin polyproplyene and certified…

ILP’s sterile, filtered, and low binding alternative to the Rainin LTS® and XLS® pipette tips.  Are precision molded utilizing USP Class VI virgin polypropylene.  Our thin wall design, low bind surfaces, and tight quality specifications produces a tip with consistent…

23A00U199: Clear Zone adhesive free 96-well film Our 50µm thick clear polypropylene film has 96 adhesive free wells. Clear Polypropylene is laid over a white backing for high contrast and low cross talk. Using the two (2) end tabs and 96 circles for alignment makes it easy to quickly…

The encapsulated silicone seal does not expose your sample to adhesive! These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR…

23A00U201: Permanent seal for enhanced traceability and seal integrity. These extremely clear polyester films offer a thick, extra strong seal, and a large writing/labeling surface. Not easily removed, these seals are designed for storage applications where sample traceability and seal integrity is…

Huge wells for easier access and more volume in a full height plate - optimized for mixing and sample recovery.  Ideal for assay work, magnetic beads, and sample storage. The unique open bottom design offers more area for magnetic beads, while larger diameter wells improve sample access…

23A00U194: Full volume 96-indent reservoir. Our 290mL single well reservoirs with 96 pyramid bottom indents, offer full volume in an automation friendly design. Sturdy and warp resistant, ultra-flat and rigid construction, with a stable base, this reservoir is ideal for manual or automated…

23A00U196: Soft and impermeable aluminum sealing foils with medical grade acrylic adhesive. Once applied, the seal adheres aggressively, forming a tight positive seal preventing evaporation of VOCs, sample loss in storage, drying, cross contamination, and reducing the risk of aerosols and pathogens…

This low height plate is ideal for assay work, magnetic beads, and maximizing sample storage. The unique open bottom design offers more area for magnetic beads, while larger diameter wells improve sample access and mixing.  Raised rims on each well make for easy and secure sealing with…

23A00U178: Easy access micro-slit sealing mats with the increased chemical compatibility of a PTFE coated silicone mat. Ideal for use with automation (HTS, autosamplers, etc.) or applications where accessing samples multiple times. A micro-slit in the center of each well allows easy access, ideal…

The Innovative Laboratory Products 120 uL deep well plate with square wells, is suitable for use in research facilities and chemical laboratories. It is made of high quality, polypropylene material which ensures durability and long lasting usage.