Polypropylene Sealing Films

Compare Tool

Select up to 3 products

Polypropylene Sealing Films
1 - 32 of 165
Sort
View
Show
  • Polypropylene Sealing Film for qPCR

    Innovative Laboratory Products

    …tight seal is formed on just that surface (not over the sample). This silicone seal adheres aggressively and diminishes the possibility of "Edge Effect". The plasticized backing of this film is scored on both ends to allow for two handed (precise) placement on the plate. Both film and…

  • With a 70µm top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multi-channel pipettors and robotic probes. Dimensions are 79.4mm x 142.9mm for 96-well plates Clear zones and end tabs…

  • Permanent seal Easily pierceable with autosampler needles/ABI®3730 Seal integrity range: -80 °C to 80 °C (or 110 °C when used with pressurized heated PCR lid) Moderate solvent resistance Optically clear Use Seals polypropylene, polyethylene, polystyrene and cyclic…

  • Sealing Tape

    Thermo Scientific Nunc

    …backing and removable tabs Compatible with thermalcycling Covers entire surface of plate with non-toxic, self-adhesive film. It provides an effective seal on polypropylene and polystyrene plates to prevent evaporation and minimize contamination. Acrylate adhesive is compatible with aqueous…

  • …of the film on the plate but are perforated for easy removal if necessary. Each film measures 78.3 x 135.5 mm overall. Length between the perforations wth end tabs removed is 118.1 mm. Each package of ThermalSeal® A™ films includes one sealing paddle for ensuring a firm seal, also…

  • …cross-contamination and prevents spillage A multilayer film consisting of a top pierceable clear polyethylene film and a white polypropylene sublayer with 96 circular areas void of adhesive The white sublayer aids in the alignment of the film to the plate; alignment of opposing corner wells…

  • …includes a molded polypropylene dispenser with a hinged “clamshell” design and sealing films supplied in a novel sheeted-roll configuration. Environmentally friendly green product: reduced waste; no protective backing to remove and discard Convenient, easy film application for…

  • …and two rolls of perforated film. Cost effective replacement rolls are sold separately. The applicator facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. The film is ideal for ELISA assays, incubation…

  • Peelable Pierceable Seal integrity range: -20 °C to 80 °C Autoclavable (121 °C) Use Seals polypropylene, polystyrene, polyethylene and COC Suitable for cell culture and overnight incubations

  • …additional film directly on top of a previously pierced seal. Key Features:  Pierceable Peelable from polystyrene plates Resealable foil-on-foil Seal integrity range: -20 degrees C to 110 degrees C Moderate solvent resistance  Use: Seals polystyrene and polypropylene

  • PTFE sealing film has an adhesive free area around each well so plastic pipette tips and metal probes stay clean. Solvent-free adhesives adhere to polypropylene, polystyrene and polycarbonate materials PTFE film is compatible with aqueous solutions and organic solvents Excellent…

  • …Non-Woven Gas Permeable Peelable Film for Cell & Seed Culture Non-woven gas permeable, limits evporation, peelable, pierceable; designed for cell culture and suitable for seed and insect storage.  For polypropylene and polystyrene plates only.  This seal is a non-woven material…

  • Transparent (Clear) and Peelable Heat Sealing Film for the Ultraseal Pro.  Optically clear, peelable heat sealing film suitable for qPCR and optical applications.  When heat is applied, the clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene,…

  • …backed film forming a weld seal to Polypropylene microplate Application: Forms a seal to Polypropylene with good optical properties. Suitable for QPCR and other optical applications such as fluorescence or colorimetric measurements. Sealing conditions: 3 seconds at 170°C Seal

  • The sealing options in the Pure•Amp™ line include clear plastic film for end-point PCR, two optically clear films for qPCR, plus one pierceable aluminum membrane for storage and/or PCR. All Pure•Amp™ sealing products are pre-cut for a perfect fit on the…

  • Polyester Sealing Film

    Innovative Laboratory Products

    Polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates. This seal is ideally suited for short term storage,…

  • …optical applications Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Heat Seal is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene,…

  • With a 70 mum polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip…

  • General Purpose Sealing Film

    Excel Scientific

    General Purpose Sealing Film Application: Ideal for ELISA, Incubation and General Use Temperature Range: -40°C to +120°C - Certified DNase- & RNase- free - Designed to be used with both polystyrene and polypropylene plates - 2.0mil clear polypropylene film features good…

  • Amplifyt® 384-Well PCR Plates, LightCycler PCR plate

    labForce® (a Thomas Scientific Brand)

    …ensure optimal heat transfer for high reaction efficiency. Well ridges reduce sample evaporation when sealing with film or foil Manufactured from high-clarity, ultra-pure polypropylene (meets FDA 21 CFR 177.1520 & USP Class VI). Certified free of detectable DNase, RNase, DNA, PCR…

  • Amplifyt® 96-Well PCR Plates, Semi-Skirt

    labForce® (a Thomas Scientific Brand)

    …ensure optimal heat transfer for high reaction efficiency. Well ridges reduce sample evaporation when sealing with film or foil Manufactured from high-clarity, ultra-pure polypropylene (meets FDA 21 CFR 177.1520 & USP Class VI). Certified free of detectable DNase, RNase, DNA, PCR…

  • Amplifyt® 384-Well PCR Plates

    labForce® (a Thomas Scientific Brand)

    …ensure optimal heat transfer for high reaction efficiency. Well ridges reduce sample evaporation when sealing with film or foil Manufactured from high-clarity, ultra-pure polypropylene (meets FDA 21 CFR 177.1520 & USP Class VI). Certified free of detectable DNase, RNase, DNA, PCR…

  • …We also offer optically clear caps and opaque black or white plates for Real Time PCR. And you can seal these plates with re-usable silicone sealing mats and polypropylene sealing film. Labcon PurePlus® PCR tubes, strips and plates are designed to fit many popular thermocyclers including…

  • polypropylene film with adhesive formulations is optimized for specific PCR applications. Traditional film dimension measures 135.1 x 79.4 mm (123.1 mm without end tabs) and offers sufficient sealing area for most PCR plates. Optimal Performance for Traditional/Classic PCR. ThermalSeal sealing films

  • …We also offer optically clear caps and opaque black or white plates for Real Time PCR. And you can seal these plates with re-usable silicone sealing mats and polypropylene sealing film. Labcon PurePlus® PCR tubes, strips and plates are designed to fit many popular thermocyclers including…

  • …resistant heat sealing foil, peelable; suitable for low and room temperature compound storage.  Our peelable foil film is a DMSO resistant seal compatible with polypropylene and forming an excellent seal to cyclic olefin copolymer (COC) plates.  The solvent resistance of this seal enables…

  • …allows precise thermal transfer for optimum results. Includes Ultra Clear sealing film and printed alphanumeric grid for ease of well identification. Certified RNase-/DNase-free Nonpyrogenic Nonsterile Manufactured with 99.9% pure virgin polypropylene Includes Sealing Films

  • Breathable Sealing Tape provides for adequate gas exchange while maintaining a sterile barrier. Breathable sealing tape fits all 96- and 384-well microplates and polypropylene blocks.

  • Amplifyt® 96-Well PCR Plates, Semi-Skirt, Individual Colors

    labForce® (a Thomas Scientific Brand)

    …applying films and foils easier and more effective. High-contrast, black alphanumeric indexing for easy well identification. Ultra-thin, uniform wells ensure optimal heat transfer for high reaction efficiency. Well ridges reduce sample evaporation when sealing with strip caps, film, or foil…

  • High performance crystal clear packaging tape seals mailroom shipments tight. Acrylic adhesive resists aging and works in cold temperatures Polypropylene film resists tears and splits

  • Sealing Tapes For Microwell Plates

    Thermo Scientific Nunc

    …evaporation Removable tabs Pressure sensitive acrylate adhesive Temperature range: -40° to 80°C Sealing tape for microwell plates provides an effective seal on all polystyrene, polypropylene and polycarbonate microwell plates. Compatible with aqueous solutions and organic solvents.

  • …& RNase- free Designed to be used with both polystyrene and polypropylene plates 2.0mil clear polypropylene film features good clarity and easy handling Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.