Water Quality
-
Hydrogen peroxide is a strong oxidizing agent with a variety of uses. Applications include the treating of industrial effluents and domestic waste and serving as a disinfectant in aseptic packaging. For the food and beverage industry, CHEMetrics Hydrogen Peroxide CHEMets® and…
-
Chlorine Testing Dispenser
HF ScientificDPD Powder Pop® Dispenser with tests for Chlorine Compact and convenient Redesigned dispenser prevents clogging Dispense into round or square cuvettes Push button operation for precise dosing Portable dispensers accurately deliver the correct volume of DPD reagent for…
-
Detergent Test Kit
LaMotte4507 Drop Count Method For determining anionic forms of detergent One drop equals 1.0 ppm detergents; range approximately 0 to 5.0 ppm Sufficient for 60 tests at 5.0 ppm
-
AquaComparator Test Kit Line
LovibondLow Cost, Easy to use kits for testing a wide range of water quality Parameters Continuous gradient color disks provide accurate measurements—no need to “extrapolate” between discrete color blocks Rotate the color wheel to obtain a color match with the reacted sample and read your result…
-
Phosphonate Test Kit
LaMotte7625 CAS Dropper Pipet Sufficient for 50 tests at 20 ppm 1 drop = 1.25 ppm HEDP 1 drop = 1.4 ppm PBTC Chromazurol S method may be used for Dequest, Bayhibit, Belcor 575 and Belsperse 161 phosphonates. Indicator changes from yellow to pink at the pH ideal for the reaction, then…
-
-
QUANTOFIX Chlorine 500-100 strip box
MACHEREY-NAGELQUANTOFIX Chlorine 500 semi-quantitative test strips for the determination of chlorine. Measuring range: 0-25-50-100-250-500 mg/L Cl2
-
-
Low-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries),…
-
-
Chlorine Bleach Test Kit
LaMotteApplications: Industrial Water Boiling and Cooling, Water and Wastewater This test kit measures for Chlorine Bleach using the Direct Reading Titrator method. Range/sensitivity is 00-10%/0.2% Cl.
-
Hydrogen peroxide is a strong oxidizing agent with a variety of uses. Applications include the treating of industrial effluents and domestic waste and serving as a disinfectant in aseptic packaging. For the food and beverage industry, CHEMetrics Hydrogen Peroxide CHEMets® and…
-
Silica CHEMets® Kits
CHEMetricsSilica (SiO2) is the oxide of silicon, the second most abundant element in the earth's crust. Silica is present as silicates in most natural waters. Typical concentrations lie between 1 and 30 mg/L. Higher concentrations may exist in brackish waters and brines. The silica content of…
-
Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron…
-
-
-
-
Sensafe® Chlorine Test Strips
Industrial Test SystemsSensitive, safe to use - SenSafe No reagent preparation time Easy to do, quick results These test strips are an excellent alternative to wet chemical chlorine tests. The unique indicator (TMB) is reactive only to free chlorine; therefore, no interference from monochloramines occurs.…
-
Range: 0.5 to 14mg/L Parameter: Nitrate Method: 2,6 Dimethylphenole For use in test kits, colorimeters and spectrophotometers Case of 24 Manufacturer Part No: LOV-2420702
-
QAC Dual Range Test Strips
LaMotteThe New Dual Range QAC Test Strip takes care of ALL of your testing needs on ONE STRIP! Whether checking the concentration of your QAC solution or checking to ensure complete removal from treated surfaces, the new Dual Range QAC Test Strip DOES IT ALL! Chemically-treated test strips change…
-
Hardness is a measure of the mineral content of water. Calcium and magnesium are the most common minerals that contribute to hardness. Hard water causes scaling in boilers and other industrial equipment, and diminishes the effectiveness of soaps and detergents. The EDTA Method (Total) …
-
Phosphate Vacu-vials® Kits
CHEMetricsPhosphorus occurs naturally in rock formations in the earth's crust, usually as phosphate. High phosphate concentrations in surface waters may indicate fertilizer runoff, domestic waste discharge, or the presence of industrial effluents or detergents. Although phosphates from these sources are…
-
Glycol CHEMets Kit
CHEMetricsEthylene glycol and propylene glycol are the primary ingredients in commercially-available antifreezes. They are used with various corrosion inhibitors to protect metal surfaces in cooling water systems. CHEMetrics glycol kits are used to monitor potable waters for glycol contamination…
-
Coliform Test Kit
LaMotteYes/No qualitative test Sensitivity less than 2.2 per 100 mL of sample No incubation equipment required; only room temperature
-
-
Phenols CHEMets® Kits
CHEMetricsPhenol (hydroxybenzene) is the simplest of a group of similar organic chemicals, which includes cresols, xylenols, and catechols. Phenol itself is a common ingredient of disinfectants. In drinking water, low-level phenolic concentrations impart a foul taste and odor, especially upon chlorination.…
-
Waterworks Test Strips
Industrial Test SystemsDip and read No mixing sample and reagent Economical, quick results Patented tests are quick alternatives for food or environmental testing. Supplied in bottles of 50 loose strips or packages of individually wrapped strips Tests for lead and other heavy metals
-
Sulfide Test Kits
LaMotte3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…
-
Method Dissolved carbon dioxide (CO2) is naturally present as a result of animal respiration, the decay of organic matter, and the decomposition of certain minerals. It is the major source of acidity in unpolluted water samples. Surface waters typically contain less than 10 ppm…
-
Alkalinity Titrets® Kits
CHEMetricsMethods The alkalinity of water is a measurement of its buffering capacity. Alkalinity of natural waters is typically a combination of bicarbonate, carbonate, and hydroxide ions. Sewage and wastewaters usually exhibit higher alkalinities due to the presence of silicates and phosphates. …
-
QUANTOFIX Sulfite - box of 100 strips
MACHEREY-NAGELQUANTOFIX Sulphite semi-quantitative test strips for the determination of sulphite in solutions. Measuring range: 0-10-25-50-100-250- 500-1000 mg/L SO32-
-
Water Test Strips
LaMotteInsta-Test® strips are available to perform checks for water quality factors. Test strips are a quick way to monitor water without having to use reagents.