PCR Tubes

Compare Tool

Select up to 3 products

1 - 32 of 78
Sort
View
Show

Greiner Bio-One

  • PCR Tubes

    Thermo Scientific Pierce

    Thomas No. 1207H50-H51 Uniform thin walls Compatible with standard 0.2mL thermal cycler blocks Maximum volume: 0.25mL Flat caps are frosted Thomas No. 1207H52-H53 Uniform thin walls Compatible with standard 0.5mL thermal cycler…

  • PCR Tubes

    Eppendorf

    Eppendorf PCR Tubes Manufactured from polypropylene Reduced risk of contamination Available in 0.2 and 0.5 mL sizes 2-part polycarbonate rack consists of work tray and frame for 96 x 0.2 mL PCR tubes All tubes can be directly transferred to the Thermoblock Autoclavable at…

  • 96 Well PCR Preparation Racks

    Bio Plas

    Designed as preparation and storage racks for any variety of 0.2mL Tubes and Strip Caps before and after sample processing application Formatted in the standard 8 x 12 microtiter format Identified "A" through "H" vertically, and 1 through 12 horizontally, providing…

  • PCR Tubes, Strips & Caps

    Corning

    Precise fit optimizes heat transfer Certified DNase- and RNase-free Autoclavable Tube strips consist of eight 0.2 mL thin wall polypropylene tubes connected together. Dual connectors between adjacent tubes eliminate inadvertent breakage during sample handling. Tube strips are…

  • PYREX® 30mm Diameter 90° Coarse Porosity Fritted Disc Gas Dispersion Tubes

    Corning

    These 30mm diameter PYREX® tubes have a coarse porosity (40 to 60µm) fritted disc at an angle of approximately 15° and are used to disperse or scrub gas in liquids.. This permits the small gas bubbles to rise from the disc surface without excessive formation of large bubbles. Its performance is…

  • SureSeal S™ Microcentrifuge Tubes

    MTC Bio

    MTC Bio’s SureSeal S™ microcentrifuge tubes are designed for a broad range of research applications, including enzyme digests, DNA isolation/purification, centrifugation, incubation and general sample/reagent storage. With a variety of design advances, SureSeal Tubes improve sample…

  • Thin Wall PCR Tubes with Attached Flat Caps

    Globe Scientific

    For those procedures requiring only a few tubes at a time Virgin polypropylene (PP) Autoclavable Thin wall 0.2mL and 0.6mL Assorted colors

  • Corning® 96 Well Polyethylene Cluster Tube 8-Cap Strips, 12 Strips per Bag,…

    Corning

    Polyethylene 8-cap strips are designed to fit 1.2mL cluster tubes and cluster tube strips.

  • PCR 8-Strip Tubes

    NEST Scientific USA

    NEST has both clear and white 0.2 mL PCR tubes which respectively applies to the general PCR and qPCR reactions Same color 0.2mL low profile PCR tubes can be applied to the same usage 15.4mm low profile tubes are designed to minimize the condensate contamination, particularly for the…

  • Semi-Skirt 96 Well PCR Plates

    NEST Scientific USA

    High quality Polypropylene material to guarantee low protein absorption and/or sample loss White plates are ideal for qPCR Autoclavable PCR Plate, semi skirt Both high profile and low profile semi skirt PCR plates are available Compatible with most thermal cyclers Stronger…

  • 96 Well PCR Plates

    NEST Scientific USA

    High quality Polypropylene material to guarantee low protein absorption and/or sample loss White plates are ideal for qPCR Autoclavable Plate without skirt can be cut to any desired format Both high profile and low profile semi skirt PCR plates are available Compatible with most…

  • 0.2mL PCR Tubes with Attached Caps

    Labcon

    Labcon PCR* tubes are designed to fit many popular thermocyclers including brands like Applied Biosystems, Eppendorf, Thermo Scientific, and Bio Rad. All our PCR* disposables are made from 100% virgin polypropylene and are lot tested and certified to be free of RNase, DNase, ATP, and Human DNA. Autoclavable.

  • Ultraflux Individual PCR Tubes

    SSI

    0.2 and 0.5 mL volumes Dome or flat caps Manufactured from the finest grade of virgin polypropylene, these tubes feature dimensional uniformity throughout the critical sidewall and conical bottom. This ensures even contact with the thermal cycler temperature block which delivers…

  • PCR 8-Strip Tubes & Caps

    NEST Scientific USA

    PCR 8-Strip Tubes NEST have both clear and white 0.2mL PCR tubes which respectively applies to the general PCR and qPCR reactions Same colored 0.2mL high profile PCR tubes can be applied to the same usage 15.4mm low profile tubes are designed to minimize the condensate contamination,…

  • Thomas 8-Strip Thin Wall PCR Tubes And Caps

    Thomas®

    Polypropylene construction Non-sterile Certified RNase- and DNase-free Wide variety of colors Thomas 8-Strip Thin Wall PCR Tubes fit all major manufacturer's thermal cyclers and provide reliable, consistent performance. Sample identification is simplified with numerical markings on strip tubes…

  • Ultraflux Snapstrip II PCR Tube

    SSI

    Thin tube wall is engineered to give the most efficient environment for rapid thermal transfer enabling optimal yield in your methods and applications Available in flat and low profile versions Attached, 8-strip tubes each have their own high optical clarity flat cap. Ideal for use in…

  • PCR Reaction Tube Strips

    Globe Scientific

    These 0.2mL tubes come in strips of 8 with the matching 8 cap strips being sold separately. This 8-strip format facilitates loading into 8 x 12 thermal cyclers.

  • 0.5mL Thin Wall PCR Tubes with Flat Caps

    Axygen®

    Axygen® 0.5mL polypropylene thin wall PCR tubes with flat caps are designed to fit standard 96 well blocks and are available in an assortment of colors. Ultra-thin and consistent wall thickness allows precise thermal transfer and even insertion cap ensures a tight fit to prevent evaporation. …

  • Microtiter Cluster Tubes

    Globe Scientific

  • qPCR Reaction Tubes/Plates

    BrandTech®

    This line of white PCR products is designed specifically to optimize results when performing quantitative Real Time PCR (qPCR). White PCR strips and plates offer significantly better results in the analysis of fluorescence signals and consequently with the quantification of replicated DNA. …

  • PYREX® Diameter 90° Coarse Porosity Fritted Disc Gas Dispersion Tubes

    Corning

    These PYREX® tubes have a coarse porosity (40 to 60µm) fritted disc at an angle of 90° and are used to disperse or scrub gas in liquids. The approximate overall dimension across the disc and stem is 35mm for a 20mm disc. For more information on fritted products, please check the Guide to Selecting…

  • PCR Tubes

    Biologix

    Made of prime virgin polypropylene Ultra thin-wall offers high degree of transparency, easy for observation and heat conduction Domed caps ensure efficient heat transfer, while flat caps are ideal for Real-Time PCR (qPCR) Unique design prevents opening during cycling and incubation …

  • Thin Wall PCR Tubes with Attached Dome Caps

    Globe Scientific

    For those procedures requiring only a few tubes at a time Virgin polypropylene (PP) Autoclavable Thin wall 0.2mL and 0.6mL Assorted colors

  • Ultraflux Snapstrip PCR Tubes

    SSI

    Thin tube wall is engineered to give the most efficient environment for rapid thermal transfer enabling optimal yield in your methods and applications Attached 8-strips tubes each have their own individual attached dome cap. The individual caps help to resolve any potential concerns centering…

  • PYREX® Gas Dispersion Tubes with 30mm Diameter O.D. Coarse Porosity Fritted Disc

    Corning

    These PYREX® gas dispersion tubes have a 30mm diameter coarse porosity (40 to 60µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller bubbles, however…

  • Thin Wall PCR Tubes

    Polypropylene construction Certified RNase- and DNase-free Non-sterile Flat or dome caps Wide variety of colors Thin Wall PCR tubes fit all major manufacturer's thermal cyclers and provide reliable, consistent performance. Tubes come in 0.2 or 0.6 mL thin wall models. …

  • AMPLITUBE™ PCR Reaction Strips with Attached Caps

    Simport

    Made of polypropylene This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer. …

  • Thomas Thin Wall PCR Tubes

    Thomas®

    Polypropylene construction Certified RNase- and DNase-free Non-sterile Flat or dome caps Wide variety of colors Thomas Thin Wall PCR tubes fit all major manufacturer's thermal cyclers and provide reliable, consistent performance. Tubes come in 0.2mL thin wall models. …

  • Amplitube™, Dome Cap

    Simport

    Made of polypropylene Simport Reaction Strips include 8 or 12 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer, therefore reducing PCR reaction time in most 96-well "V" bottomed thermal cyclers such as MJ…

  • AMPLITUBE™ PCR Reaction Strips of 8

    Simport

    Made of polypropylene Simport Reaction Strips include 8 or 12 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer, therefore reducing PCR reaction time in most 96-well “V” bottomed thermal cyclers such as MJ Research,…

  • Ultraflux Strip PCR Tubes

    SSI

    Constant high quality Maximum performance Certified free of detectable RNAse, DNase, DNA and PCR inhibitors Tubes are manufactured in three tube configurations: individual, 8-strip and 12-strip.

  • PCR Reaction Tubes

    BrandTech®

    BRAND PCR tube strips are manufactured from high-quality virgin plastics for excellent, reproducible results in most PCR applications. These tube strips are manufactured without lubricants or chemical additives that can contaminate reagents and samples. PCR tubes and plates from BRAND are…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.