These funnels are made from borosilicate glass and have a short stem. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.

Manufactured from type 1 class A borosilicate glass Receiving vessel is placed under bell to maintain sterility during filling

These long stem funnels have smooth walls, 60 degree cone angle, and external ribs to prevent air lock. Molded in Polypropylene, these clear funnels can also be autoclaved.

Manufactured from 304 Stainless Steel, United Scientific REUZ™ (“re-use”) Beakers with Handles feature graduations stamped into the inside wall for easy reading of volumes in milliliters or ounces. Include a pouring spout and large, comfortable stainless steel handle. The corrosion-resistant…

Solvent Addition Funnel Top Diameter: 90mm Stem OD: 12, 19 or 28mm available Stem Length: 75,100, or 125mm available Design permits the addition of solvents to flash chromatography columns without disturbing the silica gel/packing layer.

Funnel, 100 ml Funnel, 300ml

For aseptic filling of vessels Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

Ai 24/40 standard taper joint glass funnel.

Used in the preparation of block copolymers or any chemical synthesis requiring high vacuum techniques. Funnel features a large diameter ring seal between the coolant container and the addition funnel body thereby reducing stress and permitting for use of a wide range of coolants, from ice-water to…

The Chemware® funnel is used for ultra-pure liquid transfer in biotechnology applications, environmental analysis, semiconductor and electronic labs. The top cone has a high side was to limit splashing, while the narrow step fits into a range of containers. The low surface energy of PFA…

Addition Funnel, Pressure Equalizing, High Vacuum Valve, Synthware, Capacity: 25-250mL available, Joints: 14/20, 19/22 or 24/40 available, Valve Size: 0-4mm, Valve has extended tip for semi-needle valve adjustment.

The polypropylene Buchner funnels are two-piece, light-weight, and easy-to-clean. They are fully autoclavable. The top portion snaps to the bottom forming a vacuum tight seal. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for…

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

Made of either polystyrene or polypropylene Both are tapered at a 60° angle with inside fluting.

KIMAX® funnel with a short, wide stem Constructed with a heavy uniform wall and a strong, fire-polished rim and stem to provide a long service life Funnel has a high resistance to chemical attack and mechanical and thermal shock Designed from ASTM Specification E1095, Type IV…

Available in 3 volumes and 3 lengths with 60° side angles. These ribbed long stem funnels are made from food grade polypropylene and take standard size filter papers. Ideal for hard to reach areas with or without narrow openings.

For use in the Disinfectant Testing Procedure as described in the AOAC manual Cylinder ends are lightly glazed

Sturdy polypropylene construction is chemical resistant and steam sterilizable at 121º C (250º F). Faster filtrations with filter-step internal design. Ribs molded in outer wall prevent airlock. Parallel funnel stem, 8mm O.D, fits into most narrow mouth containers. 1226C20: top I.D.…

Replace glass lab funnels with Thermo Scientific™ Nalgene™ Utility Funnels, which are an excellent shatter-proof alternative.  5207H70 and 5207H78 are made from shatter-proof, autoclavable polypropylene 5207H86 has a large throat opening for faster transfer of materials…

Features: Large Opening Polypropylene 60 and 80mm Reaction Flange for Easy Connection Fits 10 thru 100L Reactor Systems Large funnels have a 60mm or 80mm flange fused to the bottom of the funnel. This design makes them ideal for filling our process reactors by clamping the…

With two chambers, cell deposit areas are close together and easy to find, helping to speed sample analysis. Two deposit areas on one slide enhance all of the advantages of the popular single chambers. Reduced time spent loading and unloading slides. Two cell deposit areas on the same slide…

Foxx Life Sciences EZwaste® 4" Safety Funnel features a latching lid with gasket to create an air-tight seal and to keep VOCs from evaporating into the air. The EZwaste® Safety Funnel is the ultimate lab safety product for liquid waste collection. Our safety funnels can be used as both a sealed…

Manufactured with 304 Stainless Steel, United Scientific™ REUZ™ (“re-use”) Stainless Steel Funnels include an air channel engineered for smooth, easy flow. Useful in laboratory or factory environments, the versatile funnels can be used with most liquids and powders. Carefully constructed, the…

Durable polypropylene funnels are translucent and allow safe and easy transfers of solids or liquids from one vessel to another.

Freeze drying ampoule Type 1, class A borosilicate glass Tubular Round bottom

KIMAX funnel constructed with heavy uniform walls and strong, fire polished rims and stems to give a long service life. Funnels have a high resistance to chemical attack, mechanical, and thermal shock. Designed from ASTM Specification E1095, Type I, Class B requirements.

A high quality laboratory grade porcelain, made with uniform wall thickness and dense materials which provides stable mechanical strength and little permeability. When properly used, the glazed pieces can withstand temperatures of 1050 degrees centigrade and the unglazed pieces can withstand…

Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…

Manufactured from type 1 class A borosilicate glass Receiving vessel is placed under bell to maintain sterility during filling

Make additions to burettes and narrow neck containers easily with this flared top thistle tube. Polypropylene plastic; chemical resistant, unbreakable, safe Steam autoclavable at 121°C (250°F) Dimensions: 27mm (1-1/16") I.D. top with a 41mm (1-5/8") O.D. flare …

The Simport ALL PLASTIC CytoSep™ MEGA Funnel provides an easy, efficient and cost effective method of producing high quality thin-layer slide preparations. It eliminates the need for stainless steel slide clips, offering laboratory workflow improvements. It is dedicated for convenient…