Available in three sizes, these funnels have eight internal ribs to facilitate filtration. They are made of polypropylene. Funnel Assortment These funnels have eight internal ribs to facilitate filtration. They are made of polypropylene and includes one each of the 35mm, 52mm, and 65mm funnels.

Unique design of this addition funnel permits solutions to be prepared using a magnetic Stir Bar. Side arm has a 2mm high vacuum glass T-Bore stopcock having a S.S. constant pressure retension device for evacuation and purging of both the funnel and lower vessel. Lower valve is a 0-4mm…

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

Large funnels are ideal for filling drums, barrels, tanks and carboys providing ample volume and fast flow. The two smaller sizes have a handle at the rim for added stability. Molded of natural polypropylene plastic Steam autoclavable at 121°C (250°F)

Durable polypropylene funnels are translucent and allow safe and easy transfers of solids or liquids from one vessel to another.

The Chemware® funnel is used for ultra-pure liquid transfer in biotechnology applications, environmental analysis, semiconductor and electronic labs. The top cone has a high side was to limit splashing, while the narrow step fits into a range of containers. The low surface energy of PFA…

KIMAX funnel constructed with heavy uniform walls and strong, fire polished rims and stems to give a long service life. Funnels have a high resistance to chemical attack, mechanical, and thermal shock. Designed from ASTM Specification E1095, Type I, Class B requirements.

Polyproplylene funnels with volume markings. Available in a wide range of sizes.

A high quality laboratory grade porcelain, made with uniform wall thickness and dense materials which provides stable mechanical strength and little permeability. When properly used, the glazed pieces can withstand temperatures of 1050 degrees centigrade and the unglazed pieces can withstand…

Fully compatible with the Shandon CytoSpin® Centrifuge, Simport CytoSep™ Cytology Funnels can be used to deposit a thin layer of cells in a clearly defined area of a microscope slide. The filter card absorbs any excess fluid. These Cytology Funnels have the filter cards pre-attached for…

Manufactured from type 1 class A borosilicate glass Receiving vessel is placed under bell to maintain sterility during filling

Solvent Addition Funnel Top Diameter: 90mm Stem OD: 12, 19 or 28mm available Stem Length: 75,100, or 125mm available Design permits the addition of solvents to flash chromatography columns without disturbing the silica gel/packing layer.

Addition Funnel, Pressure Equalizing, PTFE Stopcock, Synthware, Capacity: 25-1000mL available, Joints: 14/20 or 24/40 available, Stopcock Bore: 2 and 4mm available. Funnels come with PTFE stopcock in pressure equalizing line.

These borosilicate glass Sintered Funnels have a porous filtering plate. They come in three sizes and two levels of porosity . PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects,…

Ai 24/40 standard taper joint glass funnel.

Foxx Life Sciences EZwaste® 4" Safety Funnel features a latching lid with gasket to create an air-tight seal and to keep VOCs from evaporating into the air. The EZwaste® Safety Funnel is the ultimate lab safety product for liquid waste collection. Our safety funnels can be used as both a sealed…

These funnels will snap quickly in place, allowing the pad to align correctly with the sample tunnel. Made with a compression ring around the sample hole in order to better control the rate of absorption and to ensure more consistent results. Two ports, one in the sample well and one in the…

For use in the Disinfectant Testing Procedure as described in the AOAC manual Cylinder ends are lightly glazed

Replace glass lab funnels with Thermo Scientific™ Nalgene™ Utility Funnels, which are an excellent shatter-proof alternative.  5207H70 and 5207H78 are made from shatter-proof, autoclavable polypropylene 5207H86 has a large throat opening for faster transfer of materials…

Manufactured from type 1 class A borosilicate glass Receiving vessel is placed under bell to maintain sterility during filling

Borosil® Short Stem Funnels are built for durability and long-term use. Funnels have 60° bowl angles for perfect fit with filter papers. Used for filtration and decanting of a wide variety of liquids. Built from Borosil's world-renowned 3.3 borosilicate, low-expansion,…

ValueWare® borosilicate glass 58° long stem addition funnel with heavy uniform walls and strong, molded rims Long stems are fire polished for long service life High resistance to chemical attack, mechanical, and thermal shock Designed from ASTM specification E1095, Type I, Class B requirements

4565F10 will fit tubes up to 20 mm o.d. (without lip); outer mantle i.d. is 25 mm and inner tube o.d. is 8 mm; overall height: 70 mm 4565F25 can be used on bottles with maximum rim diameter of 44 mm; outer mantle i.d. is 45 mm and inner tube o.d. is 10 mm; overall height:   85 mm

Our Utility Funnels are made from tough, chemically-resistant polypropylene. They have a 60º cone angle and ribs to prevent air-lock. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.

This large, one piece, heavy-duty funnel is 6.35mm (1/4") thick. Perfect for industrial drums and other large funnel needs Made from low density polyethylene Exhibits exceptional chemical resistance to most acids, alkalis and some organic solvents.

Featuring graduations with a double scale from the PTFE stopcock, these borosilicate glass cylindrical funnels have a pressure equalizing sidearm. Standard Taper outer joint at the top is the same size as the lower Standard Taper inner joint.

Sterile, disposable, 250 ml plastic funnels specifically designed for microbiological testing of pharmaceuticals, food, beverages, water and other liquids. Used in combination with a gridded membrane filter and vacuum manifold system such as the Combisart.

Freeze drying ampoule Type 1, class A borosilicate glass, round bottom Tubular with firing off constriction on neck Rigidly controlled bottom to withstand pressure at low temperature

Made of either polystyrene or polypropylene Both are tapered at a 60° angle with inside fluting.

All components are available separately. The Simport CytoSep™ Cytology Funnel offers the 1-ml fluid chamber component including the 1 ml fluid chamber, 1 ml base holder, 1 ml chamber cap, and the appropriate filter paper.

High Quality Slide Preparation Funnels Guaranteed for Use with Popular Cytology Centrifuges Available with either single or double sample chambers Designed for single use only with pre-attached white or brown filter cards Available both with a disposable plastic slide clip…

Sturdy polypropylene construction is chemical resistant and steam sterilizable at 121º C (250º F). Faster filtrations with filter-step internal design. Ribs molded in outer wall prevent airlock. Parallel funnel stem, 8mm O.D, fits into most narrow mouth containers. 1226C20: top I.D.…