Vial Block

Compare Tool

Select up to 3 products

Vial Block
1 - 32 of 96
Sort
View
Show
  • Crystal Technologies

    …microprocessor controlled with an automatic PID temperature control program, providing accurate and uniform temperature distribution across the thermal block. Digital dry baths are ideal for a wide variety of life science, clinical and general chemistry applications. Product Features: …

  • Heat Transfer Block, Minivials, Synthware, Holds 3.0 and 5.0 mL heavy wall reaction vials.

  • …of small, vials and tubes. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates…

  • …heating/mixing blocks hold up to three different size and type of vessels at the same time. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Blocks, base…

  • …offers excellent heat transfer without interfering with magnetic stirring. All blocks are anodized for increased strength, durability and chemical resistance. A thermowell is provided for insertion of a temperature sensor or contact thermometer. Available for scintillation vials and dram vials.

  • …While Not Interfering with the Magnetic Field Holes are Spaced for Optimum Stirring of All Vials Holder Fits All 135mm Diameter Hot Plate Stirrers Each Section of the Block is Engraved with the Vial Size for Easy Identification Thermowell is Provided for Insertion of a PT-100 Temperature…

  • …construction provides excellent heat transfer while not interfering with the magnetic field Interchangeable pie wedges permit various sized vials or flasks on one hotplate Holes are spaced for optimum stirring of all vessels Holder fits all 135mm diameter hotplate stirrers Inserts…

  • …and prevents block from slipping, allowing for safe heating of your Chemglass or Genevac blocks. The innovative PTFE shield on the heating block keeps the exterior surface area at a temperature that is safe to touch. For example the PTFE shield would be approximately 80°C on vials heated to…

  • …tubes, vials, microplates, and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer. Heaters require OHAUS modular heating blocks for operation. Modular blocks are sold…

  • Quidel Corporation

    The Quidel Corporation lysis heat block is mainly used as a temperature controlling device during nucleic acid lysis. It is essential for heating samples in flasks, tube and vials while conducting experiments. It is used in research facilities and chemical laboratories.

  • These solid anodised Aluminium cooling and heating blocks ensure a consistent sample temperature is maintained. Compatible with large format AlteTubes.

  • Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect better heat transfer. Block has three bowl shaped-recesses, one 20mm straight-thru hole, one deep bowl-shaped hole, and one hole for a thermometer. 9594-08 auxiliary heat block for use…

  • …retention. Single block. Combination Blocks (5890J49, 1231R89, 1231R90) These blocks have been designed for variable sized samples. Constructed from a solid anodized aluminum block, the close contact of tubes to block walls allows for maximum heat retention. Single block. Vials (1231R91 to…

  • …tubes, and vials Recommended Use Use with Thermo Scientific™ Reacti-Vap™ Evaporator, Thermo Scientific™ Reacti-Vial™ Magnetic Stirrers and Small Reaction Vials, Thermo Scientific™ Reacti-Block™ Aluminum Blocks, and Thermo Scientific™…

  • …actual block or sample temperature. Block heater accepts one microplate block or two separate interchangeable modular blocks, accommodating various tube sizes from 0.2 mL micro-tubes to test tubes or vials up to 85 mm in height. Each block has a thermometer well for measuring block temperature.…

  • …Thermo Scientific™ Reacti-Block™ Aluminum Blocks. They are available with many hole configurations and are machine-drilled to accommodate almost any size Thermo Scientific™ Reacti-Vial™ Small Reaction Vial, test tube, or microcentrifuge tube. Constructed of an aluminum…

  • …Preparation Note: Working solution: dATP, dGTP, dTTP mixture: For one labeling reaction pipette: 1 μl dATP, (vial 2) 1 μl dGTP, (vial 4) 1 μl dTTP, (vial 5) to a reaction vial. Note: If the same type of labeled deoxyribonucleoside-triph osphate is used repeatedly, we recommend…

  • SPEX SamplePrep

    …(#2663) and the vial holder (#2191). Grinding load per vial is 1-3 gram, mixing load 3 mL. Sold in package of 200. Vial sets are an alternative to titer plates. Vials can be filled and sealed individually, and the larger vials can hold bigger samples than titer plates. Replacement vials and steel…

  • Ace Glass

    …our 1200ml, Ace 9601-16, Instatherm oil bath. Combine the rapid and precise temperature control of Instatherm with the safety of aluminum heating blocks. You may stir using a hot plate stirrer, however do not apply heat to the bath. See our 9600-20 complete heating system which features our 12125-32…

  • …foam vial holder. Carrier fits Geno/Grinder clamp; used in pairs. Grinding load per vial 1.5 mL. Vials can also be used with 2662 Cryo-Block or 2190 Vial Rack. Case of 10 sets, each set containing 24 vials pre-loaded with steel balls. 2241-PC Polycarbonate Vial : 5 mL polycarbonate vial with…

  • …accu-TEST™ COD Reactor Block is an economical solution for digestion of chemical oxygen demand (COD) samples. The accu-TEST COD Reactor Block is easier to use and more economical than other heating methods for COD vial digestion. The accu-TEST COD Reactor Block maintains temperature to…

  • quick-ship

    Argos Technologies

    Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree…

  • … Works with Aggressive Solvents The OPTIBLOCK is a simple, easy to use tool for medicinal and process chemists. The block accepts up to eight different vial sizes and fits directly onto a hot plate stirrer having a 135mm top plate diameter.PLEASE NOTE: The OP-5000-K1 Start Up…

  • …bottom flasks. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are…

  • CHEMetrics

    …comes in a cardboard box and contains everything needed to perform up to 97 tests (except distilled water): 98 vials and instructions. All COD Kits require the use of a Digestor Block and the V-2000 Photometer, a COD Photometer, or a spectrophotometer capable of accepting a 16 mm round cell.…

  • Bioscience, Inc.

    …also provides accurate results without a chemist. Vials feature premixed reagents and twistcaps for convenience, and a choice of EPA approved (method 410.4) mercury vials, or a non-mercury version (for easier reagent waste disposal). The COD Block Heater (Thomas number 9855E85) is preset to the…

  • Polycarbonate vial with screw-on cap, 1 1/8 in. diameter x 4 ½ in. (2.9 cm x 11.4 cm). Holds grinding media up to 1/2 in. Fits 2196-16-PE Holder and 2664 Cryo-Block. Grinding load per vial 20 mL. Sold as a pack of 48 Vials with 48 caps (2253C).

  • …perform up to 97 tests (except distilled water): 98 vials and instruction book. Range: 0-15,000 ppm (HR+) Mercury Free Method: APHA Standard Methods, 23rd ed., Method 3500-Cu C-1999. All COD Kits require the use of a Digestor Block and the V-2000 Photometer, a COD Photometer,…

  • …1 reaction block (24x 2ml vial, 32X 0.3ml vial, 4X 2Dram vial), 1 decapper for 8 mm crimped vial and 1 syringe Hamilton 81000. Thomas No. 1160V25 1 reaction block (24x 2ml vial, 32x 0.3ml vial, 4x 2Dram vial) Thomas No. 1160V26 1 reaction block (96x 0.3ml vial) Thomas…

  • Vials: Aluminum block holds twenty-four 2241-PC vials, as used in 2240-PC Vial Set. Cryo-Blocks are chilled in 2600 Cryo-Station to preserve RNA and proteins during grinding. Sold in pairs. 2663 Cryo-Block for 4 mL Polyethylene Vials: Aluminum block holds twenty-four 2241-PE vials, as used…

  • Techne (Cole-Parmer)

    …anodised aluminium, Techne has the widest choice of interchangeable block inserts of any manufacturer. This allows Techne Dri-Block® heaters to accommodate the widest variety of microtubes, test tubes, cups, plates, cuvettes and vials on the market, resulting in the most flexible Dri-Block®…

  • SPEX SamplePrep

    Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…

Compare Tool

Select up to 3 products