Vacuum Tubing Connector

Compare Tool

Select up to 3 products

Vacuum Tubing Connector
1 - 32 of 56
Sort
View
Show
  • Scienceware® Quick Disconnects

    Bel-Art - SP Scienceware

    Connect same or different size tubing with these polyethylene plastic connectors. Ideal for vacuum applications, water lines, manometers, and more 1226C59 & 9583M13 (F19730 series) connects same size tubing 9583M43 (F19731-0552) connects different size tubing

  • Dry Ice Trap

    Ace Glass

    With a 24/40 joint at the bottom. Inside diameter of coolant section is 50mm and length is approximately 250mm. O.D. of inlet and outlet is 22mm. Available modified with #15 Ace-Thred inlet/outlet for use with Ace-Safe tubing connectors.

  • Vacuum Check Valve

    Thermo Scientific Nalgene

    Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

  • Two-Piece Vacuum Traps with Hose Connection

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.

  • Metal Quick Disconnect Couplings

    Bel-Art - SP Scienceware

    …liquid and gas connectors in biomedical instrumentation and general industrial applications Hose barb ends accept flexible tubing Chrome plated valves provide dependable operation Operate at temperatures to 82°C (180°F), pressures to 1.7 Mpa (250 psi), and vacuum to 30 microns of…

  • Scienceware® Quick Connectors

    Bel-Art - SP Scienceware

    Fits tubing from 3 to 12,, (1/8 to 1/2") I.D. Two barbed polyethylene connectors that assemble tightly together with a male-female center taper Useful in connecting and disconnecting vacuum lines and other tubing assemblies All sizes are interchangeable with others, making for reducing…

  • …and FETFE O-Rings. Ultimate vacuum of 10 - 7 can be realized with standard three O-Rings. Supplied with Ace-Safe Serrated Connector for one end to connect vacuum line. Complete consists of Glass Manifold, End Plug with FETFE O-Ring, and "Ace-Safe" Connectors with bushing for tubing connection.

  • Polypropylene Check Valves

    Bel-Art - SP Scienceware

    Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted. Useful when connecting a vacuum line to a filter flask Recommended maximum pressure 20psi (1034 Torr) Autoclavable

  • Scienceware® PTFE Thermometer Adapters

    Bel-Art - SP Scienceware

    …adapter or vacuum adapter. Thermometer adapter has threaded cap with port to take thermometer, glass tubing or similar objects, up to 6 mm o.d. Viton® O-rings seal against thermometer and against mouth of body. Vacuum adapter has serrated Teflon tubing connector, 1/16 o.d. Connector screws into…

  • Vacuum Aspirator Collection System

    Bel-Art - SP Scienceware

    …bottle features heavy wall construction and a safety release vent to prevent vacuum implosion Replaceable hydrophobic filter protects the pump motor from fluid contamination Collection bottle, lid, tubing and connectors are all autoclavable at 121°C; all held within a polypropylene pump…

  • Manifold, Vacuum

    Ace Glass

    …4mm straight bore PTFE stopcock sampling ports. (Additional ports can be ordered.) Overall length of glass manifold is 230mm. Complete item consists of 8763 Glass Manifold, 5846-48 End Plug with FETFE O-Ring, and 5853-18 and 5853-21 Ace-Safe Connector with bushing for 1/4" or 1/2" tubing connection.

  • …adjustable Inner Tube and Nylon Bushing with FETFE O-Ring. Available with optional threaded tubing adapters (-75,-78), or modified with #15 Ace-Threds on inlet/outlet for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach tubing to serrated end of…

  • …Kit includes 1/4" ID and 1/2" ID vacuum tubing, each 48" long, two each 1/4" and 1/2" tubing clamps; 1/4" to 1/2" barbed reducer Kit allows connection of the Desiccator's 1/4" diameter brass needle valve to an accessory pump with 1/2" connector

  • Reusable PTFE sleeve with knurled, reinforced gripping ring for easy removal. Sleeve has reinforcement ribs on the outer surface that provide a vacuum tight seal to 1 mbar and also prevent the sleeve from sticking. Sleeve is .008in thick.

  • Tubing can remain permanently attached since the opposite end is designed to be easily assembled via a positive threaded seal Proper positioning of the connector provides greater flask stability, as tubing angled downward has less tendency to tilt the flask Flasks are designed for vacuum to…

  • With tooled neck for uniform stopper fit. Side hose connection is #11 Ace-Thred that accepts a PTFE Tubing Connector with silicone O-Ring and Nylon bushing to make an easier, safer, more convenient vacuum hose connection. Two connectors are available:

  • Connectors, Tubing

    Ace Glass

    Small tubing connector comprised of a TFE, 1/4"-28 UNF 2B male nut and a Kel-F wedge insert. Designed for use with our 5838 Chromatography adapters, 1.5-2mm ID tubing won't slip off or blow out during vacuum or pressure applcations. Easily assembled wi

  • … Closed system connection, with inlet dispersion chamber and 11 mm O.D. inlet/outlet connections. Open-type holder Full-area inlet (11 mm O.D.) for open atmosphere sampling. Threaded outlet (11 mm O.D.) tubing connectors fit Millipore flow-limiting orifices to control timed sample volumes.

  • Air Pump

    Gast

    …aluminum cylinder and piston parts Equipped with safety pressure relief valve, intake filter and moisture trap, vacuum and pressure gauges, serrated tubing connector on inlet and outlet and carrying handle. Mounted on rubber suction feet. UL approved. Overall size: 14.75” x…

  • LDPE Check Valves

    Bel-Art - SP Scienceware

    Ensure one-way directional flow in vacuum lines with these polyethylene plastic check valves. Operate positively; instantly blocks flow if direction changes Built-in arrows indicate direction of free flow Neoprene disk, no metal Maximum operating pressure is 20psi

  • …048177, 1L receiving flask, receiving flask clip, stopcock, PTFE fill tubes, and set of GL-14 hose connections and caps, AND distribution head, distribution head shut off tap, reflux screw cap accessory, vacuum connector 1230E22 - Glass Assembly A Verical Condenser BY with additional…

  • Vacuum Pump

    Dynalon

    … For generating vacuum and extracting liquids and vapors*. Designed for excellent performance: Very low water consumption, constant ultimate pressure and high suction capacity . Pump fluid: water Overall length: approximately 210 mm (R 3/4'' connector fitted) High…

  • …of 14.7 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Complete Vacuum Traps with 3/8" Hose Connections

    Wilmad-LabGlass - SP Scienceware

    Widely used to protect vacuum pumps from contamination, these borosilicate glass vacuum traps are a one piece unit with two 3/8" hose connectors. Connectors are 180° apart to ease connection of heavy wall rubber tubing used in basic vacuum set-ups. These traps are frequently used with…

  • Tube 19/22

    Corning

    These PYREX® 105° angle vacuum connecting adapters have a tubulation of 10mm O.D. for attaching to a vacuum pump and inner and outer 19/22 Standard Taper joints. Includes a drip-tip on the inner tube. These tubes are also replacement parts for organic chemistry kits (7177U65) and…

  • Rotating ball joint seal gives vacuum-tight connection good into the micron range. Ultimate vacuum is determined primarily by the tightness of the vinyl tubing connector which fastens the unground shaft to the ball member. Operate below 500 rpm. Use with unground stirring shafts (8134,9530).…

  • Omni-Fit Valve NMR System

    Wilmad-LabGlass - SP Scienceware

    …and a vacuum connector Omni-Fit Sample tubes (507-OF-7) sold separately Additional septum (OF-30) are available in packages of 6 Due to the nature of glass, Extreme Caution should be exercised when using at elevated or reduced pressures as performance of tubes under pressure or vacuum

  • vacuum and pressure work Air flow maintained by pumping action of a neoprene diaphragm, driven by air-cooled, induction-type motor Cast aluminum base and pump housing Free air capacity 3.6 Lpm and vacuum 12” Hg 120 V, 60 Hz; connectors take 1/4-inch i.d. tubing. Repair…

  • The Blot Washer

    IBI Scientific

    …Blot Washer system comes with the pump/module, 4L wash bottle with cap, 4L waste bottle with cap, mini blot tray, standard blot tray, vacuum tube with connectors, dispense manifold, aspirate manifold, power cord, and operation manual. The pump/control unit contains a microprocessor and software…

  • …and precious metals recovery. All plates are supported by a multiple ring grid to prevent displacement under vacuum. Vacuum connector fitting accepts 12.7mm (1/2") I.D. tubing. The tube fitting is fixed on the 260mm (10.25") funnel and threads into 3/4" diameter NPT bung on all other…

  • …and precious metals recovery. All plates are supported by a multiple ring grid to prevent displacement under vacuum. Vacuum connector fitting accepts 12.7mm (1/2") I.D. tubing. The tube fitting is fixed on the 260mm (10.25") funnel and threads into 3/4" diameter NPT bung on all other…

  • …with a cloth or paper filter. All plates are supported by a multiple ring grid to prevent displacement under vacuum. Vacuum connector fitting accepts 12.7mm (1/2") I.D. tubing. The tube fitting is fixed on the 260mm (10.25") funnel and threads into 3/4" diameter NPT bung on all other…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.