Vacuum Grease

Translucent silicone lubricant with high film strength, especially developed for making effective seals in vacuum systems operating at pressures less than 10 -6 mm Hg (10 -4 kPa) Inert, non-toxic, insoluble in water and resistant to most acids, alkalies and other corrosive chemicals …

…properties; for contamination-free use and better vacuums Silicone-free- no migration or contamination Excellent lubrication Easy application and cleaning Stable, chemically inert and non-toxic; fully compatible with most modern vacuum components APIEZON H Wide temperature range usable…

Synonym(s): Grease for vacuum lines; Stopcock grease

The Agilent Technologies 25 g high vacuum grease with extreme temperature resistance is used in high and ultra high vacuum of chemical processing equipments. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

…used with confidence in extreme environments, ultra high vacuum conditions and in the presence of gaseous and liquid oxygen at elevated temperatures. The branched perfluoropolyether base oil and PTFE thickener facilitate the grease’s excellent lubricity and chemical inertness across its…

Agilent LC/MS preventive maintenance kits contain supplies commonly recommended to maintain Agilent LC/MS systems. Agilent also provides a range of specialized cleaning supplies including cloths, swabs, and dielectric capillary cleaning powder, to help your ensure systems operate at peak…

…and prevents contamination of adjacent surfaces Including corrosion of small metal fastenings. Anti-Seize Vacuum Grease Non-hazardous Solvent resistant General purpose vacuum grease for vapor pressure of -5 mm Hg at 20°C. Melting point >200°C. Working temperature range -40 to +180°C.…

MDL Number: MFCD00148382

MDL Number: MFCD00148382

Seals and prevents freezing of stopcocks and ground-glass joints in high-vacuum systems at pressures less than 10-6 mm Hg. Heat stable (-40 to 260 C), low vapor pressure, and chemically resistant. Colorless. 5.3 oz. tube. Legal Information: Dow Corning is a registered trademark of The Dow…

For low vapor pressure sealing and lubrication in high vacuum applications. Legal Information: Apiezon is a registered trademark of M & I Materials Ltd.

The Fischer Technical silicone lubricating grease is suitable for use with vacuum pumps. It is made of high quality material which ensures long lasting usage. It is easy to handle and convenient to use.

Similiar to Krytox 240 AC, except used as high-vacuum grease. 2 oz. tube. R: 36/37/38 S: 26-36 Legal Information: Krytox is a registered trademark of E. I. du Pont de Nemours and Company

…any greasing. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. Autoclavable at 120°C for fifteen minutes. Non-vacuum desiccators are physically the same as vacuum desiccators; only difference is the absence of stopcock. Grease should…

These borosilicate glass Schlenk sample tubes incorporate a grease-free high vacuum 0-4mm valve and are suited for pressure/vacuum applications. Ideal for reaction and storage of air-sensitive compounds. Sidearm can be connected to inert atmosphere/vacuum source or a manifold.

Similar to CG-4515 traps but having an o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum tight, grease free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Serrated hose connections are 13.5mm at the smallest serration…

…oil becomes milky or cloudy. High Vacuum Grease This vacuum grease helps provide a proper seal between the vacuum pump plate and the bell jar so that high vacuum pressures can be achieved. "The Tank" Oil Change System All vacuum pumps require changing oil after every…

…substances. Compatible with any common desiccant. Porcelain plate, ground glass flanges. Rated to 9.6 PSI vacuum when properly cleaned and greased. Available from 100mm (XS) to 300mm (XL). Also available in Light-Blocking Amber. In collaboration with Borosil…

…Vacuum Tubing The Fischer Technical High Vacuum Tubing has an ID of 1/2" and can withstand 25 microns of pressure. High Vacuum Pump Oil Fischer Technical High Vacuum Pump Oil is available by the quart in packs of two or cases of twelve. High Vacuum Grease This vacuum grease…

…items.  These high strength desiccators will hold a full vacuum (29” Hg, 737 mm) at room temperature for 24 hours and remain airtight even if not under vacuum. The included gasket, with an application of vacuum grease assures a tight seal down to 0°C. The polypropylene stopcock…

…finger tube positions in center neck and is held by a plastic bushing to a threaded condenser flask. All joints are PTFE-Clad to eliminate the use of grease and still avoid freezing. Kettle flange has a groove for a CAPFE O-Ring. Quick Release clamp secures head & kettle. Complete consists of Kettle…

Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the middle for easy lifting. …

These All Clear Polycarbonate (PC) Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the…

…unground joints or temporary additions to vacuum systems. Vapor pressure 1 x 10 -4 mm Hg. Softening point: 45°C. Site of application should remain between -10 and +30°C. For the rigid permanent or semi-permanent sealing of joints in high vacuum systems down to 4.5 x 10 -9 mm Hg @…

Two-piece vacuum trap with #15 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation when used with either the AF-0060 or AF-0061 manifolds. Trap body is 57mm OD x 300mm in length to be used…

Best for use with applications involving solvents or solvents outgassing. Resistant to: many hydrocarbons, fats, oils, greases, hydraulic fluids, chemicals. Attacked by: ozone (except PVC blends), ketones, esters, aldehydes, chlorinated and nitro hydrocarbons. Formerly Part# 100049.

Flexible and compact, this 4-port line is constructed using CG-474-02, 4mm double oblique hollow high vacuum greased stopcocks on all four ports. Ports are fitted with two 14/20 inner joints and two 24/40 inner joints and are spaced 5" center to center. This configuration permits use directly…

…rod bracing to vacuum bank. Large ID of vacuum bank (40mm) provides for a substantial reservoir to quickly evacuate vessels up to 1000ml. End of the vacuum bank has a 35/25 ball joint and is supplied with a 35/25 socket joint cap style stopper to help prevent induction of grease into line. A valved…

Eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, bell jars, etc. Provides a vacuum-tight seal, yet will release readily even after long periods of time.

Eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, bell jars, etc. Provides a vacuum-tight seal, yet will release readily even after long periods of time.

The J. Young high-vacuum PTFE valve helps in controlling the atmosphere when using air-sensitive materials.Features: •PTFE piston with unique PTFE-sheathed elastomer O-ring seals •Grease-free glass-to-PTFE seals •High-vacuum to 10-6 torr

Maintain an airtight seal on the Thermo Scientific™ Nalgene™ Transparent Polycarbonate Classic Design Desiccator without the need of vacuum grease which can act as a possible lab contaminant. Lightweight and nearly unbreakable, the desiccator can be used under full-vacuum and non-vacuum…