Sterile Dilution Water

Compare Tool

Select up to 3 products

Sterile Dilution Water
1 - 32 of 77
Sort
View
Show
  • …into a sterile blender jar and add 90 ml of sterile Maximum Recovery Diluent. Operate the blender at 15,000 to 20,000 revolutions per minute. Transfer 1 ml of it to 9 ml of sterile diluent within 15 minutes and mix well. It will be 10 -1 dilution. Appropriate serial dilutions can be prepared…

  • Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety of buffers and solutions available from Hardy Vials are made of sturdy polypropylene with a leak-proof seal that holds up even during air…

  • water, 0.2 micron sterile filtered and steam sterilized in final packaging. Balanced salt solution used in many biomolecular applications. Ultra pure quality makes buffer ideal for use in a variety of cell culture procedures, such as washing and transporting cells or tissue samples, diluting

  • Peptone water meets or exceeds requirements for CFTA, EPA, USP, and APHA in cosmetics, pharmaceutical, and water industries. Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety of buffers…

  • Phosphate Buffered Dil Water/MgCl2

    Northeast Laboratory Services

    Physiological Saline and Phosphate Buffered Saline are used as isotonic diluents or bacterial suspensions. Sterilized Water is used for serial dilutions of suspensions.

  • Saline 0.85%

    Northeast Laboratory Services

    Physiological Saline and Phosphate Buffered Saline are used as isotonic diluents or bacterial suspensions. Sterilized Water is used for serial dilutions of suspensions.

  • water, 0.2 micron sterile filtered and steam sterilized in final packaging. Balanced salt solution used in many biomolecular applications. Ultra pure quality makes buffer ideal for use in a variety of cell culture procedures, such as washing and transporting cells or tissue samples, diluting

  • …use only. Butterfield's Buffer is used as a diluent for the preparation of dilutions for sample dilution of water, dairy products, and foods prior to microbiological testing processes. It may also is used to dilute “washed” samples of cattle or swine to be tested for generic E. coli.…

  • …magnesium chloride meets or exceeds requirements for APHA, EPA water and wastewater methods, and the dairy industry. The pH is 7.2 +/- 0.2 Pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety…

  • Prefilled Dilution Buffers

    GVS Filter Technology

    For sample dilution of water, dairy products, foods and pharmaceuticals prior to microbiological testing Prefilled and sterile Easy open flip-top container Tamper-evident seal Butterfield’s Buffer, pH 7.2 ±0.2, contains monobasic potassium phosphate and is used…

  • AquaPur™ ST is sterile purified water for use in dilution of sterile disinfectants, manufacturing, general laboratory and cleanroom applications. Purified water is filtered to 0.2µm, irradiated to a SAL 10-6 and tested for sterility and endotoxin using current USP method. Meets USP and…

  • …and the job is done in minutes. Optional on all Pico units are safer and more environmentally friendly mercury-free UV sterilizers to help maintain the integrity of stored water. Features: Patent pending design for whisper quiet, vibration-free operation Compact design…

  • Cell Culture Grade Water

    Quality Biological

    …Free, Sterile QBI's Cell Culture Grade Water is high quality water for use as a solvent in the preparation of cell culture media and laboratory reagents. Available in many sizes to meet your needs, QBI's Cell Culture Grade Water for Cell Culture features: Water For Injection…

  • Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries Vials are made of sturdy polypropylene with a leak-proof seal that holds up even during air transport. Wide 45mm opening accommodates bulky samples. Also features plenty of head space for large…

  • …disaggregation and subcultivation procedures since it does not damage cell membranes. Dissolve the lyophilized enzyme in sterile water to 5 mg/mL. Further dilution with sterile PBS (Ca 2+ /Mg 2+ free). One unit is the amount of enzyme which liberates 1.0 µmole of Tyr per minute at…

  • MOPS

    IBI Scientific

    …contamination free. Use sterile water to dilute 10X solution. Store at room temperature. To Produce 1X MOPS Solution (0.2M): Simply Add 4.18gm of MOPS to 1L of Sterilized Water. To Produce 10X MOPS Solution (0.2M): Simply Add 41.8gm of MOPS to 1L of Sterilized Water. Irritant. Avoid…

  • …°C. Prepare appropriate aliquots and avoid repeated freezing and thawing. Reconstitution: The insulin-transferrin-sodiu m selenite supplement should be reconstituted in 5 ml or 25 ml sterile double-dist. water (1000 x concentrated stock solution). Further dilution with culture medium.

  • …acids and ammonium sulfate in 100 mL of cold distilled water. Include desired nitrogen and carbon sources. 2. Warm if necessary to solubilize and sterilize by filtration. Store 10× stock solution at 2-8-á°C. To use, dilute 1:10 with sterile distilled water under aspetic conditions.

  • …has to be determined individually. For optimal activity the enzyme needs 5 mM Mg 2+ . Reconstitution: Reconstitute the lyophylizate in sterile double-distilled water (10 mg/ml); further dilution with PBS (phosphate buffered saline), HBSS (Hank′s Balanced Salt Solution) or medium.

  • …is stable for 2 weeks at 2 to 8 °C or for several months when stored in aliquots at -15 to -25 °C. Reconstitution: PHA-M should be reconstituted in sterile double-dist. water (final concentration: 2–10 mg/ml). Further dilution with medium or PBS (phosphate buffered saline).

  • …This premium detergent has been specifically designed for automation cleaning (CIP) requirements. Its unique formulation of chelating agents, Water for Injection, potassium hydroxide, a unique propriety dual surfactant system, and other critically essential cleaning agents provides a stabilized…

  • …highly built and stabilized formula helps to reduce corrosion, pitting, and rusting. Its unique formulation of phosphoric acid, chelating agents, Water for Injection, unique proprietary surfactants, and other critically essential cleaning ingredients is capable of cleaning a multitude of product and…

  • …distilled water. Add 5 grams dextrose or an equivalent amount of other carbohydrate and other chemicals like amino acids that modify growth of yeasts as desired. Ensure complete solution and sterilize by filtration. For use, dilute 0.5 ml 10X medium to make 5 ml with sterile distilled water. Mix…

  • …-15 to -25 °C. Note: Avoid repeated freezing and thawing. Reconstitution: Reconstitute in sterile double-distilled water (final concentration 10 mg/ml), further dilution with PBS (phosphate buffered saline) or medium containing 1 mg/ml (0.1%) BSA (bovine serum albumin) [or HSA…

  • …the vial to ensure full recovery of the protein into solution. It is recommended to reconstitute the lyophilized product with sterile water, which can then be further diluted to other aqueous solutions. Preparation Note: Centrifuge the vial prior to opening. Other Notes: MGLECDGKVN ICCKKQFFVS…

  • …disinfection efficacy is required. Diluted one ounce per gallon of water (1:128), LopHene II is a biological decontamination product and disinfection. It is effective against a wide range of bacteria, viruses, and fungi, including TB and HIV-1. High soil-load and hard water tolerance. LopHene II can…

  • …of 0.5 to 20 ng/ml. Recommended concentration for serum-free cell culture is 1 to 10 ng/ml Working solution: In sterile water (final concentration: 500 μg/ml), further dilution with medium or PBS (phosphate buffered saline) containing 1 mg/ml BSA (bovine serum albumin), or 1 to 10% serum. …

  • …with a perforated red tear strip. Hardy's Dilu-Loks eliminate the time and money spent on preparing your own dilution vials! Available with peptone water, buffered peptone water, butterfield's buffer, deionized water, phosphate buffer with MgCl, and as an empty sterile container.

  • …surfaces.  At a use dilution of rate of 0.8% v/v (1:128), the Vesphene III Disinfectants kill a broad spectrum of common bacteria and fungi.  The One Solution st Vesphene III System Pre-measured WFI combines a sterile unit dose pouch with a gallon of USP Water For Injection…

  • …of solution from the serum vial to a dilution vessel if required. Further dilute to desired concentration using sterile 0.25% Acetic Acid solution. A typical working concentration may range from 1 to 50 mug/ml.4. Add appropriate amount of diluted tropoelastin material to the culture surface.5.…

  • …to be effective in hard (400 ppm as CaCO3) or soft water and in the presence of 5% organic soil. The use-dilution of this product is specifically formulated to clean, disinfect, and deodorize in a simple one step process. Dilute with tap water as dispensed. LpH se Concentrated Germicidal Detergent…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.