Stainless Steel Sampler

Compare Tool

Select up to 3 products

Stainless Steel Sampler
1 - 32 of 53
  • Sampler Liquid CupSampler


    …is possible to carry out point sampling of liquids of varying viscosity with the stainless steel Liquid CupSampler AISI 316L (1.4404). Media-containing particles can also be sampled without difficulty. The sampler can be used in the fields of chemistry, foodstuffs and cosmetics. The cup can be…

  • MicroSampler


    …MicroSampler are interchangeable. This means that tips with different volumes can be used. Point sampling Various lengths and volumes are available Tip can be removed, easy cleaning Stainless steel AISI 316L (1.4404) Sterilisable Additional tips are available in different sizes

  • Slot Samplers

    Sampling Systems

    …the sampler can be easily flushed through. It is an ideal sampling tool for sampling from kegs, containers and most vessels. Made from high quality 316L stainless steel for superior chemical resistance Bright polish finish exterior with a satin internal finish Wide range of sampler

  • Melting Pot Ladle

    Gilson Co. Inc.

    Stainless steel ladle holds 8oz (237mL) or 0.25qt (0.24L) for transferring molten capping compound.

  • Tank Sampler


    Screw the two sections together and lower the unit to the specific depth required (the sampler is marked in 1 ft. (.3 m) increments.) Pull and hold the stainless steel wire at the top, figure A, which opens the valve, figure B, allowing the liquid to flow in. Release the wire allowing the…

  • Sampling lance Milky


    sampler made of stainless steel AISI 316L (1.4404). Developed initially for milk powder samples, conforms to standards of DIN and IDF (International Dairy Federation). The collector is inserted into bags or casks and the sample is removed using a semi-circular profile lance. Stainless steel

  • Scienceware® Three Zone Powder Sampler

    Bel-Art Products

    …powders, pellets and other friable materials which may become non-homogeneous in bags, this three zone sampler is invaluable. The steel point is inserted through the bag wall. When the sampler is in deep enough to cover the three cells, a half turn of the handle allows samples to enter. The handle…

  • Multipro Sector Probe 55G

    Bioscience International

    …use: trucks, bulk containers, silos. Has penetrating, stainless steel tip that can be sterilized. To use, the “T” handle is turned to close the cells and the steel point is inserted through the bag wall or the commodity. When the sampler is deep enough to cover the different sectors, the…

  • StickProof


    Sampler for powder in the pharma area, made of stainless steel AISI 316L, material 1.4404. The especially slender tip can be inserted easily and deeply in order to take the sample. The conical inlet of the tip allows the collection of either very small or larger quantities. StickProof is constructed…

  • SiloPicker


    The SiloPicker is ideal for taking bulk goods samples from silos. Using the extension rods, samples can be taken from depths down to 3.5 m. The insertion depth depends on the density of the bulk goods. Stainless steel AISI 316L (1.4404)

  • Uno Samplers


    Uno sampler made of stainless steel AISI 316L (1.4404)/PTFE with a closed sample chamber for point sampling from a predetermined sampling depth. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be…

  • Bomb Sampler, SS, Type 302, 500 mL

    DWK Life Sciences (Wheaton)

    …liquid samples from storage tanks, ponds, wells, etc. Permits collection at various depths Constructed of corrosion-resistant stainless steel, Type 302 Plunger can be activated by bumping unit on tank bottom or at any depth means of a second cord. A weighted plunger with Viton…

  • Scienceware® Ellipso-Spoon® and Spatula Samplers

    Bel-Art Products

    …and thick liquids are easily retrieved. Autoclavable. Offset, deep spoon end retrieves material from the corners of bottles and containers Spatula end scrapes and breaks up caked powders Sampled materials never fall back into the container Polished 304 grade stainless steel

  • TeleScoop Sampling System


    …versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net) are attached to the telescopic rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open…

  • Grab Sampler III

    DWK Life Sciences (Wheaton)

    …design Six foot modular sections Use when sampling hazardous and corrosive materials, as well as waste water. Chemically resistant stainless steel and polypropylene construction. Wide mouth accepts light sludges and slurries. Modular design uses 6-foot add-on sections. Fits wide-mouth…

  • Surgel Cylindrical Probe

    Bioscience International

    Constructed of stainless steel Standard connection for use with electric drill Sterilizable For use in obtaining proper sampling results of frozen products packed in bulk. Applications: frozen goods; sites of use: food industry, health authority. To use, the probe is fixed to an…

  • Ohaus Scoops


    Polypropylene Maxi-Scoop 10 in dia x 2.5 in deep (25.4 cm dia x 6.4 cm deep) with pouring spout, weight 145g Scoop, Stainless Steel, footed, large (17.2 x 11 x 3.4 in / 44 x 28 x 8.5 cm)

  • Stainless Steel Scoop

    Polarware Company

    Lab/utility scoop Bowl capacity: 40 oz. Heavy-duty scoop has a seamless body and strong tubular handle for easy handling and cleaning. Bowl dimensions: 5” x 7-1/2”. Overall length: 12”.

  • Soil Gas Passive Air Sampling Kits


    …canister. Individual replacement parts are available, providing a cost-effective alternative to replacing the entire sampler. Assembled sampler includes: Stainless steel tee with orifice Variety of orifice sizes for sampling from 4 minutes to 10 hours 1-1/2" vacuum gauge…

  • Sampler Tubus


    Sampler for pourable bulk goods up to approx. 1 cm in diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks. Also for coarse-grained bulk goods Made of stainless steel AISI 316L (1.4404) Special geometry of the tip

  • SAS Super 100 & 180 Microbial Air Samplers

    Bioscience International

    …plotted according to EN45001 specifications NIST traceable certificate of calibration with all units Certified, autoclavable AISI 316 stainless steel aspirating head - each head is particle emission free for clean rooms, autoclavable, and certified with laser-engraved serial number Multiple…

  • Stainless Steel Balance Spoons

    Bel-Art Products

    Easily transfer small quantities of materials with this trough-style spoon. Available in plain, polished stainless steel or with Teflon® FEP coating 17cm (6.7") length useful for reaching into containers Square trough-type spoon end: 44 x 8.9mm (1.75 x 0.35")

  • SteriWare® Disposable Powder Sampler

    Sampling Systems

    The Steriware Powder Sampler is a very popular single use powder sampler, which continues to be a leading device in its field. Constructed from FDA conforming HDPE, the Steriware Powder Samplers are individually bagged in a cleanroom and sold in quantities of 20. Their simple operation allows…

  • Visiprep™ Large Volume Sampler for use with 3 or 6 mL SPE tubes (includes 4…


    …these samplers. The other sampler has four tube adapters for 3mL or 6mL SPE tubes. To simultaneously extract 12 samples, three samplers are required. The samplers consist of 1/8-inch PTFE tubing with a screw fitting at one end and a stainless steel weight at the other end. To use the sampler,

  • Storm Water Samplers

    Thermo Scientific Nalgene

    …the mounting tube using the stainless steel worm clamp. Position once, and reload with disposable HDPE or glass samplers. Complete installation instructions included. Kit includes UV stabilized high-density polyethylene tube, 24 in. steel stake, stainless steel worm clamp and lanyard, nylon…

  • Bottom Sampling Dredge


    Stainless steel sampler is designed for use on soft bottoms (sand or silt). A simple trigger holds the sampler open while lowering to cover a uniform area. Scissor design closes sampler, retrieving a volume of sediment to the surface for analysis.

  • Fluid Sampling Kit


    …before sampling. The Fluid Sampling Kit is a complete solution for field-based fluid collection and contamination analysis. The stainless steel sampler assembly plugs into a quick-release valve installed in the system line, which allows a measured quantity of liquid to pass through the…

  • Sub Surface Grab Sampler® II

    DWK Life Sciences (Wheaton)

    …Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an aluminum pole assembly with a golden alodine finish Provided with a 1000mL narrow-mouth borosilicate…

  • Sampling & Measurement Outfit


    …gear and measurement devices all housed within a rugged field carrying case for easy transport and storage. Outfit Includes: Stainless Steel Bottom Sampling Dredge (1097) Plankton Net (1063) Sounding Lead and Calibrated Line (1064-G) Armored Thermometer (1066) Water Sampling…

  • Semi-Micro Spoon

    GSC International, Inc.

    Stainless steel semi micro spoon, 6.5 inches overall length

  • Economical Bowls

    United Scientific Supplies

    Economical Bowls are constructed from 204Cu Stainless Steel for corrosion resistance at a lower cost.  Bowls features a polished mirror surface foreasy mixing and cleaning.  Can withstand temperatrues up to 1400°F (760°C). Meets NSF standards.

  • All-Layer-Scratcher


    …using a scraper. Sliding PTFE separators are used to divide the inner tube into different zones. The separators also prevent the sample from being mixed. For caked bulked goods Zones can be varied due to moveable PTFE separators. Made of stainless steel AISI 316L (1.4404) and PTFE

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.