Specific Gravity Standards

Compare Tool

Select up to 3 products

Specific Gravity Standards
1 - 32 of 88
Sort
View
Show
  • Hubbard Specific Gravity Bottle

    Wilmad-LabGlass - SP Scienceware

    This borosilicate glass specific gravity bottle is used in standard test methods for specific gravity of a variety of semi solid materials and emulsions, such as asphalt cements, road tars, road oils, and soft tar pitches. The solid Standard Taper stopper has a hole approximately 1.6mm in diameter…

  • Thomas Specific Gravity Bottles (Pycnometers)

    Thomas®

    Gay-Lussac With capillary glass stopper ground to flat-sided point for take-off of overflow 10 mL and 25 mL sizes are for ASTM Standard D 369 and Barrett test H-8; AASHTO standard T-74  

  • Gay-Lussac Specific Gravity Bottles

    Wilmad-LabGlass - SP Scienceware

    These unadjusted borosilicate glass specific gravity bottles determine the density of liquid samples. They have capillary stoppers, and ground Standard Taper joints to reduce evaporation.

  • Bottle, Specific Gravity

    Ace Glass

    Conical shape flask for maximum stability. Supplied with yellow back thermometers for accurate reading. Thermometer has a range of 14 to 37 degree C, 0.2 subdivisions with standard taper 10/18 joint.The 50 mL size complies with ASTM Method of Test D 15

  • Specific Gravity Std, 1.30

    Ricca Chemical

  • Specific Gravity Std, 1.10

    Ricca Chemical

  • Specific Gravity Std, 1.50

    Ricca Chemical

  • Specific Gravity Bottles, Pycnometers, Medium Length

    DWK Life Sciences (Kimble)

    …length Ts 10/18 thermometer with a range of 14 to 38°C in 0.2° Accuracy within ±0.2°C Cap for the side tube is Standard Taper 5/12 and has small vent near the top Each flask body is numbered for easy identification The 50 mL size is used to obtain the specific gravity of pigments (ASTM D 153).

  • Le Chatelier Specific Gravity Bottle

    Wilmad-LabGlass - SP Scienceware

    Used to determine the specific gravity/density of sand, cement and other fine materials, this borosilicate glass specific gravity bottle is developed from ASTM C 188 and ASTM E 694. The body holds approximately 250mL and the capacity of the oval bulb in the neck is 17mL. Volume below the bulb is…

  • Gay-Lussac Adjusted Specific Gravity Bottles

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass specific gravity bottles are accurately adjusted at 20°C to determine the density of liquid samples. While the joints have Standard Taper dimensions, the capillary stoppers are not interchangeable since the final adjustment for volume is made on the stopper. Each bottle…

  • DURAC® Specific Gravity Plain Form Hydrometers

    Thomas®

    …ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST and DKD/PTB. Temperature of Standardization 60°F/60°F. 6025C75 to 6025C59 are for liquids heavier than water. 6025C31 to 6025C51 are for liquids lighter than water.…

  • Specific Gravity Bottles, Pycnometers, Le Chatelier Type

    DWK Life Sciences (Kimble)

    KIMAX®, Le Chatelier type For the determination of the specific gravity of cement, sand and materials of similar fineness For ASTM Standards E 694 and C 188 Marked with “A” to signify adherence to accuracy specifications in U.S. Department of Commerce publication PB-246 623, The…

  • Thomas Baume & Specific Gravity Dual Hydrometers

    Thomas®

    specific gravity and 0.5° Baume divisions. Instruments are for liquids lighter than water and temperature of standardization is 60°F/60°F.  1234K68 has a specific gravity range of 0.690 to 0.800 and 43° to 70° Baume.  1234K69 has a range 0.790 to 0.900 specific gravity

  • Thomas Specific Gravity Plain Form Hydrometer

    Thomas®

    Liquids heavier than water Specific gravity plain form hydrometers cover a variety of ranges and are for liquids heavier than water. Plain form hydrometers measure 165mm (6.5”) length, have 0.005 divisions and temperature of standardization is 60°F/60°F. 1234K71 has a…

  • Hubbard-Carmick Specific Gravity Bottle, 25 mL, 24 / 12

    Corning

    For use with viscous fluids, semi-solid bitumens, emulsions, etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore …

  • DURAC Specific Gravity / Relative Density (g/cm3) Plain Form Hydrometers;…

    Thomas®

    These plain form hydrometers are available in a variety of models measuring specific gravity / relative density (g/cm 3 ) of liquids lighter and heavier than water in various ranges from 0.690 to 2.000. Commonly used in industries such as food and beverage, chemical, pharmacology,…

  • Specific Gravity Bottle, Serialized Pycnometer, with Non-Mercury Filled…

    DWK Life Sciences (Kimble)

    …facilities that are designated mercury-free. Bottles are designed with a special, medium length standard taper 10/18 joint and are retested for accuracy within ±0.2°C. Cap for side tube is medium length standard taper 5/12 and has a small vent near the top. Body is conical for maximum stability and…

  • DURAC Specific Gravity / Relative Density (g/cm3) Hydrometer Set with EnviroSafe…

    Thomas®

    This Hydrometer Set consists of eight DURAC® Specific Gravity / Relative Density (g/cm?) Plain Form Hydrometers for measuring specific gravity of heavy and light liquids in various ranges from 0.700 to 2.000. It also includes one Enviro-Safe® Total Immersion Thermometer to reference liquid…

  • H-B DURAC Safety Specific Gravity / Relative Density (g/cm3) Combined Form…

    H-B Instrument - SP Scienceware

    …form thermo-hydrometers offer the additional convenience of an enclosed thermometer with a temperature scale of 0/150°F, and measure specific gravity / relative density (g/cm 3 ) of a variety of liquids in various ranges from 0.600 to 2.000. Conform to the accuracy requirements for…

  • DURAC Specific Gravity / Relative Density (g/cm3) & Baume Plain Form Hydrometers…

    Thomas®

    …measure specific gravity / relative density (g/cm?) of liquids lighter and heavier than water in various ranges from 0.700 to 2.00, and Baume in various ranges from 10° to 70°. Lead free ballast and glass Individually serialized Temperature standardization: of 60°F…

  • H-B DURAC Specific Gravity / Relative Density (g/cm) Plain Form Hydrometers;…

    H-B Instrument - SP Scienceware

    These plain form hydrometers are available in a variety of models measuring specific gravity / relative density (g/cm) of liquids lighter and heavier than water in various ranges from 0.820 to 1.420. Commonly used in industries such as food and beverage, chemical, pharmacology,…

  • H-B DURAC Specific Gravity / Relative Density (g/cm3) Plastic Plain Form…

    H-B Instrument - SP Scienceware

    …measuring specific gravity / relative density (g/cm3) of a variety of liquids in various ranges from 1.0 to 1.620 Easy to read black scale on yellow back to help avoid eye fatigue 300mm (12”) long Lead free ballast Individually serialized Temperature standardization: 60°F…

  • H-B DURAC Specific Gravity / Relative Density (g/cm?) & Baume Plain Form…

    H-B Instrument - SP Scienceware

    …plain form hydrometers measure specific gravity / relative density (g/cm?) of liquids lighter and heavier than water from 0.700 to 2.00, and Baume from 10° to 70°. Lead free ballast and glass Individually serialized Temperature standardization: of 60°F (15°C) Hand…

  • Iron, 1 ppm, Standard Solution

    GFS Chemicals

    NFPA#: 1-0-1 Specific Gravity: 1.010 AA, colorimetric or volumetric standard

  • SULFAMIC ACID, Primary Standard

    GFS Chemicals

    NH2SO2OH F.W.: 97.10 NFPA#: 2-0-2 Specific Gravity: 0.000 DOT: 8/III

  • Quevenne Lactometer Comb

    Thermco

    Graduated in Specific Gravity and Degrees Quevenne For Whole or Skim Milk Temperature Standard 60°F/ 60°F Thermometer in Hydrometer Stem - Range 20 to 100’F Suitable for Certification

  • SULFAMIC ACID, CERTIFIED Primary Standard

    GFS Chemicals

    NH2SO2OH F.W.: 97.10 NFPA#: 2-0-2 Specific Gravity: 0.000 DOT: 8/III

  • Thermometer 10/25ml Bottle

    DWK Life Sciences (Kimble)

    Thermometer for use with specific gravity pycnometer 15123R-10 (8350F10 ) or 15123R-25 (8350F17 ). Medium length Standard Taper 10/18 thermometer with a range of 14 to 38 degrees C Subdivided in 0.2 degree C increments Accurate to ± 0.2 degrees C Caution: Contains…

  • Pycnometer, 10 mL

    DWK Life Sciences (Kimble)

    Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL size…

  • Weight per Gallon Cups

    BYK-Gardner

    …divided by 10 to obtain the weight in pounds per U. S. Standard Gallon. This weight per gallon is multiplied by 0.12 to obtain a specific gravity or the net weight of the cup can be divided by 83.2 for a direct conversion to specific gravity. The Midget Cup has a capacity of 8.32 grams of water…

  • Watermark® Karl Fischer Water Standard, 2.0mg/mL

    GFS Chemicals

    For volumetric or coulometric use. For standardization of titrants or titrators. Water Content 2.00 +/- 0.05 mg/mL NIST Traceable Specific Gravity approx. 0.86

  • StandARd® Platinum Cobalt Color Standard (APHA 500)

    Avantor - Macron Fine Chemicals™

    IMO: 8:3264 HTS Number: 3822005090 Specific Gravity: 1L = 1.00 Kg Management of Change: N

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.