Solvent Bottle Adapter

…All caps are autoclavable. Connect 1/16" or 1/8" ID flexible tubing or 1/16” OD semi-rigid tubing to caps with Luer adapters. Plug any unused ports with a Luer plug to ensure a closed system. Bottle thread adapter converts bottles with S40 threads to accept any GL45 thread caps.

…any dangerous solvent from escaping into the laboratory. Traps feature an indicator strip that changes color when saturated. Connect 1/16" or 1/8" ID flexible tubing or 1/16” OD semi-rigid tubing to caps with Luer adapters. Bottle thread adapter converts bottles with S40 threads…

…and precise dispensing of bases, saline solutions, acids and some organic solvents. Four adjustable volume sizes are available from 0.5ml to 50ml and they come with 5 adapters to fit the popular reagent bottles. You can dispense with it but you can't do without it! Features:…

…system 3 combines a three-hole cap, solvent bottle adapter and a combination inlet/sparge filter to eliminate the safety hazards of aluminum foil wrapped solvent containers. Solvent bottle adapter converts GL-45 mobile phase caps to standard 4 L solvent bottles for direct connection to an HPLC pump.…

…to fit your solvent container 10 port manifold—1 x 1/2" NPT(F), 3 x 1/4" NPT(F), and 6 x 1/4-28 UNF(F) Use the waste kits to minimize leaks, spills, and vapor escape from solvent waste containers. Waste kits include a 10-port manifold, exhaust filter, adapters, plugs, and…

…any dangerous solvent from escaping into the laboratory. Connect 1/16" or 1/8" ID flexible tubing or 1/16” OD semi-rigid tubing to caps with Luer adapters. Plug any unused ports with a Luer plug to ensure a closed system. Bottle thread adapter converts bottles with S40 threads…

…Caps 21942-82 and -83 are designed to fit plastic bottles These Q-series solvent caps ensure a leak-free, vapor-tight seal to protect lab staff from exposure to toxic fumes, prevent ingress of particulates, and prevent evaporation of solvent. Use the on/off valves to control the flow of each…

Mini solvent pump reliable filling of small quantities The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres. For reliable filling and dosing of solvents and readily flammable liquids. Simple principle - highly…

…Mini Solvent Pump is a high-quality hand pump for use with liquids and flammable media such as acetone, ethanol, isopropanol and methanol. Use with small containers such as bottles, canisters, carboys and tanks with GL45 threads, from 1 liter up to ~ 10 liters in size. Accessory thread adapters are…

…through-holes allowing 1/16" OD semi-rigid tubing to pass through into the bottle. Use 1/4"-28 UNF(M) fittings to connect other size semi-rigid tubing or use Dibafit™ PEEK™ thread-to-barb adapters to connect flexible tubing. Each port features a stainless steel thread insert to…

…various manifold cap sizes to fit your laboratory and industrial solvent waste containers. Bottle and carboy caps are available with polypropylene (PP) or PTFE manifolds and 4 or 10 variously sized ports. Ports accept male thread adapters to connect flexible and rigid tubing, or filter 12019-79 or…

Allow the use of the Mobi-Cap Top with 4-liter solvent bottles.

Allow the use of the Hub-Cap Top with GL-45 solvent bottles.

…harsh chemical solvents (including ethanol, DMSO, xylene). The labels have also been designed with perforations allowing one size to fit across a wide range of laboratory vessels including microcentrifuge tubes, cryovials, petri dishes, cell culture plates, and reagent bottles. The custom-built…

…Ideal for solvent recycling and other filter applications. All threaded apparatus eliminates need for clamps. Course glass fritted disc is interchangable. Gl80 wide mouth bottle with #15 Ace-Safe connector for vacuum connection on side. 1000mL glass funnel on top, all PTFE threaded center adapter.…

…distilled water Tolerates strong acids and bases Not recommended for use with most organic solvents Spigot closure is included. Closure size 63 mm; spout takes 5/8” i.d. tubing; serrated tubing adapter that takes 1/4” or 1/8” i.d. tubing is supplied Dimensions: 8 liter Lowboys…

…polyethylene or polypropylene cannot be used for solvents. The spigot StopCock PA is made of electrically conductive polyamide and therefore perfectly suitable for solvents. StopCock PA fits onto 3/4" outer threads and with the supplied adapter onto 3/4" inner threads and therefore…

…PVC tubing; polypropylene fill-tube; polypropylene adapter plug which is reversible to fit either size buret; and two size 63 polypropylene screw caps, one with central hole for tubing and one without hole. NOTE: not recommended for use with concentrated acids, concentrated bases or solvents.

…adapters for nearly any unpressurized container are available. Dispensette® S bottletop dispenser is supplied with performance certificate, telescoping filling tube, recirculation valve and recirculation tube (if specified), valve mounting tool and a selection of polypropylene adapters. Bottle…

…adapters for nearly any unpressurized container are available. Dispensette® S bottletop dispenser is supplied with performance certificate, telescoping filling tube, recirculation valve and recirculation tube (if specified), valve mounting tool and a selection of polypropylene adapters. Bottle…

…adapters for nearly any unpressurized container are available. Dispensette® S bottletop dispenser is supplied with performance certificate, telescoping filling tube, recirculation valve and recirculation tube (if specified), valve mounting tool and a selection of polypropylene adapters. Bottle…

…adapters for nearly any unpressurized container are available. Dispensette® S bottletop dispenser is supplied with performance certificate, telescoping filling tube, recirculation valve and recirculation tube (if specified), valve mounting tool and a selection of polypropylene adapters. Bottle…

…adapters for nearly any unpressurized container are available. Dispensette® S bottletop dispenser is supplied with performance certificate, telescoping filling tube, recirculation valve and recirculation tube (if specified), valve mounting tool and a selection of polypropylene adapters. Bottle…

…adapters for nearly any unpressurized container are available. Dispensette® S bottletop dispenser is supplied with performance certificate, telescoping filling tube, recirculation valve and recirculation tube (if specified), valve mounting tool and a selection of polypropylene adapters. Bottle…

…acids, bases and solvents. Valves have been optimized for reduced operating force and are simple to maintain to improve service life with crystallizing liquids. Floating piston design closes tolerances for smooth one-handed operation. Discharge tube may be rotated 360° so that bottle label faces…

…of wearing parts, extending instrument life. Mounts on Most Common Reagent Bottles The seripettor bottletop dispenser mounts on most common reagent bottles with its 45mm thread and 45/33mm and 45/38mm adapters. Sterile dispensing of media or agar may be performed with optional accessories. …

Safe, one-handed dispensing of organic solvents, concentrated acids and peroxides Dispensette® Organic dispensers are made of high-grade, chemically-resistant materials, making them an excellent choice for dispensing most organic solvents, concentrated acids (excluding hydrofluoric…

…membrane. Features & Benefits: Compatible with organic and aqueous solvents Ergonomic, clampless design Reduce contamination risk Filter directly into vacuum-rated storage bottles Easy access to membrane after filtration (membranes sold separately) Fully recyclable…

… Manifolds Manifolds are for lyophilizing multiple quantities of small samples in serum bottles or smaller flasks. Complete with neoprene valves, which accommodate both 1/2” and 3/4” adapters. Manifolds come in 10 or 20 port sizes with support shelves and 4 or 20 port sizes without…