Sample Holder

Compare Tool

Select up to 3 products

Sample Holder
1 - 32 of 256
Sort
View
Show

  • Whatman SPOT CloneSaver Holder

    GE Healthcare

    SPOT CloneSaver holder SPOT CloneSaver holder SPOT CloneSaver Holder is a rigid frame that allows automated spotting to standard CloneSaver Cards. It keeps the card flat for uniform and precise spotting of biological samples. The 96-well card is easily inserted into the ANSI/SBS-compatible frame,…

  • GE Filter Holder

    GVS Life Sciences

    …Filter holders can also be used for aseptic sampling of liquids or gases at point-of-use or when samples must be collected and analyzed on site. The 25 mm filter is used to filter up to 50 mL of sample and the 47 mm filter can filter up to one liter depending on the viscosity of the sample. The…

  • Open-Face Aerosol Filter Holder

    Advantec MFS

    This 47mm aerosol filter holder is open-face for environmental monitoring or sampling of open atmosphere air and gases. Use for particulate or bacterial analysis. Thermoplastic polymer Polypropylene (PP) construction makes this holder durable and compatible with a wide range of chemical…

  • In-Line Filter Holder

    Pall Life Sciences

    Lightweight Filter Holder for Particulate Sampling Domed inlet provides uniform sample distribution on the filter Delrin plastic offers broad chemical compatibility and material strength Accepts 25mm filter discs Lightweight for venting and air monitoring applications

  • 13mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …sizes  Concentrate samples in small area Borosilicate glass filter holder assembly for microanalysis of small volumes of liquids under vacuum. Filter biological samples or organic solvents. The holder utilizes a 25mm filter membrane yet concentrates the sample into a 13mm diameter…

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder offers an increased filtration area making it ideal for viscous samples and…

  • Filter Holder Manifolds

    MilliporeSigma

    Vacuum manifolds support simultaneous filtration of three or six test samples. Use Millipore glass, plastic or stainless steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at each…

  • 47mm Stainless Steel Vacuum Holder

    Advantec MFS

    …flame sterilized The 47mm Stainless Steel Holder for the microanalysis of liquids for biological or particulate contamination under vacuum filtration. The unbreakable 304ss unit may be flame sterilized to sanitize the holder between samples. The 500mL funnel connects to the base guided by…

  • Swinny Filter Holder

    MilliporeSigma

    …Steel 13 mm Filter Holder is designed to ultraclean or sterilize small volumes of liquids by pressure filtration. The filter holder is useful for sterilizing tissue culture media or ultracleaning HPLC samples, solvents, etc. Sample is introduced into the filter holder by a syringe connected…

  • Droplet™ Sample Storage Tray

    Heathrow

    Sample organization for the busy lab Hard wearing storage trays that can be used for specimen containers with the insert provided, of for general lab products without the insert. Lightweight and sturdy to hold up to 24 full specimen containers (up to 58 mm in diameter). Specimen…

  • Diskcover-47 Extraction Disk Holder

    Restek

    Compatible with most vacuum manifold systems that accept 1/8-inch male luer fittings Sample can be automatically introduced via 1/8-inch PTFE tubing or from the optional Diskcover-47 reservoir

  • 24 x 2mL All-Metal QuickPrep™ Sample Holder

    MP Biomedicals

    24 x 2 mL All-Metal QuickPrep™ Sample Holder is the strongest FastPrep adapter used for lysing highly contagious samples and samples suspected of harboring prions. Due to its ability for high temperature sterilization, this adapter is the safest solution for CNS tissue lysis and other…

  • Polypropylene In-Line Filter Holder

    Advantec MFS

    …11mm O.D. hose barb included. Use hand tightening only. Autoclavable. Applications: Ultraclean and sterilize liquids. Use for aseptic sampling of liquids or gases at point-of-use. Convenient in the field or laboratory. Please Note: ALL Advantec items have a maximum 48 hour cancellation…

  • Needle Holder

    Globe Scientific

    …disposable. The holder completes the blood collection assembly when combined with appropriate needles and evacuated blood collection tubes. Use it once and discard it with the needle attached. This eliminates the hazards associated with reusable needle holders. The needle holder fits both 13mm and…

  • Tedlar Air Sampling Bags

    SKC

    Impermeable to gases; low sample loss in storage Low memory of previous sample; can be reused Tough, flexible, fatigue-resistant Large sample port for flushing; three convenient eyelets These bags are fabricated from 2 mil thick PVF (Tedlar) film, a material that is inert…

  • 24 x 2mL QuickPrep™ 3 Sample Holder

    MP Biomedicals

    24 x 2mL QuickPrep 3 Sample Holder for use with FastPrep Homogenizers.

  • 12 x 15mL All-Metal TeenPrep™ Sample Holder

    MP Biomedicals

    Large scale sample holder with All-Metal construction. The TeenPrep All-Metal Adapter holds 12 x 15mL Lysing Matrix Tubes. This is the strongest FastPrep-24™ adapter, intended for the most difficult and long-lasting lysis applications. Due to its metal construction, it can be continuously run…

  • 2 x 50mL All-Metal BigPrep™ Sample Holder

    MP Biomedicals

    Large scale sample holder with All-Metal construction. The TeenPrep All-Metal Adapter holds 12 x 15mL Lysing Matrix Tubes. This is the strongest FastPrep-24™ adapter, intended for the most difficult and long-lasting lysis applications. Due to its metal construction, it can be continuously run…

  • TallFlex™ 48 x 4.5mL Sample Holder for FastPrep-96™

    MP Biomedicals

    …production. Isolation of natural products. Food preparation for quality analysis. Biopharma manufacturing. Forensic applications. Frozen samples in Lysing Matrix tubes, loaded in the adapter and stored frozen, are ready to be immediately processed with minimal hand-on manipulation, preventing…

  • SPME SAMPLING STAND HOLDER & EXTENSION

    MilliporeSigma

  • Resprep Sample Delivery System

    Restek

    Use the Resprep sample delivery system to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge, or to a disk on a vacuum manifold system for extraction or cleanup. Each unit consists of six transfer lines with a stainless steel weight on one…

  • Whirl-Pak® Stand-Up Sample Bags

    Nasco

    Stand-Up Sample Bags The Whirl-Pak® Stand-Up Bag makes sample handling and testing much easier because it gives users the ability to perform important laboratory functions with both hands, because the bag will stand completely by itself. No rack or other holder is needed to keep the bag upright.…

  • Racks, For Sample Cups

    Dynalon

    …For Sample Cup 50 Place (1212X86) Product Dimensions (l x w x h) : 8.625x4.562x1.562in Sample Cups Storage Modules: Module for 50 cups. Provides storage for fifty 13 mm sample cups in less than a square foot of space. Shelves are clear acrylic, base is white. Up to six holders can be…

  • FilterMate™ Cup Holder

    Environmental Express

    This machined HDPE fixture adds stability when performing FilterMate filtrations. The sample cup is placed into the center hole of the FilterMate holder prior to filtration. The holder secures the digestion cup as the FilterMate is depressed through the liquid sample.

  • AirChek XR5000 Sample Pump Kit

    SKC

    5-pack AirChek ® XR5000 Pump Kit, high flow and low flow sampling, with five each: XR5000 pumps with high-power Li-Ion battery, filter cassette holders, adjustable low flow holders, constant pressure controllers, protective Type A tube covers, (1) five-station Multi-charger, 100-240V, and one…

  • Pharmaceutical Punch and Die Holder

    Carver

    Permits off-line testing of pellet and tablet samples Holder works with standard BB2 production tooling in the Model C press. The set includes an anodized aluminum holding fixture, steel shims to adjust for various size samples and an anodized aluminum ejector.

  • Melting Point M-565 & Sample Loader M-569

    Buchi

    …requirements for sample processing in a non-regulated environment Professional Set: Melting Point M-565 Includes: Melting Point M-565 instrument, Sample Loader M-569, 100 melting capillaries, 10 boiling tubes, 10 boiling capillaries, calibration set M-560/565, sample holder, packing wire and…

  • Polypropylene Syringe Filter Holder

    Advantec MFS

    …Luer-lock. Outlet: Luer slip. Use hand tightening only. Autoclavable. Applications: Ultraclean and sterilize liquids. Use for aseptic sampling of liquids or gases at point-of-use. Convenient in the field or laboratory. Please Note: ALL Advantec items have a maximum 48 hour cancellation…

  • Scienceware® Captor™ Pen Holder

    Bel-Art Products

    Cap and Uncap Pens with One Hand Avoid fumbling and possible contamination of samples by keeping a marking pen handy and easy to uncap with only one hand. Ideal for use near an autoclave, incubator, centrifuge, storeroom, freezer or anywhere on the lab bench Adhesive backed,…

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    … Sintered glass, Stainless steel, or PTFE support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized…

  • Vacutainer® Holders

    BD

    …One Use Holder is compatible with the entire BD Vacutainer® Blood Collection System: BD Vacutainer® Eclipse Blood Collection Needle, BD Vacutainer® Safety-Lok™ Blood Collection Set, BD Vacutainer® Push Button Blood Collection Set and BD Vacutainer® Multiple Sample Luer…

  • Mount-Anywhere Tool Holders

    TrippNT

    …use items are needed. Ideal for use inside hoods, mounted on the side of computer monitors or by instruments and sample drop-offs. Model 9416G10 has a spacious book holder for storing lab books, instruction manuals or files. Model 9416G10 measures 12” x 5.75”; Model 9416G12…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.