Reaction Vessel Clamp

Compare Tool

Select up to 3 products

Reaction Vessel Clamp
1 - 32 of 34
Sort
View
Show
  • Resin Reaction Flasks And Supplies

    Corning

    …cover; without required clamp and gasket Clamping which is positive and quick-acting; easier to apply and remove than two-piece clamps Spring-action lugs which cannot crack flange Fiber knobs which are heat-resistant Ribbed Teflon gaskets, which reduce clamp pressure required…

  • Stainless Steel Quick Release Clamps

    Wilmad LabGlass

    Made entirely from stainless steel, these clamps firmly hold reaction vessels with Duran® flanges, and lids together. Quick release mechanism has a screw adjustment for tension control of flange.

  • Conical Flange Vessel Clamp

    Wilmad LabGlass

    This clamp is designed for reaction vessels/kettles with a conical flange. The top clamp is easily removed without disturbing the cover or body of reaction flask. Disassemble by loosening nuts. Includes extension rod for clamping to a laboratory stand. NOTE: Use with LG-8010 to LG-8050 vessels

  • Reaction Kettle Clamp

    Wilmad LabGlass

    This reaction vessel clamp for O-rings and flat flanges is a cast bronze ring with a black oxidized finish. Three insulated, spring activated clamping arms fit beneath the flange of the flask body. Simple pressure on the heat-resistant fiber knobs and a twist, permit attachment or removal.

  • Jacketed Cylindrical Reaction Vessels with Flat Flange

    Wilmad LabGlass

    These jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…

  • Cylindrical Reaction Vessels with O-Ring Flange

    Wilmad LabGlass

    These borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.

  • Stainless Steel McCarter Reaction Clamps

    Wilmad LabGlass

    Used to connect two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of…

  • PYREX® Cover for Reaction Kettles, 3 Side-Neck and 1 Center-Neck Standard Taper…

    Corning

    …to take an O-ring for a greaseless tight seal. Center neck and three side necks are 120° apart. All four necks have full length 29/42 Standard Taper outer joints. Viton® O-ring must be ordered separately. For O-rings, see No. 6946-R115; for stainless steel McCarter kettle clamps, see No. 6946B-115.

  • Cylindrical Reaction Vessels with Flat Flange

    Wilmad LabGlass

    …walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus preventing any weakening that might occur with a sharp shoulder. LG-8080 vessels use LG-7316-106 clamp; LG-8082 vessels use LG-7316-108 clamp.

  • 3 Neck Reaction Vessel/Kettle Cover

    Wilmad LabGlass

    …apart, these borosilicate glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or spherical reaction vessels with a 4" I.D. flange. NOTE: Use clamp LG-8070-100 for flasks beginning…

  • Jacketed Indented Cylindrical Reaction Vessel with Flat Flange

    Wilmad LabGlass

    reaction vessels have four indentations for improved stirring. They are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. Jacket has 1/2" hose connectors. NOTE: Uses LG-7316 clamps.

  • PVC Coated Open Extension Rings

    Troemner

    Ideal for supporting funnels, round bottom flasks, reaction vessels, and other apparatus that requires lower support. Opening in PVC coated aluminum ring allows for easy removal of sample container. PVC coating protects glassware. Long extension arm permits depth adjustment of the open ring from the…

  • 4 Neck Flat Flange Reaction Vessel Cover

    Wilmad LabGlass

    …a center neck and three side necks with full length outer Standard Taper joints, this borosilicate glass 4-neck reaction vessel lid/cover has a flat flange. Use LG-7316 clamps. NOTE: LG-8087 is designed to be used with LG-8080, LG-8084, LG-8085, and LG-8089 cylindrical reaction vessels.

  • Digi-Mantles

    Electrothermal (Bibby Scientific US)

    …is provided via a motorised rotating magnet assembly positioned to provide maximum magnetic flux linkage to rotate the stirrer bars in each reaction vessel. Key Features Same OMCA controller accommodates different capacity heating cartridges, i.e. interchangeable design Round bottom flask…

  • Reaction Flask Head

    Ace Glass

    reaction vessels that feature either a 137 x 100mmID or 168 x 130mmID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground flanges, please see our 6495 product family of gaskets. Note: vessels with o-ring grooves seal with just the o-ring supplied with the vessel.

  • 4 Neck Molded Reaction Vessel Covers

    Wilmad LabGlass

    reaction vessel lids/covers have a contact surface that is finely ground to provide a tight seal. Featuring a flat flange, these pressed lids have a center neck and three side necks with outer Standard Taper joints. Use LG-7316 clamps. NOTE: LG-8081 for use with LG-8080 cylindrical reaction

  • TC120 Series Heated Circulating Baths

    Grant Instruments

    …in vessels other than Grant tanks. Such vessels must have vertical sides and a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter) and a capacity of up to 50 litres. The control unit is attached to other vessels by means of a clamp. Applications…

  • Heating Circulators

    Grant Instruments

    …circulation (TC120) - Circulation of temperature control fluids to external apparatus / equipment Model available with/without clamp (T-clamp) - Conveniently converts vessels into stirred bath, offering excellent versatility Low-liquid detection (float switch) - Unit will cut-out when liquid…

  • TX150 R Series Refrigerated Circulating Baths

    Grant Instruments

    …English, French, German, Spanish and Italian Low liquid protection by float switch Adjustable over-temperature cut-out Convenient clamp for fitting to vessels Choice of five refrigerated (R) tanks with different facilities, working volumes and cooling capacities Cooling/heating range:…

  • Cylindrical Jacketed Reaction Vessels with O-Ring Flange

    Wilmad LabGlass

    These cylindrical borosilicate glass reaction vessels are jacketed with 1/2" hose connections. They have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. NOTE: Use LG-7316 clamps.

  • 3 Neck Flat Flange Reaction Vessel Cover

    Wilmad LabGlass

    …outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has a flat flange. For use with large capacity cylindrical reaction vessels, 2000mL, 3000mL and 4000mL (LG-8082, LG-8084, LG-8085, and LG-8089). Flange diameter is 6-5/8". All sizes use LG-7316-108 clamps.

  • 3 Neck O-Ring Flange Reaction Vessel Cover for Size 359 O-Rings

    Wilmad LabGlass

    …this borosilicate glass 3-neck reaction vessel lid/cover has an 6-5/8" flange O.D. and comes with a size 359 O-ring. Designed to be used with 2000mL, 3000mL, and 4000mL cylindrical reaction vessels (LG-8075, LG-8079A, LG8079B, and LG-8079C). NOTE: Use LG-7316-108 clamps with this lid.

  • 4 Neck O-Ring Flange Reaction Vessel Covers for Size 359 O-Rings

    Wilmad LabGlass

    …Standard Taper joints, this borosilicate glass 4-neck reaction vessel lid/cover has a 6-5/8" flange O.D. and comes with a size 359 O-ring. Designed to be used with 2000mL, 3000mL, and 4000mL cylindrical reaction vessels (LG-8075, LG-8079A, LG-8079B and LG-8079C). NOTE: Use LG-7316 clamps.

  • Coupling, Reaction Flask

    Ace Glass

    KF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…

  • Reaction Flask Head, Four Neck

    Ace Glass

    …6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground flanges, please see our 6495 product family of gaskets. Note: vessels with o-ring grooves seal with the vessel's supplied o-ring.

  • Reaction Flask Head, #7 Ace-Thred

    Ace Glass

    …6504,6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground flanges, please see our 6495 product family of gaskets. Note: vessels with o-ring grooves seal with the vessel's supplied…

  • Reaction Assembly, Ultrasonic, Large Volume, Complete

    Ace Glass

    Complete reaction assembly for sample volumes from 250ml to 1800ml. Included are three glass reactors [9837-20,9833-12,9833-16], power supply with converter [9810-24], 3/4in horn [9814-27], 3/4in extender [9816-08], (3) bushings [7506-12] and clamp ([9825-21].

  • Reaction Assembly, Ultrasonic, Small Volume, Complete

    Ace Glass

    Complete reaction assembly for sample volumes from 30ml to 200ml. Included are three glass reactors, power supply with converter, 1/2in horn, 1/2in extender, 1/4in microtip, slide adapter and clamp.

  • Head, Pressure Reaction, with Ace-Threds

    Ace Glass

    Rugged, heavy wall head for use with 6384, 6386, 6388, 6423, 6425, 6427, or 6429 reaction flasks. Duran flange supplied with a shallow O-Ring groove for use with mating grooved flask. #15 Ace-Thred center and various #15 and #7 side necks available allow connections under pressure conditions without…

  • Sublimation Apparatus, Vacuum

    Ace Glass

    …eliminate the use of grease and still avoid freezing. Kettle flange has a groove for a CAPFE O-Ring. Quick Release clamp secures head & kettle. Complete consists of Kettle Top, Kettle Bottom with O-Ring, Condenser, Stopcock Adapter, Condenser Tube, Pressure Bushing, (2) stoppers, and Flange Clamp.

  • Scale-Up Series™Jacketed Bench-Top Reactor

    Ace Glass

    …100mL to 6000mL on the bench and their geometry translates into our Kilo Scale reactors. Base systems include a flask, CAPFE o-ring, stand with supports and KF flange adapter clamp with FVMQ gasket. Add head, inlet/outlet connection adapters, condenser, funnel, etc. to complete your custom reactor.

  • Support Stand, Kilo Scale Reactors

    Ace Glass

    … Swing latch clamp for use with 200mm flanged vessels. Clamp²fits quickly and securely around the vessel's neck and rests²on a strip of compressable silicone. Stainless steel²mounting rod is 5/8in diameter, 14in length. Thomas No. 1165L86 Swing latch clamp for use with…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.