Polyethylene Membrane Filter

Overview Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility,…

Overview Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility,…

…A Laboratory Manual , Cold Spring Harbor p. 203]. Other Notes: For life science research only. Not for use in diagnostic procedures. Physical form: Solution, filtered through 0.2 μm pore size membrane, 50% PEG 1500 (w/v) in 75 mM Hepes (pH 8.0), bottled under nitrogen, ready to use

…or PET, range in size from 850 cm² to 4250 cm² growth area and are available either with standard or filter screw caps. The filter membrane is a hydrophobic capillary pore membrane with a defined pore size of 0.2 μm that guarantees optimal protection against contamination. It provides a…

…diameter filter membrane integrally sealed to a support grid designed to maximize flow and reduce foaming and protein denaturation. The filter funnels, dust covers and receiver/storage bottles are manufactured from polystyrene. Tubing adapter, filter adapter ring and plug seal cap are polyethylene…

…for vacuum filtration, centrifugation or positive pressure techniques Polyethylene Terapthalate (PET) frit in fritted plate; 20 µm pore size Glass fiber plate has PET frit and 2 layers of glass fiber membrane for binding of DNA Shared wall configuration gives reduced plate height,…

…Sterile Cap contains 0.22 mm hydrophobic filter, which prevents wetting and bacteria from growing through membrane while allowing quick, stable buffering in aCO₂ incubator. Filter membrane has a three-dimensional matrix of polyethylene fibers. Plug-seal cap guarantees maximum seal…

… Filter plates different membrane types and pore sizes / diameters cellulose mixed ester (0.2 µm or 0.45 µm) RC (regenerated cellulose, 0.2 µm or 0.45 µm) PTFE (polytetrafluoroethylene, 0.2 µm, 0.45 µm, 1 or 3 µm) PE (polyethylene, 20…

…indicate that the sample be inserted in the blue side, so the aliquot is extracted from the clear side after blending. The dividing filter membrane has 1840 holes per square inch with a pore size of approximately 330 microns. This pore size has proven to be very effective for the majority…

…membranes. Pores sizes of 0.2 or 0.45 µm are available for CA and CN membranes. NY and PES are available only in 0.2 µm pore size. Filters are color-coded by membrane type for fast and easy identification. Prefilters are included. Polystyrene funnels have either 33 or 45-mm polyethylene screw…

…Nitrocellulose, Polyethylene, Glass Fiber Membrane Diameter: 25 mm Pore Size: 0.20 μm, 0.22 μm, 0.45 µm, 0.80 µm, 1.20 µm, 5.00 µm and others Applications HPLC sample preparation Biological fluids Buffer solutions Sterile filtering of…

Sterile Flask of optically clear polystyrene, tissue culture treated Plug seal screw cap of polyethylene Incorporate a 0.2 micron microporous membrane filter into a standard Corning® Falcon® plug seal cap to prevent contamination while providing improved consistency in gas…

…Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile, single-use…

…(PES) membrane for mycoplasma removal. These new 1000mL Systems are designed for filtering and storing cell culture media, biological fluids and other aqueous solutions. The new system consists of a 1000mL polystyrene receiver bottle and filter funnel with a 54.5cm² membrane and a polyethylene neck…

…for filtering and storing cell culture media, biological fluids and other aqueous solutions. The new system consists of a 500mL polystyrene receiver bottle and filter funnel with a 33.2cm² membrane and a polyethylene neck adaptor with hose connector. Polyethersulfone (PES) membranes provide…

…of organic solvents. For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines Hydrophobic PTFE Membrane is compatible with more aggressive organic solutions and can also be used to filter aqueous solutions Polyethylene housing Pack of 50

…cleaning. Solvent dispenser has an integral, stainless steel membrane filter holder (XX4002500) which can also be used by itself for in-line pressure filtration of gases Includes filter support screens, fluoroelastomer filter holder gaskets and pressure rated polyethylene tubing (6-Feet)

…consist of a 1000mL polystyrene receiver bottle and filter funnel with a 0.22 µm pore 54.5cm² cellulose nitrate membrane and a polyethylene neck adaptor with hose connector. Cellulose nitrate (CN) membranes are good for filtering buffers where protein binding is not a concern …

This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. 25 mm syringe filter is recommended for filtering 10–100 milliliter (mL) volumes to remove particles prior to instrumentation…

This 25 mm syringe filter with a Graduated Glass Fiber & Nylon membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of aqueous & mild organic solutions with high particulate levels. Low-extractable polyethylene housing Female Luer-Lok™ inlet…

…SBS standards, for quick, secure connection to bioreactor equipment. labForce® Polypropylene screw caps are vented with 0.2µm membranes to increase air transmission and enhance cell growth Vented Caps 0.2µm Filter Available in 2 sizes for multiple fits

…scale build up on the membrane surface to improve performance. Unit automatically alerts user when pretreatment and MPS cartridges need changing. Optional reservoir holds up to 60 liters and is made of rigid fluorinated polyethylene. The reservoir is filtered to prevent airborne contamination.…

…independent cartridges with Aquastop quick connects for fast replacement. Module 1 - Combination of pretreatment and the reverse osmosis membrane M odule 2 - Polishing cartridge contains high-quality ultrapure resin for consistent purity and long cartridge life Easy-to-operate…

…Corning® Disposable Spinner Flasks (Cat. No. 3561) Cap is made of high density polyethylene; autoclaving is not recommended The venting port ends in a 25mm diameter vent filter with a 0.2µm pore PVDF membrane and a barbed fitting The liquid transfer port has an internal end with a…