Peek Ferrule

Material: PEEK nut and ferrule Packaging: pkg of 10 ea I.D.:  0.0625 in. (1.5875 mm) Fitting:  nut and ferrule 10-32 General description The one-piece fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found…

…choice for tubing assemblies and will stay tight even through vibration. One-piece PEEK fittings are reusable that require no swaging. Two-piece fittings come with ferrules with lock ring to hold the ferrule in place, preventing the nuts from sliding off in tubing assemblies. The lock ring also…

Cost-effective protection for UHPLC systems Reliable way to extend column lifetime Universal fit—connects easily to any brand column Leak-tight to 15,000 psi (1,034 bar) 0.5 µm or 0.2 µm titanium frit in a stainless steel body with PEEK ferrule

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

…knurled stainless steel nut and a double ended PEEK™ ferrule. The PEEK™ ferrule simply slides over any 1/16" OD tubing to its required position, while the nut is finger tightened. Unlike stainless steel, the PEEK™ ferrule will not crush the tubing and can be easily readjusted…

PerkinElmer offers a variety of stainless steel, titanium andpolymer based nuts, ferrules, unions and tubing for plumbing thecomponents of your LC system.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Titanium nut with integrated PEEK ferrule simplifies installation—one-piece design means no more lost ferrules. Convenient, built-in driver makes secure installations quick and easy. Allows easy 18,000 psi (1250 bar) seals without wrenches. Can be installed repeatedly with­out…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

RheoFlex PEEK Nut and Ferrule Set, Pkg. 10

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Keep you operation running smoothly by keeping replacment parts handy Max pressure 6000 psi (414 bar) 10/PK

…is supplied with two PEEK hex-head nuts and ferrules. These fittings grip the tubing in two locations for a more reliable connection. Rheodyne Sample Loops are made of natural PEEK. This means no dye leaching into your sample. Like metal loops, the size designations of PEEK loops are nominal. The…

…is convenient to use because the ferrule will not stick in a receiving port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit. The Upchurch PEEK Fingertight fittings are for use with…

Ideal for quickly and reliably connecting PEEK tubing in HPLC systems One-piece, finger-tight fittings—no ferrules required Low dead volume Included end fittings and body made of biocompatible PEEK Available in 0.25, 0.50, and 0.75 mm bore sizes Maximum temperature: 100°C …

For use with SLIPFREE connectors for HPLC columns Vespel ferrules replace the standard Vespel ferrules supplied with SLIPFREE column connectors Kel-F and PEEK are offered for applications in which Vespel is not suitable

…is supplied with two PEEK hex-head nuts and ferrules. These fittings grip the tubing in two locations for a more reliable connection. Rheodyne Sample Loops are made of natural PEEK. This means no dye leaching into your sample. Like metal loops, the size designations of PEEK loops are nominal. The…

…RheFlex M4 Fitting Eliminates the need for separate nuts and ferrules The combination of a one-piece nut and ferrule makes connections easier and faster. The fitting features a unique seal-tight grip. When used with PEEK tubing sleeve, the fitting can hold up to 5000 psi (345 bar). They…

…made from PEEK tubing and fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically inert polymer ideal for HPLC applications where metal surfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts and ferrules. These…

…made from PEEK tubing and fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically inert polymer ideal for HPLC applications where metal surfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts and ferrules. These…

…made from PEEK tubing and fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically inert polymer ideal for HPLC applications where metal surfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts and ferrules. These…

…made from PEEK tubing and fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically inert polymer ideal for HPLC applications where metal surfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts and ferrules. These…

…to the Model 7725 stainless steel injector, but the materials are different: the loop, nuts, ferrules, stator, and vent lines are made of PEEK, polyetheretherketone; the rotor seal polymer is Tefzel. PEEK has an outstanding combination of strength and inertness. The operating pH range is 0 to 14.…

Titanium nut with integrated PEEK ferrule simplifies installation—one-piece design means no more lost ferrules. Convenient, built-in driver makes secure installations quick and easy. Allows easy 18,000 psi (1250 bar) seals without wrenches. Can be installed repeatedly with­out…

…thread fittings use a non-swaging Kel-F™ or PEEK™ replaceable ferrule Inert contact surfaces make them biocompatible Ideal for applications where corrosive solvents are being used Hexnut with Kel-F™ or PEEK™ ferrules are recommended for use with SGE GLT™…

…Patented ferrule can be installed repeatedly without compromising high-pressure seal Hybrid design combines the durability of titanium with the sealing ability of PEEK Cutting-edge system provides ZDV (zero dead volume) connection to any 10-32 female port Compatible with 1/16" PEEK and…

…loss due to shear or adsorption Maximum operating pressures are 3000psi for 10µL, and 20µL loops Supplied with PEEKsil™ tubing and two sets of Stainless Steel Hexnuts™ with PEEK ferrule fittings Compatible with most valves including Rheodyne® and Valco®

…high pressure Cheminert metal loops include two 1/16 in. stainless steel nuts and two stainless steel ferrules Cheminert PEEK loops include two PEEK nuts and two PEEK ferrules Agilent Technologies products are intended for sale/shipment within the US only. International customers…