Inline Filter

Compare Tool

Select up to 3 products

Inline Filter
1 - 32 of 114
  • HEPA-Cap Disposable Inline Filter

    GE Healthcare

    Disposable in-line filter retains 99.97% of all particles greater than or equal to 0.3 µm Provides clean/sterile air and gases Durable polypropylene Two sizes available HEPA-CAP housing is made of durable polypropylene. Media is laminated hydrophobic-treated glass microfiber. To ensure clean…

  • In-line Filter


  • Omnifit® Inline Filters


    …inert flow path with all PTFE wetted parts Simple filter replacement Use PTFE inline filters with aggressive and high-purity fluids. Filters remove particulates from the medium protecting instruments downstream from particulate damage. Each filter housing holds a removable PTFE filter.

  • Click-On Inline Filters

    Thermo Scientific

    …end fittings reduce cost of clean gas: remain installed during filter replacement TUEV approved Maximum pressure 11 bar (160 psi) Maximum flow 25L/min. Combi filter removes oxygen and moisture, or moisture and hydrocarbons Triple filter removes oxygen, moisture and hydrocarbons

  • High-Pressure Frit-Type In-Line Filter


    Restek’s high-pressure in-line filter is a stand-alone version of the Trident column protection system, specifically designed for ease of use, low dead-volume, and flexibility. The filter has a replaceable, PEEK encapsulated 316 stainless steel frit with a surface area of 12 mm 2 . The…

  • Solenoid In-Line Filter


    Replacement 10 micron filter for P/N 09903665.

  • Polypropylene In-Line Filter Holder

    Advantec MFS

    Thermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…

  • Whatman Polydisc In-line Filters, TF

    GE Healthcare

    …particularly suitable for protective vents, in-line filtration, and isolation applications. The Whatman filter line from GE Healthcare’s Life Sciences business offers a wide range of high throughput, in-line options Polydisc TF aggressive solvent filter Filtering organic solvents and aggressive…

  • In-Line Filter Holder

    Pall Life Sciences

    Lightweight Filter Holder for Particulate Sampling Domed inlet provides uniform sample distribution on the filter Delrin plastic offers broad chemical compatibility and material strength Accepts 25mm filter discs Lightweight for venting and air monitoring applications

  • PFA In-Line Filter Holder


    Nonwetting and nonsticking filter holder is suitable for organic solvents, acids, alkalies, or high-purity filtration. Temperature range is –320 to 500°>F (–196 to 260°>C). Withstands up to 65 psi. Change filter without disconnecting tubing with Tefzel® ETFE clamp…

  • Whatman Polydisc In-Line Filters, Heavy Duty

    GE Healthcare

    Polydisc HD (Heavy Duty) from GE is a durable all-polypropylene in-line filter for large volumes of liquid samples containing even harsh chemical solvents. In-line, hose-connected filter with up to 1000 mL capacity High flow filter with durable all-polypropylene construction Broad aqueous and…

  • In-Line Filter Trap


    Gas contacts only glass, metal and the adsorbents for purity. The Drierite ® indicator and molecular sieve 5A are packed in glass protected by an outer plastic tube in the event that the glass breaks. Unique loading design allows operation in any orientation without channeling. Designed for GC…

  • Whatman Polydisc In-Line Filters, Ground Water

    GE Healthcare

    …Polydisc GW (Ground Water) is an in-line filter specifically designed for preparation of ground water samples for dissolved heavy metal analysis. Whatman brand filter options from GE Healthcare’s Life Sciences business offer a wide range of high-throughput, in-line choices for a variety of…

  • Whatman Polydisc In-Line Filters, Aqueous Solution

    GE Healthcare

    …(Aqueous Solution) in-line filters from GE feature high-throughput PES membranes with a glass microfiber prefilter. Polydisc comes presterilized in medical-grade blister packs. Whatman disc filters from GE Healthcare’s Life Sciences business offer a wide range of high-throughput, in-line options. …

  • Whatman Polydisc In-Line Filters, Serum Prefilter (SPF)

    GE Healthcare

    in-line options. Disc filters for serum prefiltration Filtering serum requires removing proteins, lipids, salts, and other cell debris. This range of particulate matter is effectively handled with multi-layer prefilters to facilitate downstream work and to avoid clogging later serum filters.

  • High-Pressure Cup-Type In-Line Filter


    This high-pressure cup-type filter can be used in fluid streams operating to 15,000 psi (103,421 kPa). The cup-shaped filter elements have a large (2.5 cm 2 ) surface area to give long operating lifetime. Mounted in screw-type adapters, they are easily removed for cleaning. Normally, backflushing…

  • Whatman ReZist In-Line Vent Filter

    GE Healthcare

    filter devicesAppropriate for in-line HPLC sample preparationReZist in-line filters are lightweight air venting units suitable for protective vents, in-line filtration, and isolation applications when working with chemically harsh solvents. ReZist in-line filters are part of the Whatman in-line

  • UltraLine UHPLC In-Line Filter


    In-line design installs easily with standard fittings Cost-effective protection for UHPLC systems Reliable way to extend column lifetime Leak-tight to 15,000 psi (1,034 bar) Replaceable 0.5 µm stainless steel frit in stainless steel body



  • Frit for 1290 Inline Filter

    Agilent Technologies

  • Whatman Aqueous In-Line Filter/Degasser (IFD)

    GE Healthcare

    … The Aqueous IFD is designed to work as an in-line filter with mobile phases containing at least 20% of the aqueous component. It has a 0.2 µm hydrophilic nylon membrane to support aqueous-based HPLC mobile phase preparation. In-line filter construction and function Whatman Aqueous IFD…

  • Aqueous IFD And Solvent IFD In-Line Filters/Degassers

    GE Healthcare

    …(Bubble Point Method) Air vent on inlet with luer lock cap Nylon or Polypropylene (PP) filter media Whatman in-line filter/degassers (IFD) connect directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Aqueous IFD provides pure filtration of…

  • 7 µm In-Line Filters


    This 316 stainless steel filter is designed to collect particles larger than 7 microns. We offer Siltek-treated and stainless steel versions (1/4" compression fitting on both ends). Note: frit is not replaceable.

  • BTI Inline: Filters Breakthrough Indicators Inline


    Filters Breakthrough Indicators Inline for Acids, Ammonia, Ammonia & Hydrogen Sulfide, Basic Vapors, Formaldehyde, Humidity, Hydrazine, Hydrogen Sulfide and Mercury. The BTI Inline is colorimetric indicator that indicate the saturation and exhaustion of carbon adsorbers and filters.The BTI…

  • Vented In-Line Filter Holder, Stainless Steel

    Advantec MFS

    47mm filter diameter Available in type 304ss or 316ss Filter liquids or gases at point-of-use This 47mm in-line holder (model KS47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The…

  • Whatman Solvent IFD In-Line Filter/Degasser (IFD)

    GE Healthcare

    …suitable to filter and degas these solvents. In-line filter design The Solvent IFD’s all-polypropylene housing is sealed by a security ring. The filter includes fittings to accommodate 1/16”–1/8” tubing and an air vent on the inlet with luer lock cap to enable priming. The in-line filter works…

  • Stainless Steel Gas In-Line Filter Holders

    Advantec MFS

    Threaded locking ring enables filter changes without disconnecting the gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow. Tighten by hand only - hand torque maximum is 15 lbs/in. Type 304ss body and support screen.…

  • Chemically Resistant PFA In-Line Filter Holders

    Advantec MFS

    Filter acids, alkalis, or organic solvents Dual support screens allow flow in either direction Perfluoroalkoxy(PFA) polymer is very similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow…

  • High Pressure In-Line Filter Holder, Stainless Steel

    Advantec MFS

    High-quality and durable, this 47mm stainless steel in-line pressure holder can operate at high pressures up to 1420 psi (9.8 MPa). Standard FPM(Viton) O-rings are compatible with many aggressive liquids and gases. Type 304ss body and type 316ss sintered support screen. An optional…

  • Whatman HEPA-VENT Vent Filters

    GE Healthcare

    …air filter HEPA air filter products offer particle retention of even heavily particulate-laden air samples. Whatman HEPA-VENT filters are highly suited for applications where high retention, dirt-holding capacity, and flow rates are required. They are typically used as in-line filters during…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.