Glass Distiller

U.V. Absorption - 1cm cell vs. H₂O wavelength (nm) 400 350 340 330           A 0.01 0.02 0.10 1.0          

UV Absorption - 1 cm cell vs H₂O wavelength (nm) 290 270 260 255 245 A 0.01 0.02 0.05 0.15 1.0 Assay         99.7% min. Evaporation Residue         …

CAS #: 628-63-7 UN #: UN1104

Synonyms: Heavy water; Water-d₂ Formula: D₂O Formula Weight: 20.03 CAS No.: 7789-20-0 Density: 1.107 g/mL at 25 °C(lit.) Packaging: 100 g in glass bottle

FI-Streem III for general lab uses Four and eight liter/hour Glass components assure virtually no leaching of impurities into the distilled water Microprocessor controlled Easy to operate membrane-type touch pad control panel Patented vapor trap eliminates carry-over of vapor-borne water…

Ai GLASS THIN FILM DISTILLATION SYSTEM FEATURES  High precision PTFE rollers (or blades) and inner glass surface allow a complete and uniform thin film on the heated surface, and prevent process residue  Pre-installed cooling/heating tubing with fluid direction labels and M16…

Similar to CG-1235, but with the lower stopcock replaced with a 0-14mm treaded valve having Perfluoro o-rings and a 1/2” O.D. glass distillate takeoff for use with PFA compression tubing fittings. Adapter has two top outer joints and a lower inner. Style “B” with lower angled…

For use as distillation column packing, mixing beads, and boiling stones. Each 454 g box has a packing volume of approx. 360 cm3. +/-10% variation in bead size.

…glass joints 1 Distilling Arm with 24/40 ground glass joints (#4009) 1 Support Stand 1 Support Ring and Clamp (#4-SRC47) 1 Burette Clamp (#4-BC37) 1 Glass Stopper (#4007-GS)   These Distillation Arms are made from borosilicate glass. Each have a 24/40 ground glass…

3 to 6 mm in diameter Diameter tolerance is ±0.75 mm PYREX solid glass beads are useful for packing in distillation columns, mixing beads and boiling stones. Beads are packaged in 0.45 kg (1 lb) boxes, which have a packing volume of approximately 360 cm 3 or 22 cubic inches.

… 1 Distillation Flask with Thermometer Holder, 1L with a 24/40 ground glass joint (#FLSK-24-40-1L) 1 Biomass Flask 1 Distilling Arm with a 45/50 ground glass joint (#4009-45-50) 1 Distillation Separation Tube (#SPTB-PTFE) 1 Liebig Condenser, 300mm long with 24/40 ground glass joints…

…set features high quality borosilicate glass parts and all hardware necessary for simple distillation experiments. Includes: 500ml Round Bottom Borosilicate Flask with Side Tube 300mm Graham Condenser 250ml Erlenmeyer Flask Glass Stopper Support Stand (6"X9")…

…test quantities that need to be dried quickly and carefully, using a method that can be reproduced. Substances can also be distilled, sublimated or freeze dried. A glass tube with an electrically conductive coating serves as the heating element. The transparent sample area is visible so if there…

…test quantities that need to be dried quickly and carefully, using a method that can be reproduced. Substances can also be distilled, sublimated or freeze dried. A glass tube with an electrically conductive coating serves as the heating element. The transparent sample area is visible so if there…

These distillation flasks are made from high-quality borosilicate glass. They come with a thermometer holder and a ground glass stopper. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth…

The high quality laboratory grade Distilling Apparatus is provided with Borosilicate Glass Pieces that feature 24/40 Ground Joints which allow secure fits and ease in assembling the apparatus. The complete kit includes a Kjeldahl Bulb, Graham Condenser with coil for greater cooling surface - 250mm,…

These borosilicate glass distilling receivers with inner and outer Standard Taper joints are used to determine the amount of dilution in crankcase oils when gasoline has been used as fuel. Receiver design keeps heat-sensitive materials away from the hot base of the flask. Calibrated "to…

This kit contains essential components for short path distillation. All glass parts are manufactured from high quality 3.3 borosilicate glass. Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port features a condenser coil and three ¼” hose nozzles, two for…

Formula: HCONH₂   Formula Weight: 45.04   CAS #: 75-12-7 Specific Gravity: 1.128-1.132 Glass Distilled. Exceeds A.C.S. Specifications

Vacuum adapters have 24/40 joints. Bent adapter has a 105° angle between the top outer joint and bottom inner joint. Straight adapter has a top outer joint and bottom inner joint. Both adapters have 24/40 joints and include a 3/8" hose connector.

Designed specially for handling and storing sterile culture media and sera where stability of the glass is of prime importance. Serum bottles are also suitable for storing distilled water and standard solutions. PYREX bottles have the strength to withstand hot air (dry) or steam (wet)…

For connecting distilling column with vertical condensers. Top joint 10/30 is for 76 mm immersion thermometer. Side arm at 75 degree , vertical side arm 17.8cm from center tube.

Vacuum distillation head featuring glass or PTFE stopcock plugs which allow the receiver to be removed from the head without disturbing the refluxing solvent. All joints are 24/40 with the exception of a 10/18 thermometer joint which will accept our 5028-24 adapter and 6.4mm thermometers such as our…

With outer joint and external thread at top for making an O-RING-CAP-SEAL connection with mating male joints, inner joint at bottom and at 75 degree angle. Supplied with cap and O-Ring.

Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port. Distillation head is manufactured from high quality 3.3 borosilicate glass and features a condenser coil and three 1/4" hose nozzles, two for condenser and one for vacuum.

A compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. Column is vacuum jacketed. The indents are positioned to cause the vapor to follow a spiral path. Approximately three theoretical plates at 60mL/hr. Hold up to 1.2mL operating, 0.5mL static.…

A compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. The indents are positioned to cause the vapor to follow a spiral path, adding to the efficiency of the unit. By use of the three-way stopcock, a manifold arrangement is achieved, making it possible…

Adapter is used to connect distilling column with vertical condensers. With standard taper outer joint at the top for use with 10/18 or 10/30 jointed thermometers. Both lower inner joints are the same size. Side arm is at a 75º angle to the vertical tube. For thermometers see CG-3506-N.

With finger type condenser and 0-3 mm PTFE stopcock plug with PTFE ring seals for reflux control. The seals prevent O-Ring exposure to corrosive liquids and are backed up by a FETFE O-Ring. Thermometer joint is 10/30, all others are 14/20.

Calibrated to contain. Supplied in 10mL capacity with 0.2mL subdivisions.

With upper joint at 105 degree angle. For operation other than at atmospheric pressure. Vacuum is applied to the side arm with the T-bore stopcock. The secondary receiver is vented by means of the lower stopcock. The capacity from the bottom of the drip to the stopcock is 2.5mL.Tubing connections…