Funnel

Long and short stem funnels are ideal for filtering Molded to an accurate 60° angle for ease in fitting filter paper Beaded rim for mechanical strength Long stem, which is constructed of heavy wall tubing Molded to an exact 58° angle , which increases filtering speed High resistance to…

Beaded rim and short, large bore stem Funnel i.d. and stem o.d. listed respectively

For standard filter papers Body is at 60° angle with internal ribs at 58° for rapid filtration Outside ribbing eliminates air lock Autoclavable

Funnel, 100 ml Funnel, 300ml

…class 100,000 packed and individually bagged Disposable funnels are ideal for food and pharmaceutical applications These Cole-Parmer® essentials powder funnels are ideal for transferring powders and granules. Disposable funnels are packaged in class 100,000 cleanroom and individually…

Utility funnel set made of polypropylene or high density polyethylene. They are inexpensive, lightweight and designed for general use. Funnel set consists of 1233 series funnels: 4 oz polypropylene (1211A40), 8 oz polypropylene (1211A41), 16 oz high density polyethylene (1211A42), 32 oz high…

Heavy-duty polyproylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. Funnels feature long, narrow stems, making them idea for use with liquids. Funnels have internal and external ribbing to prevent air lock. Funnels are angled at exactly 60° for rapid…

This funnel is intended to fill burettes. It is made from borosilicate glass, and has a 40mm funnel diameter, a 38mm stem, and 10mm stem diameter. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.

Microsart Funnel 100 250 are sterile 100 ml and 250 ml respetively plastic funnels. They allow quick performance of the filtrations required in the routine testing of water, food and beverages, pharmaceutical and cosmetic products.

Made of either polystyrene or polypropylene Both are tapered at a 60° angle with inside fluting.

Good quality glazed porcelain. Acid and alkali resistant. Sold as eaches.

…and stable funnel stand, resistant to chemicals, shatter-proof and with continuously variable height adjustment. The funnel stand is suitable for all funnels from 40 to 180 mm in diameter. The funnel holders can be used with reducing inserts for small funnels. The funnel stand also makes…

The Humboldt Funnel Support is designed to accept up to four funnels. The unit consists of a hard wood support with four slotted holes and a metal clamp with thumbscrew for support rod mounting.

Constructed of hardwood, with clear laquer finish Holes are spaced 132 mm center to center. Maximum height approximatelly 48 cm; minimum 38 cm.

•Sit flat on balance - No rolling, no spilling! •Pouring necks designed to fit volumetric flasks, micro-tubes or any narrow neck apparatus for spill free transfer •Residual sample can be rinsed to guarantee 100% transfer •Suitable for safe handling of hazardous materials •Available in five…

•Sit flat on balance - No rolling, no spilling! •Pouring necks designed to fit volumetric flasks, micro-tubes or any narrow neck apparatus for spill free transfer •Residual sample can be rinsed to guarantee 100% transfer •Suitable for safe handling of hazardous materials •Available in five…

•Sit flat on balance - No rolling, no spilling! •Pouring necks designed to fit volumetric flasks, micro-tubes or any narrow neck apparatus for spill free transfer •Residual sample can be rinsed to guarantee 100% transfer •Suitable for safe handling of hazardous materials •Available in five…

•Sit flat on balance - No rolling, no spilling! •Pouring necks designed to fit volumetric flasks, micro-tubes or any narrow neck apparatus for spill free transfer •Residual sample can be rinsed to guarantee 100% transfer •Suitable for safe handling of hazardous materials •Available in five…

Permits solutions to be prepared with No. 13654-24 Stirring Magnet and added portion wise. The T-bore stopcock in the equalizing arm permits isolation of the contents for storage. Capacity, 100 or 250mL. Lower threaded stopcock is all PTFE. Outer joint is standard taper 14/20 or 24/25, inner joint…

These polypropylene powder funnels feature a wide spout for easy transfer.

Similar to CG-1742, but supplied without the PTFE stopcock plug or the flask-length stopper.

This non-corrosive funnel holder, molded in PP, can hold funnels with diameters of 3" to 6". The extra plate provided can be placed to hold funnels having diameter 1" to 3". Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.

These economical disposable funnels are available in either transparent polystyrene or translucent polypropylene. They are lightweight, have reinforced rims and inside fluting. They are tapered at a 60° angle. Available in 55mm and 65mm widths Available in Polystyrene (PS) and Polypropylene…

This non-corrosive separatory funnel holder, molded in PP, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.

Separatory Funnel Platform Holds 3 funnels at once on an 18 x 18" (45.7 x 45.7cm) platform Accommodates 500mL to 2L separatory funnels Stainless steel construction

Funnel adapters for use with 145 and 147 series analytical test filter funnels, bulk-packed Polypropylene, non-sterile

Accessories for Microsart Funnel 100 250

The Scienceware® Separatory Funnel Rack allows the use of a variety of funnel sizes for a different experiments. With adjustable diameter funnel slots, this rack accepts funnel sizes from 100cc to 1000cc. In addition, the two support tiers can be independently adjusted to any height on long…

Our Buchner Funnel with perforated plate is manufactured with the highest standards and are glazed inside and out with the exception of the rim.

These autoclavable, table-top Buchner funnels are ideal for vacuum filtration. Includes a tubulated side outlet and accepts standard filters. The 750ml size is 60mm tall, 147mm in diameter, requires 125mm filter paper and the side outlet is 5/8" (16mm).